aFe 2023 Nissan Z V6-3.0L (tt) Takeda Stainless Steel Axle-B
SKU: afe49-36137-P
$966.56
or 4 payments of $241.64 with Info
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $460.59 fortnightly and receive your order now. More info
Borla Performance Industries has a grand heritage with Jeep exhaust Cat-backs and Headers. The performance is legendary and the durability just what these recreation vehicles need. If you are into getting out in the back-country, these new Jeeps are the ticket. If you live in country where the elements include severe weather, this could be your everyday driver. BORLA has introduced a pair of impressive exhaust rear sections for both the 4-door and 2-door 2007-08 Wranglers. The rear-sections connect to the factory mid-pipe. Choose from the split rear dual system (PN11755) or the single exit (PN11754). Both systems increase power, decrease weight, include handsome polished stainless steel BORLA tips and add durability to the adventurous Jeep Wrangler. Couple all this with the great BORLA sound of power, and you just want to jump in and go for a Jeep ride. BORLA, the original pioneers of high quality, austenitic stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy -- all with an easy bolt-on installation. And backed by an unsurpassed written million-mile warranty.
S-Type Axle-Back Exhaust System.
2010-2013 Chevrolet Camaro 3.6L V6 (Does NOT fit 2013 RS w/quad-tips a.k.a. Dual-Mode Exhaust) Automatic/ Manual Transmission Rear Wheel Drive 2-Door Coupe/Convertible.
Exhaust System Kit
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin.
With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems.
Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation.
Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
UPC | 808422117760 |
Brand | Borla |
Notes | Does not fit RS models with quad tip, Dual-Mode exhaust. |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla Touring Axle-Back Exhaust Systems |
System Style | Rear section |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 2 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 3.50 |
Tailpipe Diameter (in.) | 2.25 in. |
Summit Racing Part Number | BOR-11776 |
Manufacturer's Part Number | 11776 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Compatibility & Application Information | |
---|---|
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | 1LT |
Beginning Year | 2011 |
Ending Year | 2011 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | D |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | 1LT |
Beginning Year | 2012 |
Ending Year | 2012 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | 3 |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2010 |
Ending Year | 2010 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Borla 2010 Camaro 3.6L V6(except 2013RS) SS Exhaust (rear section only) | ||||
---|---|---|---|---|
Year | Make | Model | Submodel | Region |
2010 | Chevrolet | Camaro | LT | US |
2010 | Chevrolet | Camaro | LS | US |
2010 | Chevrolet | Camaro | SS | US |
2011 | Chevrolet | Camaro | SS | US |
2011 | Chevrolet | Camaro | LS | US |
2011 | Chevrolet | Camaro | LT | US |
2012 | Chevrolet | Camaro | SS | US |
2012 | Chevrolet | Camaro | LS | US |
2012 | Chevrolet | Camaro | ZL1 | US |
2012 | Chevrolet | Camaro | LT | US |
2013 | Chevrolet | Camaro | LS | US |
2013 | Chevrolet | Camaro | LT | US |
2013 | Chevrolet | Camaro | SS | US |
2013 | Chevrolet | Camaro | ZL1 | US |
Borla Performance Industries has a grand heritage with Jeep exhaust Cat-backs and Headers. The performance is legendary and the durability just what these recreation vehicles need. If you are into getting out in the back-country, these new Jeeps are the ticket. If you live in country where the elements include severe weather, this could be your everyday driver. BORLA has introduced a pair of impressive exhaust rear sections for both the 4-door and 2-door 2007-08 Wranglers. The rear-sections connect to the factory mid-pipe. Choose from the split rear dual system (PN11755) or the single exit (PN11754). Both systems increase power, decrease weight, include handsome polished stainless steel BORLA tips and add durability to the adventurous Jeep Wrangler. Couple all this with the great BORLA sound of power, and you just want to jump in and go for a Jeep ride. BORLA, the original pioneers of high quality, austenitic stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy -- all with an easy bolt-on installation. And backed by an unsurpassed written million-mile warranty.
