Camshaft Checking Fixture - Dial Indicator Stand - 1/2 in Head Studs - Aluminum - Black Anodized - Heads On - Each

COMP Cams Cam Fixture Valve W/Metric A

COMP Cams offers two styles of Cam checking fixtures--heads on and heads off--to suit your automotive needs. The cylinder heads' off-engine fixtures were designed to maintain proper geometry, while holding a dial indicator (not included) and a 5 in. extension (included) precisely over the lifters. These professional quality tools are much easier to use and more precise than using a magnetic indicator base when degreeing a cam. These multi-functional tools can also be used to check Rocker ratio, piston to valve clearance, and even crankshaft end play.

Additional Information

This COMP fixture is essential for any engine project where valvetrain measurements are required. Our tool screws into both 1/4"-20 and 6mm valve cover bolt holes and holds a dial indicator for measuring rocker travel.

Part Type

Dial Indicator Stand

Product Overview

*Camshaft Installation Handles*
These simple, yet effective handles provide good leverage and a non-slip grip when installing or removing a cam. These tools save time, pinched fingers and nicked cam bearings. COMP Cams carries two styles - one for Chevrolet specific engines and a universal kit.
• Universal handle includes five interchangeable adapters that fit most domestic V6 and V8 engines, including Chevrolet, Ford and Chrysler
• Chevrolet specific handle includes necessary hardware that stores inside hex-design handle
• Chevrolet specific handle fits Small and Big Blocks

*Camshaft Lobe Center Marking Tool Set*
With this tool the user marks the cam lobe with a type of marking fluid (e.g. dry erase marker or dychem), installs the cam, and then places the tool in the lifter bore. Next, the cam will be turned over to mark a line around the cam lobe. The cam is then removed, the distance from the edge of the lobe is measured and finally, shims are changed to achieve the correct lobe to lifter alignment.
• Three sizes for most common lifter bore diameters - .842", .875" and .904"
• Aluminum construction
• Has ¼"-20 thread for bolt in the top

*Cam Check ing Fixture*
(Cylinder Heads On Engine)
This tools screws into any 1/4"-20 or 6mm valve cover bolt hole and with the use of a dial indicator (not included), allows you to measure cam lift at the rocker arm, pushrod or lifter. This multi-functional tool can also be used to check rocker ratio, piston-to-valve clearance and even crankshaft end play.

*Cam Check ing Fixture*
(Cylinder Heads Off Engine)
This fixture was designed to maintain proper geometry while holding a dial indicator (not included) and 5" extension (included) precisely over the lifters. This professional quality tool is much easier to use and more precise than using a magnetic indicator base when degreeing a cam.

*Cam Checking Tools*
This innovative tool actually slides down into the lifter bore and rides on top of the camshaft in order to measure lobe lift and base circle runout. Each tool includes two followers: one for flat tappet cams and one for rollers. Two models are available, and each is double ended.
• Built-in o-ring holds tool firmly in the lifter bore while 1" travel dial indicator (not included) reads cam lift to .001"
• Two models available − one for GM (.842" dia.) and Ford (.875" dia.) and another for Chrysler (.904" dia.) and Top Fuel (1.0" dia.) lifter bores

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Details

Product Downloads

#	Document Type	Download
1.	Catalog

Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.

Reference Information

Cam Checking Fixture With Cylinder Head On, Each

COMP Cams offers two styles of cam checking fixtures--heads on and heads off--to suit your automotive needs. The cylinder heads' off-engine fixtures were designed to maintain proper geometry, while holding a dial indicator (not included) and a 5 in. extension (included) precisely over the lifters. These professional quality tools are much easier to use and more precise than using a magnetic indicator base when degreeing a cam. These multi-functional tools can also be used to check rocker ratio, piston to valve clearance, and even crankshaft end play.