Supertech Nissan CA18DET Black Nitrided Intake Valve - Set o
SKU: sptNIVN-1001-8
$320.11
or 4 payments of $80.03 with Info
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $128.26 fortnightly and receive your order now. More info
With a .590" maximum lift, these Beehive Valve Springs were designed for Hydraulic or solid flat tappet cams as well as Hydraulic Roller cams. They allow big block engines to turn more RPM. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.
COMP Cams Beehive Valve Springs
Engine Valve Spring
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
UPC | 036584088646 |
Brand | COMP Cams |
Notes | O.D at top of spring is 1.095 in. and I.D. at top is 0.650 in. |
Quantity | Sold as a set of 16. |
Part Type | Valve Springs |
Product Line | COMP Cams Valve Springs |
Locks Included | No |
Retainers Included | No |
Valve Spring Style | Beehive |
Valve Springs Coated | No |
Spring Rate (lbs/in.) | 370 lbs./in. |
Coil Bind Height (in.) | 1.230 in. |
Damper Spring Included | No |
Maximum Valve Lift (in.) | 0.600 in. |
Summit Racing Part Number | CCA-26120-16 |
Valve Stem Seals Included | No |
Manufacturer's Part Number | 26120-16 |
Number of Springs Per Valve | Single |
Inside Diameter of Outer Spring (in.) | 0.650 in. |
Outside Diameter of Outer Spring (in.) | 1.445 in. |
Compatibility & Application Information | |
---|---|
Installed Height (in.) | 1.880 in. |
Seat Pressure at Installed Height (lbs.) | 155 lbs. |
Open Height (in.)(application) | 1.280 in. |
Open Pressure (lbs.) | 377 lbs. |
Application Notes | O.D at top of spring is 1.095 in. and I.D. at top is 0.650 in. |
COMP Cams Valve Springs 1.445in Beehive | ||||
---|---|---|---|---|
Year | Make | Model | Submodel | Region |
1959 | Chrysler | Imperial | Crown | |
1959 | Chrysler | Newport | Base | |
1959 | Chrysler | Imperial | LeBaron | |
1959 | Chrysler | New Yorker | Base | |
1959 | Chrysler | 300 | Base | |
1959 | Chrysler | Saratoga | Base | |
1959 | Chrysler | Windsor | Base | |
1959 | Chrysler | Imperial | Base | |
1959 | Dodge | Coronet | Base | |
1959 | Chrysler | Town & Country | Base | |
1960 | Plymouth | Suburban | Base | |
1960 | Chrysler | Imperial | Crown | |
1960 | Chrysler | Newport | Base | |
1960 | Dodge | Dart | Base | |
1960 | Plymouth | Fleet Special | Base | |
1960 | Chrysler | Imperial | LeBaron | |
1960 | Dodge | Dart | Phoenix | |
1960 | Plymouth | Fury | Base | |
1960 | Dodge | Polara | Base | |
1960 | Dodge | Dart | Pioneer | |
1960 | Chrysler | New Yorker | Base | |
1960 | Plymouth | Savoy | Deluxe | |
1960 | Plymouth | Suburban | Custom | |
1960 | Plymouth | Suburban | Sport | |
1960 | Plymouth | Belvedere | Base | |
1960 | Chrysler | 300 | Base | |
1960 | Plymouth | Savoy | Base | |
1960 | Chrysler | Saratoga | Base | |
1960 | Chrysler | Windsor | Base | |
1960 | Plymouth | Custom | Base | |
1960 | Chrysler | Imperial | Base | |
1960 | Dodge | Matador | Base | |
1960 | Plymouth | Sport Wagon | Base | |
1960 | Chrysler | Town & Country | Base | |
1961 | Chrysler | Town & Country | Base | |
1961 | Dodge | Dart | Pioneer | |
1961 | Plymouth | Suburban | Base | |
1961 | Chrysler | Imperial | Crown | |
1961 | Dodge | Dart | Base | |
1961 | Plymouth | Fleet Special | Base | |
1961 | Plymouth | Fury | Base | |
1961 | Dodge | Polara | Base | |
1961 | Chrysler | New Yorker | Base | |
1961 | Plymouth | Savoy | Deluxe | |
1961 | Plymouth | Suburban | Custom | |
1961 | Plymouth | Suburban | Sport | |
1961 | Plymouth | Belvedere | Base | |
1961 | Plymouth | Savoy | Base | |
1961 | Dodge | Lancer | Base | |
1961 | Chrysler | 300 | Base | |
Note: Over 50 fitments returned for this product, this table is trimmed to only display the first 50. |
With a .590" maximum lift, these Beehive Valve Springs were designed for Hydraulic or solid flat tappet cams as well as Hydraulic Roller cams. They allow big block engines to turn more RPM. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.
