Camburg 96-97 Ford Ranger 2WD/4WD Extended Front Brake Line Kit (4 Wheel ABS Single Port / 29in L)

These are the same brake lines we use in our performance and long-travel kits. They are extended in length, Teflon-lined, stainless steel braided and Kevlar reinforced with an additional protective covering. Our brake lines are made up of 5 layers for optimum strength and every single one is pressure tested. We know our brake lines are used in extreme conditions and are getting hit, pulled on, etc. off-road so we cut no corners. They come with everything you need to mount to the factory calipers. Some '96-97 Rangers require the older '89-96 versions if they do not have 4 wheel ABS. You can tell if the truck doesn't have 4-Wheel ABS if the driver side brake line at the frame has a bulkhead with two hard lines coming into it. If there is no bulkhead and just a single line, then the truck has 4 wheel ABS. These are 29" in length. These are pressure tested to 4,500 psi and meet Federal D.O.T. MVSS-106 standards. '89-96 dual port driver side line 96-97 single port driver side line (4 wheel ABS).

Additional Information

Camburg Ford Ranger 2wd/4wd '96-97 Front Brake Line Kit (4 Wheel ABS - single port) (29.00"L)

Part Type

Brake Hydraulic Line Kit

• 5-Layer Stainless Steel Braid
• Installs to OEM mounts and fittings
• Teflon-lined

Note for Australian and European Markets

Unless otherwise stated, this product may be engineered for use in Left-Hand Drive vehicles. Steering components, pedals, shifters, linkages, wing mirrors, instrument clusters, panhard rods/traction bars, drag links, brake boosters, brake or clutch lines, accelerator cables, heater cores, some master cylinders and adjacent parts can vary between LHD and RHD configurations. In some models compenents such as windscreen wiper arms, motors and linkages could differ in their size and orientation. Items such as floor mats & dash mats may have differences in their structure around the front row (or padding in different locations). In many cases items are identical depending on the design of the vehicle and part, but may have differing mounts, lengths or bolt patterns. Carefully review the product images and details to ensure suitability for your vehicle, or contact StreetFX support if you are unsure. Returns are not accepted for special order products.

Note in regards to wheels and tyres.

Unless otherwise stated, wheels and tyres are supplied individually. They are not typically listed as a full set since most vehicles run different widths and offsets front to rear. Please carefully check your PCD, width and offset (ET) when choosing wheels or wheel and tyre packages. If you need more information or clarification, contact StreetFX customer support prior to ordering.

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Reference Information