COMP Cams Camshaft CS 260H-12 (350/T.P.
COMP Cams Camshaft CS 260H-12 (350/T.P.
A$694.04
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
CPU 212/212 HFTSBC
For Hydraulic Flat Tappet Lifters
Additional Information
For 350 tuned port injected engines with performance chip or programmer.
Application Summary
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Part Type
Engine Camshaft
Product Overview
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
| Additional Application Notes | |
|---|---|
| • In 1987, GM began using hydraulic roller camshafts in Chevrolet Small Block V8's. Before ordering this camshaft, verify that your engine has a flat tappet camshaft. If your engine features a roller camshaft, look at our "08-" camshafts or "07-" camshafts if equipped with an LT1/LT4. | |
| • Hyd. Flat Tappet; 1200-5200rpm; Adv. Dur. 260 Int./Exh.; Valve Lift .444 Int./Exh.; Lobe Angle 112 deg.; 50-State Legal 1987-Earlier Chevy C.A.R.B. E.O. D-279-3/5/6 | |
| • w/ Y Engine VIN; | |
| • w/ Y Engine VIN; Hyd. Flat Tappet; 1200-5200rpm; Adv. Dur. 260 Int./Exh.; Valve Lift .444 Int./Exh.; Lobe Angle 112 deg.; 50-State Legal 1987-Earlier Chevy C.A.R.B. E.O. D-279-3/5/6 | |
| • w/ E Engine VIN; | |
| • w/ E Engine VIN; Hyd. Flat Tappet; 1200-5200rpm; Adv. Dur. 260 Int./Exh.; Valve Lift .444 Int./Exh.; Lobe Angle 112 deg.; 50-State Legal 1987-Earlier Chevy C.A.R.B. E.O. D-279-3/5/6 | |
| • w/ T Engine VIN; | |
| • w/ T Engine VIN; Hyd. Flat Tappet; 1200-5200rpm; Adv. Dur. 260 Int./Exh.; Valve Lift .444 Int./Exh.; Lobe Angle 112 deg.; 50-State Legal 1987-Earlier Chevy C.A.R.B. E.O. D-279-3/5/6 | |
| • w/ K Engine VIN; | |
| • w/ K Engine VIN; Hyd. Flat Tappet; 1200-5200rpm; Adv. Dur. 260 Int./Exh.; Valve Lift .444 Int./Exh.; Lobe Angle 112 deg.; 50-State Legal 1987-Earlier Chevy C.A.R.B. E.O. D-279-3/5/6 | |
| • w/ J Engine VIN; | |
| • w/ J Engine VIN; Hyd. Flat Tappet; 1200-5200rpm; Adv. Dur. 260 Int./Exh.; Valve Lift .444 Int./Exh.; Lobe Angle 112 deg.; 50-State Legal 1987-Earlier Chevy C.A.R.B. E.O. D-279-3/5/6 | |
| • From 1985-1998 Chevrolet introduced the factory roller Small Block into GM cars and trucks. Verify whether or not your vehicle came with a factory roller camshaft. If your vehicle was equipped with a roller camshaft, look to our camshafts and kits that start with "08-". | |
| • w/ H Engine VIN; | |
| • w/ H Engine VIN; Hyd. Flat Tappet; 1200-5200rpm; Adv. Dur. 260 Int./Exh.; Valve Lift .444 Int./Exh.; Lobe Angle 112 deg.; 50-State Legal 1987-Earlier Chevy C.A.R.B. E.O. D-279-3/5/6 | |
| • w/ K Engine VIN; w/ J Engine VIN; | |
| • w/ K Engine VIN; w/ J Engine VIN; Hyd. Flat Tappet; 1200-5200rpm; Adv. Dur. 260 Int./Exh.; Valve Lift .444 Int./Exh.; Lobe Angle 112 deg.; 50-State Legal 1987-Earlier Chevy C.A.R.B. E.O. D-279-3/5/6 | |
| • In 1987, GM began using hydraulic roller camshafts in Chevrolet Small Block V8's. Before ordering this camshaft, verify that your engine has a flat tappet camshaft. If your engine features a roller camshaft, look at our "08-" camshafts or "07-" camshafts if equipped with an LT1/LT4. From 1985-1998 Chevrolet introduced the factory roller Small Block into GM cars and trucks. Verify whether or not your vehicle came with a factory roller camshaft. If your vehicle was equipped with a roller camshaft, look to our camshafts and kits that start with "08-". | |
| • w/ L Engine VIN; | |
| • w/ L Engine VIN; Hyd. Flat Tappet; 1200-5200rpm; Adv. Dur. 260 Int./Exh.; Valve Lift .444 Int./Exh.; Lobe Angle 112 deg.; 50-State Legal 1987-Earlier Chevy C.A.R.B. E.O. D-279-3/5/6 | |
| • w/ 7 Engine VIN; | |
| • w/ 7 Engine VIN; Hyd. Flat Tappet; 1200-5200rpm; Adv. Dur. 260 Int./Exh.; Valve Lift .444 Int./Exh.; Lobe Angle 112 deg.; 50-State Legal 1987-Earlier Chevy C.A.R.B. E.O. D-279-3/5/6 | |
These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.
