GA KT QD RPM/SP DB

Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 240 ohms empty to 33 ohms full (compatible with AutoMeter’s 3262 fuel level sender).

Part Type

Gauge Set

• 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
• 4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
• AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
• Highly polished chrome bezel
• Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" - 18THD)
• Sending unit adapters (1/4", 3/8”, and 1/2" NPT adapters), bulb and socket assemblies, red and green bulb covers, mounting hardware, and detailed instructions for installation.
• Speedometer features lit LCD odometer - capable of registering one-million miles with two resettable trip odometers
• Speedometer has a simple push button, 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
• Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.
• Tachometer is compatible with 0.5 - 6 pulse ignition signals (1-12 cylinder engines) with points, electronic, and most 12V high-performance racing ignitions.
• Traditional incandescent lighting illuminates around the perimeter of the dial

Note for Australian and European Markets

Unless otherwise stated, this product may be engineered for use in Left-Hand Drive vehicles. Steering components, pedals, shifters, linkages, wing mirrors, instrument clusters, panhard rods/traction bars, drag links, brake boosters, brake or clutch lines, accelerator cables, heater cores, some master cylinders and adjacent parts can vary between LHD and RHD configurations. In some models compenents such as windscreen wiper arms, motors and linkages could differ in their size and orientation. Items such as floor mats & dash mats may have differences in their structure around the front row (or padding in different locations). In many cases items are identical depending on the design of the vehicle and part, but may have differing mounts, lengths or bolt patterns. Carefully review the product images and details to ensure suitability for your vehicle, or contact StreetFX support if you are unsure. Returns are not accepted for special order products.

Important Note Regarding Oils, Additives, Aerosols & Liquids

This listing may contain a product with transport restrictions. Items containing oils, additives, aerosols, adhesive or other liquid/chemical-based products may be subject to shipping restrictions depending on their current warehouse location, carrier requirements, and applicable transport regulations.

Some liquid and aerosol products are restricted for air freight or certain road freight routes and may require alternative transport methods or dispatch from a specific warehouse. While the majority of these items ship without issue, these factors can occasionally affect available shipping options or delivery timeframes.

If you are working to a tight deadline, require urgent delivery, or are unsure whether a product can be shipped to your location, we recommend contacting the StreetFX team prior to placing your order so we can confirm availability and the most suitable freight option.

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Downloads

#	Document Type	Download
1.	Installation Instructions

Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.

Reference Information

Gauge Kit, Analog, Speedometer, Tachometer, Fuel Level, Water Temperature, Voltmeter, Oil Pressure, Kiit

AutoMeter Designer Black Series analog gauge kits provide you with a lot of data—in a variety of packages. They take rodders back to the original look of high performance instrumentation. The classic black dial face with bold numbering, clear domed lens, and chrome bezel make these gauges the choice of top show-car builders. Gauges are offered in single, dual, and quad data faces, as well as multi-gauge clusters. All lighting and mounting hardware is included for an easy installation.