aFe 2023 Nissan Z V6-3.0L (tt) Takeda Stainless Steel Axle-B
SKU: afe49-36137-P
$1,007.28
or 4 payments of $251.82 with Info
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $812.04 fortnightly and receive your order now. More info
Borla Cat-Back And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere.
S-Type Axle-Back Exhaust System.
2016-2018 Chevrolet Camaro 3.6L V6 Automatic/ Manual Transmission. Rear Wheel Drive 2-Door with Dual Mode Exhaust (NPP).
Exhaust System Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin.
S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems.
Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation.
Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422219266 |
Brand | Borla |
Notes | Fits models without Dual Mode Exhaust. This system can be used on vehicles that came from the factory with singe tips, but the rear bumper valance must be changed to accommodate the dual tips. |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual in/Four out |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 4 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Dual outlet |
Tip Outlet Size (in.) | 4.00 |
Tailpipe Diameter (in.) | 2.50/2.75 in. |
Summit Racing Part Number | BOR-11926 |
Manufacturer's Part Number | 11926 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 2016 Chevy Camaro V6 AT/MT S-Type Rear Section Exhaust w/o Dual Mode Valves | ||||
---|---|---|---|---|
Year | Make | Model | Submodel | Region |
2016 | Chevrolet | Camaro | LT | US |
2016 | Chevrolet | Camaro | SS | US |
2017 | Chevrolet | Camaro | LT | US |
2017 | Chevrolet | Camaro | LS | US |
2017 | Chevrolet | Camaro | ZL1 | US |
2017 | Chevrolet | Camaro | SS | US |
2018 | Chevrolet | Camaro | SS | US |
2018 | Chevrolet | Camaro | LS | US |
2018 | Chevrolet | Camaro | ZL1 | US |
2018 | Chevrolet | Camaro | LT | US |
2019 | Chevrolet | Camaro | LS | US |
2019 | Chevrolet | Camaro | SS | US |
2019 | Chevrolet | Camaro | LT | US |
2019 | Chevrolet | Camaro | ZL1 | US |
2020 | Chevrolet | Camaro | ZL1 | US |
2020 | Chevrolet | Camaro | LT1 | US |
2020 | Chevrolet | Camaro | LT | US |
2020 | Chevrolet | Camaro | SS | US |
2020 | Chevrolet | Camaro | LS | US |
2021 | Chevrolet | Camaro | LT | US |
2021 | Chevrolet | Camaro | ZL1 | US |
2021 | Chevrolet | Camaro | LS | US |
2021 | Chevrolet | Camaro | LT1 | US |
2021 | Chevrolet | Camaro | SS | US |
2022 | Chevrolet | Camaro | LT1 | US |
2022 | Chevrolet | Camaro | LS | US |
2022 | Chevrolet | Camaro | ZL1 | US |
2022 | Chevrolet | Camaro | LT | US |
2022 | Chevrolet | Camaro | SS | US |
2023 | Chevrolet | Camaro | ZL1 | US |
2023 | Chevrolet | Camaro | LS | US |
2023 | Chevrolet | Camaro | LT | US |
2023 | Chevrolet | Camaro | SS | US |
2023 | Chevrolet | Camaro | LT1 | US |
Borla Cat-Back And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive Borla Sound of Power respected by motoring enthusiasts everywhere.
S-Type Axle-Back Exhaust System.
2016-2018 Chevrolet Camaro 3.6L V6 Automatic/ Manual Transmission. Rear Wheel Drive 2-Door with Dual Mode Exhaust (NPP).
Exhaust System Kit
Borla S-Type axle-back exhaust systems replace the factory rear muffler(s) and exhaust pipe(s) and are installed behind a vehicle's rear axle. Following the same exhaust path and secured using the original hangers and rubber isolators, Borla axle-back (or rear section) performance exhausts are less restrictive than factory exhaust systems and improve the sound level both inside and outside the cabin.
S-Type axle-back exhaust systems use engine-specific (not universal) mufflers that are designed, tested, and optimized specifically for a particular year, make, and model. Improvements in sound and performance are accomplished by using superior muffler designs, mandrel-bent tubing, and the application of proper engine-matched tubing diameters. Welded tips are standard on most systems.
Many vehicles have a factory service-point in the exhaust system (flange or slip-fit) located in the exhaust tubing behind the rear axle; so most Borla S-Type axle-back installations are completed in less than an hour with no cutting of the factory system. Vehicles that don't have a factory service-point require cutting, so Borla includes easy-to-follow instructions and hardware to complete the installation.
