Camshaft - OWM Traction Control - Mechanical Roller - 4/7 Swap - Lift 0.715 / 0.698 in - Duration 293 / 302 - 107 LSA - 4000 / 7800 RPM - Small Block Chevy - Each

OWMTC 264/269SRlrSBC

3/8-5/8 tracks with tight corners or heavy surface. 355-383 c.i., 12:1+, 4 BBL gas or alcohol. Requires good intake and heads. 4/7 firing order swap. The OWM T/C Series offers a Cam for just about every open wheel modified racer. With the newest lobe designs, a nice broad torque curve with great power and reduced tire spin, what open wheel modified racer wouldn't want to try out this legal traction control? COMP Cams has taken Camshaft Technology for open wheel modified racers into the next century with the introduction of the OWM T/C line. But don't take our word for it - pick one up and see for yourself. If rules allow a Solid Roller valve train set-up, these 4/7 firing order swap cams are the best choice for power and durability. With four specially designed Camshafts to fit most popular engine combinations and track conditions, every open wheel modified racer can benefit from this breakthrough Cam Technology. These cams deliver a gentle torque curve for ease in hooking the chassis up, yet will not run out of horsepower on the top end. Designed for Race Series Valve Springs, Endure-X Solid Roller Lifters and the latest valve train component Technology, the COMP Cams engineers have designed the ultimate Camshafts for local and Big money open wheel modified Competition. This Cam is absolutely not IMCA legal! SBC - 1955-57 models have an oiling groove in the rear journal. The listed part numbered cams will not fit these models, so if you require a Camshaft with the oiling groove, please call us and we will assist you with placing an order.

Additional Information

3/8-5/8 tracks w/ tight corners or heavy surface. 355-383c.i., 12:1+ compression, 4 BBL gas or alcohol. Requires good intake and heads.

Application Summary

Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.

Part Type

Engine Camshaft

Product Overview

Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer. GM gradually added roller camshafts to 305's and 350's from the mid 80's forward. Camaros/Firebirds/Corvettes received the roller cams early, but many trucks and SUV's had flat tappet cams until the mid 90's. Remove the intake or timing cover to confirm whether the block is a factory roller or flat tappet. Does not fit the LS1, LS2, LS3 or any LS-based 4.8, 5.3, 5.7, 6.0 and 6.2. 1955-1957 Chevrolet 265 engines require a groove on the 5th cam journal for oiling. Contact us for more information.

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Details

Product Downloads

#	Document Type	Download
1.	Catalog

Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.

Reference Information

Camshaft, Mechanical Roller Tappet, Advertised Duration 293/302, Lift .715/.698, Chevy, Small Block, Each

The industry-leading camshaft designers at COMP Cams set out to engineer a camshaft specifically for the requirements of open wheel modified racers. They had to take on the daunting task of building maximum horsepower, while still taking into consideration the tire restrictions, chassis technology, engine combinations, and common rule packages found in open wheel modified racing sanctioning bodies, such as IMCA. The Open Wheel Modified Traction Control Camshaft Series is comprised of 10 solid flat tappet and mechanical roller grinds for small block Chevys. These powerful camshafts are separated into four categories, each of which is optimized for open wheel modified racing. A combination of proven camshaft design technologies and the most innovative and aggressive lobe profiles in the industry has produced camshafts that deliver an extremely wide powerband, pulling hard off the corner and all the way down the straightaway. A further benefit of the broad horsepower curve of these cams is that they minimize tire spin, creating legal traction control. These innovative grinds have been extensively track-tested, and they have been proven to run faster than any camshaft that has ever been tested for this type of racing. COMP Cams OWM T/C Series offers a cam for just about every open wheel modified racer.