S-Type Axle-Back Exhaust System.
2010-2013 Chevrolet Camaro 3.6L V6 (Does NOT fit 2013 RS w/quad-tips a.k.a. Dual-Mode Exhaust) Automatic/ Manual Transmission Rear Wheel Drive 2-Door Coupe/Convertible.
Exhaust System Kit
Installed behind the rear axle, Borla Touring axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s). Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin.
With a mellower tone than their S-Type axle-backs, Borla Touring axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. They use the latest muffler designs to eliminate sound frequencies that cause harshness, resonance, and drone. In addition to superior muffler design, improvements in sound and performance are accomplished by using mandrel-bent tubing and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems.
Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla Touring axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation.
Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla Touring axle-back exhaust systems.
UPC | 808422117760 |
Brand | Borla |
Notes | Does not fit RS models with quad tip, Dual-Mode exhaust. |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual |
Product Line | Borla Touring Axle-Back Exhaust Systems |
System Style | Rear section |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 2 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Single outlet |
Tip Outlet Size (in.) | 3.50 |
Tailpipe Diameter (in.) | 2.25 in. |
Summit Racing Part Number | BOR-11776 |
Manufacturer's Part Number | 11776 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Compatibility & Application Information | |
---|---|
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | 1LT |
Beginning Year | 2011 |
Ending Year | 2011 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | D |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | 1LT |
Beginning Year | 2012 |
Ending Year | 2012 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Engine VIN Code | 3 |
Universal | No |
Make | CHEVROLET |
Model | CAMARO |
Submodel | LS |
Beginning Year | 2010 |
Ending Year | 2010 |
Engine Type | V6 |
Liter | 3.6 |
CID | 217 |
CC | 3564 |
Engine Size | 3.6L/217 |
Engine Family | GM V6 |
Body Style | Coupe |
Transmission | Automatic |
Drivetrain | RWD |
Application Notes | S-Type Axle-Back Exhaust System; 2.25 in.; Incl. Connecting Pipes/Mufflers/Hardware/3.5 in. x 4.5 in. Single Round Rolled Angle-Cut Tip; Split Rear Exit; |
Borla 2010 Camaro 3.6L V6(except 2013RS) SS Exhaust (rear section only) | ||||
---|---|---|---|---|
Year | Make | Model | Submodel | Region |
2010 | Chevrolet | Camaro | LT | US |
2010 | Chevrolet | Camaro | LS | US |
2010 | Chevrolet | Camaro | SS | US |
2011 | Chevrolet | Camaro | SS | US |
2011 | Chevrolet | Camaro | LS | US |
2011 | Chevrolet | Camaro | LT | US |
2012 | Chevrolet | Camaro | SS | US |
2012 | Chevrolet | Camaro | LS | US |
2012 | Chevrolet | Camaro | ZL1 | US |
2012 | Chevrolet | Camaro | LT | US |
2013 | Chevrolet | Camaro | LS | US |
2013 | Chevrolet | Camaro | LT | US |
2013 | Chevrolet | Camaro | SS | US |
2013 | Chevrolet | Camaro | ZL1 | US |
aFe 2023 Nissan Z V6-3.0L (tt) Takeda Stainless Steel Axle-B
SKU: afe49-36137-P
$966.56
or 4 payments of $241.64 with Info
aFe Takeda 2-1/2in 304 SS Axle-Back Exhaust w/ Polished Tips
SKU: afe49-37014-P
$1,051.10
or 4 payments of $262.77 with Info
Borla 2017 Subaru Impreza AT/MT 2.0L AWD 5DR Hatch 2in SS S-
SKU: bor11944
$1,076.64
or 4 payments of $269.16 with Info
Remark 2022+ Subaru WRX (VB) 4in Axleback Exhaust w/ Stainle
SKU: remRO-TSVB-S4
$941.94
or 4 payments of $235.49 with Info