Description
Cat-Back Exhaust
This Atlas Cat-Back exhaust system is constructed of 4 in. mandrel-bent steel. Comes with Tubing; OE Style bayonet hangers; band clamps and all hardware necessary for a hassle free installation. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower and torque. Installation is a snap. This system uses all factory mounting locations providing stability and a hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface eliminating leak paths. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions.
Additional Information
ATLAS 4 IN Aluminized Steel Cat-Back Exhaust System w/ Muffler & Black Tip Ford F-150 15-20 V6-2.7L/3.5L (tt)
Product Overview
A true 5" from the down-pipe back, the new ATLAS exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 5" aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTâs. This system is available in 5" down-pipe back without muffler. ATLAS exhaust systems are the perfect combination of performance, fit and value.
*Installation is a Snap:*
ATLAS exhaust systems utilize a 2-piece tailpipe design for a perfect fit by allowing adjustability at the tailpipe section. All systems use factory mounting locations providing stability and hassle-free installation.
*Leak-Free Seal:*
High quality OE style flange and band clamps are used for a complete 360 degree sealing surface.
*Aggressive Sound:*
A muffler delete-pipe is used for a true race-inspired sound and maximum flow.
*Perfect Fit:*
OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.
*Flow and Performance:*
ATLAS exhaust systems are constructed of 4" or 5" mandrel bent aluminized steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTâs.
*Note:* This is a *"Race Only"* product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws.
| Additional Application Notes | |
|---|---|
| • Extended Cab Pickup; w/ G Engine VIN; 97.6in Bed Length; Extended Cab Pickup; 97.6in Bed Length; Extended Cab Pickup; 78.9in Bed Length; Crew Cab Pickup; 67.1in Bed Length; 4 in. Tubing; Aluminized Steel; Incl. Muffler/Hangers/Clamps/Black 6in. Stainless Steel Tip w/Laser Cut SS aFe Power Plate | |
| • Extended Cab Pickup; w/ G Engine VIN; 97.6in Bed Length; Extended Cab Pickup; 97.6in Bed Length; Extended Cab Pickup; 78.9in Bed Length; Crew Cab Pickup; 67.1in Bed Length; | |
| • Standard Cab Pickup; w/ G Engine VIN; 97.6in Bed Length; Standard Cab Pickup; w/ G Engine VIN; 78.9in Bed Length; Standard Cab Pickup; w/ 8 Engine VIN; 97.6in Bed Length; Standard Cab Pickup; w/ 8 Engine VIN; 78.9in Bed Length; Standard Cab Pickup; 97.6in Bed Length; Standard Cab Pickup; 78.9in Bed Length; Extended Cab Pickup; w/ G Engine VIN; 97.6in Bed Length; Extended Cab Pickup; w/ G Engine VIN; 78.9in Bed Length; Extended Cab Pickup; w/ 8 Engine VIN; 97.6in Bed Length; Extended Cab Pickup; w/ 8 Engine VIN; 78.9in Bed Length; Extended Cab Pickup; 97.6in Bed Length; Extended Cab Pickup; 78.9in Bed Length; Crew Cab Pickup; w/ G Engine VIN; 78.9in Bed Length; Crew Cab Pickup; w/ G Engine VIN; 67.1in Bed Length; Crew Cab Pickup; w/ 8 Engine VIN; 78.9in Bed Length; Crew Cab Pickup; w/ 8 Engine VIN; 67.1in Bed Length; Crew Cab Pickup; 78.9in Bed Length; Crew Cab Pickup; 67.1in Bed Length; | |
| • Standard Cab Pickup; w/ G Engine VIN; 97.6in Bed Length; Standard Cab Pickup; w/ G Engine VIN; 78.9in Bed Length; Standard Cab Pickup; w/ 8 Engine VIN; 97.6in Bed Length; Standard Cab Pickup; w/ 8 Engine VIN; 78.9in Bed Length; Standard Cab Pickup; 97.6in Bed Length; Standard Cab Pickup; 78.9in Bed Length; Extended Cab Pickup; w/ G Engine VIN; 97.6in Bed Length; Extended Cab Pickup; w/ G Engine VIN; 78.9in Bed Length; Extended Cab Pickup; w/ 8 Engine VIN; 97.6in Bed Length; Extended Cab Pickup; w/ 8 Engine VIN; 78.9in Bed Length; Extended Cab Pickup; 97.6in Bed Length; Extended Cab Pickup; 78.9in Bed Length; Crew Cab Pickup; w/ G Engine VIN; 78.9in Bed Length; Crew Cab Pickup; w/ G Engine VIN; 67.1in Bed Length; Crew Cab Pickup; w/ 8 Engine VIN; 78.9in Bed Length; Crew Cab Pickup; w/ 8 Engine VIN; 67.1in Bed Length; Crew Cab Pickup; 78.9in Bed Length; Crew Cab Pickup; 67.1in Bed Length; 4 in. Tubing; Aluminized Steel; Incl. Muffler/Hangers/Clamps/Black 6in. Stainless Steel Tip w/Laser Cut SS aFe Power Plate | |
These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.
Features
- 2 Year Limited Warranty
- 50 State Legal
- Aggressive Sound
- Aluminized Steel
- Black Tip
- Free Flow Muffler
- Hassle Free Installation
- Increased 322 HP
- Increased Torque 28 ft./lbs.
