COMP Cams Camshaft CS 270L322 S7
COMP Cams Camshaft CS 270L322 S7
A$810.33
Last Available from MFR.
LAST ONE AVAILABLE from the manufacturer's distribution centre. Once sold, this item may not be immediately available again. The dispatch timeframe shown is an estimate based on historical orders for this part and is dependent on the manufacturer releasing the final available unit.
We accept
Description
Exclusive Comp Cams flash sale discount at StreetFX!
Talk about timing! This is a limited offer while stocks last on various Comp Cams part numbers. There's never been a better time to buy your Comp Cams upgrades, so what are you waiting for?!
This item is currently on sale!
Same-day payment required to secure promotional price. Promotions may end early or be extended based on stock levels or other factors.
Lnchr 244/248 SFTSBC
SBC - 1955-57 models have an oiling groove in the rear journal. The listed part numbered cams will not fit these models, so if you require a Camshaft with the oiling groove, please call us at 1-800-999-0853 or contact us, and we will assist you with placing an order.
Additional Information
.322" lobe lift - Good for short track restricted with stock rocker and .480" or .500" lift rule.
Application Summary
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
Part Type
Engine Camshaft
Product Overview
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.
| Additional Application Notes | |
|---|---|
| • Not Legal For Sale Or Use On Pollution-Controlled Motor Vehicle Mech. Flat Tappet; 2800-6400rpm; Adv. Dur. 270 Int./274 Exh.; Valve Lift .483 Int/Exh.; Lobe Angle 107 deg.; | |
| • From 1985-1998 Chevrolet introduced the factory roller Small Block into GM cars and trucks. Verify whether or not your vehicle came with a factory roller camshaft. If your vehicle was equipped with a roller camshaft, look to our camshafts and kits that start with "08-". | |
These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.
Features
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Specifications
Product Details
| Advertised Exhaust Duration: | 274 |
| Advertised Intake Duration: | 270 |
| Amazon ASIN: | B000P5BA86 |
| Assembly Lubricant Included: | Yes |
| Basic Operating RPM Range: | 2,800-6,400 |
| C.A.R.B. Exempt for Federally Certified Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for Foreign Vehicles Manufactured Before 1967?: | Yes, but must meet tailpipe emission standards for year of vehicle. |
| C.A.R.B. Exempt for On-Road Vehicles?: | No |
| C.A.R.B. Exempt for Racing and Off-Road Only Vehicles?: | Yes, but must be a race/competition only vehicle. |
| Cam Type: | Solid Flat Tappet |
| Camshaft Gear Attachment: | 3-Bolt |
| Camshaft Material: | Cast Iron |
| Camshaft Series: | Launcher Series |
| Description: | Launcher Series 244/248 Solid Flat Cam for Chevrolet Small Block |
| Engine Family: | Chevrolet 262-400 c.i. 8 Cylinder (1958-1998) |
| Exhaust Duration @ .050 in.: | 248 |
| Exhaust Duration at .050 inch Lift: | 248 |
| Exhaust Duration: | 274 |
| Exhaust Valve Lift(in): | 0.483 |
| Exhaust Valve Lift: | 0.483 |
| Grind Number: | LC2705 |
| Intake Duration @ .050 in.: | 244 |
| Intake Duration at .050 Inch Lift: | 244 |
| Intake Duration: | 270 |
| Intake Valve Lift(in): | 0.483 |
| Intake Valve Lift: | 0.483 |
| Lifter Type: | Solid Flat Tappet |
| Lifters Included: | No |
| Part Number: | cca12-684-5 |
| RPM Range: | 2000-9000 |
| Title: | Launcher Series 244/248 Solid Flat Cam for Chevrolet Small Block |
| Usage: | Street/Strip |
| Valve Springs Required: | Yes |
Product Downloads
| # | Document Type | Download |
|---|---|---|
| 1. | Catalog |
|
Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.
Reference Information
| Reference Data (Provide these details to our support team) | |
|---|---|
| Brand Name/s | Comp Cams, Comp Cams (edelbrock) |
| StreetFX SKU | cca12-684-5 |
| SFX Item ID | 4118804 |
| Accounting SKU | cca-12-684-5 |
| Manufacturer SKU | 12-684-5 |
| Manufacturer UPC | 036584070511 |
| Alternative References | 12-684-5, CCA-12-684-5 |
Camshaft, Mechanical Flat Tappet, Advertised Duration 270/274, Lift .483/.483, Chevy, Small Block, Each
COMP Cams oval track camshafts are designed specifically for racing applications. They are available to complement a variety of engine configurations, track lengths, and conditions--simply order the model that fits the needs of your particular make and model. Before you start the next oval track race, install the winning camshaft edge from COMP Cams.
| Product Attributes | |
|---|---|
| Brand | COMP Cams |
| Manufacturer's Part Number | 12-684-5 |
| Part Type | Camshafts |
| Product Line | COMP Cams Oval Track Camshafts |
| UPC | 036584070511 |
| Cam Style | Solid flat tappet |
| Camshaft Use | Street/Strip |
| Basic Operating RPM Range | 2,800-6,400 |
| Intake Duration at 050 inch Lift | 244 |
| Exhaust Duration at 050 inch Lift | 248 |
| Duration at 050 inch Lift | 244 int./248 exh. |
| Advertised Intake Duration | 270 |
| Advertised Exhaust Duration | 274 |
| Advertised Duration | 270 int./274 exh. |
| Intake Valve Lift with Factory Rocker Arm Ratio | 0.483 in. |
| Exhaust Valve Lift with Factory Rocker Arm Ratio | 0.483 in. |
| Valve Lift with Factory Rocker Arm Ratio | 0.483 int./0.483 exh. |
| Intake Valve Lash | 0.014 in. |
| Exhaust Valve Lash | 0.014 in. |
| Remanufactured | No |
| Computer-Controlled Compatible | No |
| Grind Number | CS 270L322 S7 |
| Valve Springs Required | Yes |
| Quantity | Sold individually. |
Compatibility
Loading compatibility information...
Keep shopping