Features
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Specifications
Product Details
| Advertised Exhaust Duration: | 260-9 |
| Advertised Intake Duration: | 260 |
| Amazon ASIN: | B000CEQDDM |
| Assembly Lubricant Included: | Yes |
| Basic Operating RPM Range: | 1,200-5,200 |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for On-Road Vehicles?: | No |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: | Yes, but must be a race/competition only vehicle. |
| Cam Type: | Hydraulic Flat Tappet |
| Camshaft Gear Attachment: | 3-Bolt |
| Camshaft Material: | Cast Iron |
| Camshaft Series: | Computer Controlled |
| Description: | Computer Controlled 212/212 Hydraulic Flat Cam for Chevrolet Small Block |
| Engine Family: | Chevrolet 262-400 c.i. 8 Cylinder (1958-1998) |
| Exhaust Duration @ .050 in.: | 212 |
| Exhaust Duration at .050 inch Lift: | 212 |
| Exhaust Duration: | 260-9 |
| Exhaust Valve Lift(in): | 0.444 |
| Exhaust Valve Lift: | 0.444 |
| Grind Number: | 260AH-12 |
| Intake Duration @ .050 in.: | 212 |
| Intake Duration at .050 Inch Lift: | 212 |
| Intake Duration: | 260-9 |
| Intake Valve Lift(in): | 0.444 |
| Intake Valve Lift: | 0.444 |
| Lifter Type: | Hydraulic Flat Tappet |
| Lifters Included: | No |
| Part Number: | cca12-314-4 |
| RPM Range: | 1000-7000 |
| Title: | Computer Controlled 212/212 Hydraulic Flat Cam for Chevrolet Small Block |
| Usage: | OEM |
| Valve Springs Required: | Yes |
Product Downloads
| # | Document Type | Download |
|---|---|---|
| 1. | Catalog |
|
Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.
Reference Information
| Reference Data (Provide these details to our support team) | |
|---|---|
| Brand Name/s | Comp Cams, Comp Cams (edelbrock) |
| StreetFX SKU | cca12-314-4 |
| SFX Item ID | 4118637 |
| Accounting SKU | cca-12-314-4 |
| Manufacturer SKU | 12-314-4 |
| Manufacturer UPC | 036584520207 |
| Alternative References | 12-314-4, CCA-12-314-4 |
Camshaft, Hydraulic Flat Tappet, Advertised Duration 260/260, Lift .444/.444, Chevy, Small Block, Each
COMP Cams computer-controlled camshafts are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these cams will fit your engine's needs.
| Product Attributes | |
|---|---|
| Brand | COMP Cams |
| Manufacturer's Part Number | 12-314-4 |
| Part Type | Camshafts |
| Product Line | COMP Cams Computer-Controlled Camshafts |
| UPC | 036584520207 |
| Cam Style | Hydraulic flat tappet |
| Camshaft Use | Stock Replacement |
| Basic Operating RPM Range | 1,200-5,200 |
| Intake Duration at 050 inch Lift | 212 |
| Exhaust Duration at 050 inch Lift | 212 |
| Duration at 050 inch Lift | 212 int./212 exh. |
| Advertised Intake Duration | 260 |
| Advertised Exhaust Duration | 260 |
| Advertised Duration | 260 int./260 exh. |
| Intake Valve Lift with Factory Rocker Arm Ratio | 0.444 in. |
| Exhaust Valve Lift with Factory Rocker Arm Ratio | 0.444 in. |
| Valve Lift with Factory Rocker Arm Ratio | 0.444 int./0.444 exh. |
| Remanufactured | No |
| Computer-Controlled Compatible | Yes |
| Grind Number | CS 260H-12 (350/T.P.I.) |
| Valve Springs Required | Yes |
| Quantity | Sold individually. |
| Notes | CARB EO is for 1987 and earlier applications only. |
| CARB EO Number(s) | D-279-6 |
Compatibility
Loading compatibility information...
Keep shopping