- Mandrel Bent
- OE Hanger Locations
Important Notice relating to US Domestic Market Trucks & Pickups
Many US-market trucks and pickups are available in multiple cab and bed-length configurations (e.g., Single Cab, Extended Cab, Double/Crew Cab, CrewMax, 5.5ft/6.5ft/8ft beds, etc.). Exhaust system fitment can vary between these chassis versions.
Where available, we list all compatible vehicles, cab types, and bed lengths in the product description. However, depending on your exact configuration, some systems may require optional extension/mid-pipes or minor modification for correct fitment.
Because of these variations, please carefully check your cab configuration and bed length before purchasing. If you are unsure, or if your vehicle has been modified, please reach out to a StreetFX agent.
(keyword: cat-back)Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Specifications
Product Details
| Description: | ATLAS 4 IN Aluminized Steel Cat-Back Exhaust System w/ Muffler & Black Tip |
| Exhaust Type: | Cat-Back |
| Exit Position: | Rear |
| Exit Style: | Straight |
| Inlet Inside Diameter: | 4 |
| Inlet Size (in.): | 4 |
| Material: | Aluminized Steel |
| Outlet Outside Diameter: | 4 |
| Outlet Size (in.): | 4 |
| Part Number: | afe49-03069-B |
| Tail Pipe Material: | Aluminized Steel |
| Tip Size: | 6 |
| Tubing Diameter: | 4 |
Product Downloads
| # | Document Type | Download |
|---|---|---|
| 1. | Installation Instructions |
|
Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.
Reference Information
| Reference Data (Provide these details to our support team) | |
|---|---|
| Brand Name/s | Afe, Afe Power |
| StreetFX SKU | afe49-03069-B |
| SFX Item ID | 4373212 |
| Accounting SKU | afe-49-03069-B |
| Manufacturer SKU | 49-03069-B |
| Manufacturer UPC | 802959492314 |
| Alternative References | AFE-49-03069-B |
Exhaust System, Atlas, Cat-back, Single, Steel, Aluminized, Side Exit, Ford, 2.7L, 3.5L, Kit
Engineered to perform in the most extreme environments, aFe Atlas exhaust systems are constructed from mandrel-bent aluminized steel tubing with high-quality band clamps and OE-style bayonet hangers. Where applicable, free-flowing aluminized steel mufflers are used to absorb high-pitch tones producing a powerful sound and unleashing more horsepower and torque out of your rig.
Atlas systems use factory mounting locations to provide a quick, hassle-free installation. Also included with some of these diesel exhausts are wrinkle-black powdercoated or polished 304 stainless steel tips with laser-cut stainless steel aFe badges.
aFe Atlas exhaust systems are a tremendous combination of performance, fit, and value. Features include:
• Leak-free 360 degree sealing
• Stable pipe location in high-vibration and high-heat conditions
• Bayonet tips hold hanger bushings in place for an OE-style fit
• Large diameter tubing provides maximum flow
• Smooth bends for low turbulence, increased horsepower and torque, and lower exhaust gas temperatures (EGTs)
• Slash-cut tips with intercooling vents reduce EGTs at the tailpipe (some applications)
• Available in a variety of configurations (varies by model)
• Select systems include dual outlets and exhaust tips
• Most do NOT fit cab and chassis models
• Some models require tailpipe hanger modifications
Notes:
• Many of these are "Race Only" products solely for competition use. Their use is limited to closed-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state, and federal laws.
• Select aFe Atlas exhaust systems may also require an aftermarket electronic module to work properly.
| Product Attributes | |
|---|---|
| UPC | 802959492314 |
| Brand | AFE Power |
| Tip Cut | Slant |
| Quantity | Sold as a kit. |
| Part Type | Exhaust Systems |
| Tip Shape | Round |
| Tip Finish | Black powdercoated |
| Exhaust Type | Single |
| Product Line | aFe Atlas Exhaust Systems |
| System Style | Cat-back |
| Tip Included | Yes |
| Tip Material | 409 stainless steel |
| Tip Quantity | 1 |
| Exit Location | Passenger side |
| Muffler Style | Perforated tube |
| System Finish | Aluminized |
| Inlet Quantity | 1 |
| Muffler Finish | Aluminized |
| Tip Edge Style | Rolled edge |
| System Material | Steel |
| Muffler Included | Yes |
| Muffler Material | Steel |
| Muffler Quantity | One |
| Hardware Included | Yes |
| Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
| Muffler Configuration | Single inlet/Single outlet |
| Tip Outlet Size (in.) | 6.00 |
| Tailpipe Diameter (in.) | 4.00 in. |
| Manufacturer's Part Number | 49-03069-B |
| Catalytic Converter(s) Included | No |
| Intermediate Pipe Diameter (in.) | 4.00 in. |
Compatibility
Loading compatibility information...
Keep shopping
More from Afe
Afe
aFe MagnumFORCE Intake Stage-2 Pro 5R 12-21 Jeep Grand Cherokee (WK2) V8-6.4L HEMI
afe54-13063R
A$743.16
Afe
aFe 22-23 Hyundai Kona N L4 2.0L(t) Takeda Momentum Cold Air Intake System w/ Pro 5R Filter
afe56-70058R
A$789.43
Afe
aFe Momentum GT Pro DRY S Intake System Red Edition 19-23 Dodge RAM 1500 V8-5.7L HEMI
afe50-70013DR
A$1,101.20