Sway Bar End Links

This combination of components gives you a huge increase in strength over stock end links.BMR designed the ELK004 sway bar end link kit for street performance, autocross, and road race applications. BMRs heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links. End link deflection means reduced sway bar rate, leaving you with increased body roll and reduced handling ability. BMRs ELK004 will not deflect, giving you the full potential of the sway bar no matter how hard you drive. The adjustable links allow for on-car adjustability (front), giving you the ability to easily correct sway bar geometry and working angles on lowered Fifth Gens, as well as cars with adjustable sway bars. The ELK004 adjustable end links give you the ability to preload the sway bar to fine-tune your suspension setup for any track. Combine this with BMRs adjustable sway bars, and you can dial-in your car for the street or any track you may drive on. When performance is a must, rely on BMR's suspension!BMR's suspensions ELK004 front and rear sway bar End Link Kit is available in a durable black finish for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.!

Additional Information

BMR's heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links.

Part Type

Suspension Stabilizer Bar Link

Product Overview

The amount of force exerted on the sway bar end link is staggering?especially if youve upgraded to an aftermarket sway bar, like BMR Suspension's SB030 or SB037. The stock end links are weak and can bend or break. BMRs ELK004 front and rear End Link Kit allows you to push your 2010-2011 Camaro to the limit without fear of end link deflection. BMR manufactures the ELK004s out of CNC-machined billet aluminum and heavy-duty steel hex bar stock. The links feature ball joint-style tie rods, which are manufactured by Proforged, which offers huge advantages over other companies end links that use rod ends. Ball joints allow for more articulation than a rod end, which is what you want when you hit the track. This ensures long life and flawless operation, and they make less noise than rod ends. The ball joints attach to the sway bar with 12mm studs, while the ball joints attach to the end link tubes with -inch studs. This combination of components gives you a huge increase in strength over stock end links.

These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Details

Product Downloads

#	Document Type	Download
1.	Application Guide

Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.

Reference Information

Sway Bar End Links, Black Anodized, Chevy, Set of 4

The amount of force exerted on sway bar end links is staggering--especially if you've upgraded to an aftermarket sway bar. Stock end links are weak and can bend or break. BMR's end links allow you to push your car to the limit without fear of end link deflection.

BMR end links are manufactured, depending on the application, out of CNC-machined 6061-T6 billet aluminum, heavy-duty steel bar stock, with custom spacers and Grade 8 hardware. Where appropriate, they feature ball joint-style tie rods that offer huge advantages over end links that use rod ends. Ball joints allow for more articulation than rod ends; this ensures long life, flawless operation, and less noise (many are greasable). High-durometer polyurethane bushings are used wherever required. This combination of components provides a huge increase in strength over stock end links.

BMR sway bar end link kits feature durable finishes and are designed for street performance, autocross, and road race applications. Their reduced deflection uses more of the potential of the sway bar. Where applicable, adjustable links allow for on-car adjustability, allow for easy correction of sway bar geometry and working angles on lowered cars, with the ability to preload the sway bar to fine-tune the suspension setup for any track. Combine this with BMR's adjustable sway bars, and you can dial-in your car for the street or any track. When performance is a must, rely on BMR Suspension!