COMP Cams Beehive Valve Springs
Engine Valve Spring
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
UPC | 036584088646 |
Brand | COMP Cams |
Notes | O.D at top of spring is 1.095 in. and I.D. at top is 0.650 in. |
Quantity | Sold as a set of 16. |
Part Type | Valve Springs |
Product Line | COMP Cams Valve Springs |
Locks Included | No |
Retainers Included | No |
Valve Spring Style | Beehive |
Valve Springs Coated | No |
Spring Rate (lbs/in.) | 370 lbs./in. |
Coil Bind Height (in.) | 1.230 in. |
Damper Spring Included | No |
Maximum Valve Lift (in.) | 0.600 in. |
Summit Racing Part Number | CCA-26120-16 |
Valve Stem Seals Included | No |
Manufacturer's Part Number | 26120-16 |
Number of Springs Per Valve | Single |
Inside Diameter of Outer Spring (in.) | 0.650 in. |
Outside Diameter of Outer Spring (in.) | 1.445 in. |
Compatibility & Application Information | |
---|---|
Installed Height (in.) | 1.880 in. |
Seat Pressure at Installed Height (lbs.) | 155 lbs. |
Open Height (in.)(application) | 1.280 in. |
Open Pressure (lbs.) | 377 lbs. |
Application Notes | O.D at top of spring is 1.095 in. and I.D. at top is 0.650 in. |
COMP Cams Valve Springs 1.445in Beehive | ||||
---|---|---|---|---|
Year | Make | Model | Submodel | Region |
1959 | Chrysler | Imperial | Crown | |
1959 | Chrysler | Newport | Base | |
1959 | Chrysler | Imperial | LeBaron | |
1959 | Chrysler | New Yorker | Base | |
1959 | Chrysler | 300 | Base | |
1959 | Chrysler | Saratoga | Base | |
1959 | Chrysler | Windsor | Base | |
1959 | Chrysler | Imperial | Base | |
1959 | Dodge | Coronet | Base | |
1959 | Chrysler | Town & Country | Base | |
1960 | Plymouth | Suburban | Base | |
1960 | Chrysler | Imperial | Crown | |
1960 | Chrysler | Newport | Base | |
1960 | Dodge | Dart | Base | |
1960 | Plymouth | Fleet Special | Base | |
1960 | Chrysler | Imperial | LeBaron | |
1960 | Dodge | Dart | Phoenix | |
1960 | Plymouth | Fury | Base | |
1960 | Dodge | Polara | Base | |
1960 | Dodge | Dart | Pioneer | |
1960 | Chrysler | New Yorker | Base | |
1960 | Plymouth | Savoy | Deluxe | |
1960 | Plymouth | Suburban | Custom | |
1960 | Plymouth | Suburban | Sport | |
1960 | Plymouth | Belvedere | Base | |
1960 | Chrysler | 300 | Base | |
1960 | Plymouth | Savoy | Base | |
1960 | Chrysler | Saratoga | Base | |
1960 | Chrysler | Windsor | Base | |
1960 | Plymouth | Custom | Base | |
1960 | Chrysler | Imperial | Base | |
1960 | Dodge | Matador | Base | |
1960 | Plymouth | Sport Wagon | Base | |
1960 | Chrysler | Town & Country | Base | |
1961 | Chrysler | Town & Country | Base | |
1961 | Dodge | Dart | Pioneer | |
1961 | Plymouth | Suburban | Base | |
1961 | Chrysler | Imperial | Crown | |
1961 | Dodge | Dart | Base | |
1961 | Plymouth | Fleet Special | Base | |
1961 | Plymouth | Fury | Base | |
1961 | Dodge | Polara | Base | |
1961 | Chrysler | New Yorker | Base | |
1961 | Plymouth | Savoy | Deluxe | |
1961 | Plymouth | Suburban | Custom | |
1961 | Plymouth | Suburban | Sport | |
1961 | Plymouth | Belvedere | Base | |
1961 | Plymouth | Savoy | Base | |
1961 | Dodge | Lancer | Base | |
1961 | Chrysler | 300 | Base | |
Note: Over 50 fitments returned for this product, this table is trimmed to only display the first 50. |
Supertech Nissan CA18DET Black Nitrided Intake Valve - Set o
SKU: sptNIVN-1001-8
$320.11
or 4 payments of $80.03 with Info
Supertech VW/Audi 1.8T 20V 4cyl Dual Valve Spring Kit
SKU: sptSPRK-AUDI18T
$961.11
or 4 payments of $240.28 with Info
Aeromotive In-Line Full Flow Check Valve (-10 AN Flare) - Bl
SKU: aer15133
$240.33
or 4 payments of $60.08 with Info