Borla pioneered the use of aircraft-grade 304 stainless steel tubing, a material with a higher content of carbon and nickel that won't rust or corrode, for the automotive exhaust aftermarket … including Borla S-Type axle-back exhaust systems.
UPC | 808422219266 |
Brand | Borla |
Notes | Fits models without Dual Mode Exhaust. This system can be used on vehicles that came from the factory with singe tips, but the rear bumper valance must be changed to accommodate the dual tips. |
Tip Cut | Slant |
Quantity | Sold as a kit. |
Part Type | Exhaust Systems |
Tip Shape | Round |
Tip Finish | Polished |
Exhaust Type | Dual in/Four out |
Product Line | Borla S-Type Axle-Back Exhaust Systems |
System Style | Rear axle-back |
Tip Included | Yes |
Tip Material | 304 stainless steel |
Tip Quantity | 4 |
Exit Location | Split rear |
Muffler Style | Turbo |
System Finish | Natural |
Inlet Quantity | 2 |
Muffler Finish | Natural |
Tip Edge Style | Rolled edge |
System Material | 304 stainless steel |
Muffler Included | Yes |
Muffler Material | 304 stainless steel |
Muffler Quantity | Two |
Hardware Included | Yes |
Special Attention | It is illegal to install parts or components that bypass, defeat, or render inoperative the manufacturers’ technology and design necessary to reduce vehicle emissions to meet state and federal Clean Air Act standards. |
Muffler Configuration | Single inlet/Dual outlet |
Tip Outlet Size (in.) | 4.00 |
Tailpipe Diameter (in.) | 2.50/2.75 in. |
Summit Racing Part Number | BOR-11926 |
Manufacturer's Part Number | 11926 |
Catalytic Converter(s) Included | No |
Intermediate Pipe Diameter (in.) | 2.25 in. |
Borla 2016 Chevy Camaro V6 AT/MT S-Type Rear Section Exhaust w/o Dual Mode Valves | ||||
---|---|---|---|---|
Year | Make | Model | Submodel | Region |
2016 | Chevrolet | Camaro | LT | US |
2016 | Chevrolet | Camaro | SS | US |
2017 | Chevrolet | Camaro | LT | US |
2017 | Chevrolet | Camaro | LS | US |
2017 | Chevrolet | Camaro | ZL1 | US |
2017 | Chevrolet | Camaro | SS | US |
2018 | Chevrolet | Camaro | SS | US |
2018 | Chevrolet | Camaro | LS | US |
2018 | Chevrolet | Camaro | ZL1 | US |
2018 | Chevrolet | Camaro | LT | US |
2019 | Chevrolet | Camaro | LS | US |
2019 | Chevrolet | Camaro | SS | US |
2019 | Chevrolet | Camaro | LT | US |
2019 | Chevrolet | Camaro | ZL1 | US |
2020 | Chevrolet | Camaro | ZL1 | US |
2020 | Chevrolet | Camaro | LT1 | US |
2020 | Chevrolet | Camaro | LT | US |
2020 | Chevrolet | Camaro | SS | US |
2020 | Chevrolet | Camaro | LS | US |
2021 | Chevrolet | Camaro | LT | US |
2021 | Chevrolet | Camaro | ZL1 | US |
2021 | Chevrolet | Camaro | LS | US |
2021 | Chevrolet | Camaro | LT1 | US |
2021 | Chevrolet | Camaro | SS | US |
2022 | Chevrolet | Camaro | LT1 | US |
2022 | Chevrolet | Camaro | LS | US |
2022 | Chevrolet | Camaro | ZL1 | US |
2022 | Chevrolet | Camaro | LT | US |
2022 | Chevrolet | Camaro | SS | US |
2023 | Chevrolet | Camaro | ZL1 | US |
2023 | Chevrolet | Camaro | LS | US |
2023 | Chevrolet | Camaro | LT | US |
2023 | Chevrolet | Camaro | SS | US |
2023 | Chevrolet | Camaro | LT1 | US |
aFe 2023 Nissan Z V6-3.0L (tt) Takeda Stainless Steel Axle-B
SKU: afe49-36137-P
$1,007.28
or 4 payments of $251.82 with Info
aFe Takeda 2-1/2in 304 SS Axle-Back Exhaust w/ Polished Tips
SKU: afe49-37014-P
$1,089.40
or 4 payments of $272.35 with Info
Remark 2022+ Subaru WRX (VB) 4in Axleback Exhaust w/ Stainle
SKU: remRO-TSVB-S4
$941.94
or 4 payments of $235.49 with Info
2.5in Axle-Back Rear Muffler Section - Stainless Steel (MX-5
SKU: ES-MX5-02-R
$600.00
or 4 payments of $150.00 with Info