Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $42.09 fortnightly and receive your order now. More info
- We Accept
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $42.09 fortnightly and receive your order now. More info
Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic. Can be applied directly to heat sources like exhaust manifolds and pipes. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750° F of direct continuous heat. The adhesive side holds past 450° F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.
Form-A-Shield™;
DEI Form-A-Shield heat barriers solve the problem of needing a direct-contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400 degree F, these sheets can cover exhaust headers, manifolds, turbo housings, and downpipes, dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled-aluminum that's bonded to a high-temp rated basalt thermal barrier material, Form-A-Shield may be applied directly to hot surfaces, helping to lower underhood temperatures while keeping more heat in the exhaust system. Order the size and thickness needed for your application.
Key features and benefits:
Note: DEI adhesive spray can be used with Form-A-Shield on "non-hot" areas only, to serve as a heat barrier/reflector.
Brand | Design Engineering DEI |
Manufacturer's Part Number | 50519 |
Part Type | Heat Barrier and Sound Deadening Mats |
Product Line | DEI Form-A-Shield Heat Barriers |
Summit Racing Part Number | DEI-050519 |
UPC | 607078505194 |
Mat Use | Heat barrier |
Length (in.) | 12.000 in. |
Width (in.) | 21.000 in. |
Thickness (in.) | 0.260 |
Installation | Straps |
Maximum Ambient Temperature (degrees F) | 1,400 degrees F |
Quantity | Sold individually. |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
Use as a barrier to reflect and insulate from any heat source. Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic. Can be applied directly to heat sources like exhaust manifolds and pipes. Constructed with an embossed 10 mil aluminum face bonded to 1/8" composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750° F of direct continuous heat. The adhesive side holds past 450° F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16" thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas. With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.
Form-A-Shield™;
DEI Form-A-Shield heat barriers solve the problem of needing a direct-contact, extreme heat barrier. Capable of withstanding direct heat of up to 1400 degree F, these sheets can cover exhaust headers, manifolds, turbo housings, and downpipes, dramatically reducing radiant exhaust temperatures. Formed from 10 mil dimpled-aluminum that's bonded to a high-temp rated basalt thermal barrier material, Form-A-Shield may be applied directly to hot surfaces, helping to lower underhood temperatures while keeping more heat in the exhaust system. Order the size and thickness needed for your application.
Key features and benefits:
Note: DEI adhesive spray can be used with Form-A-Shield on "non-hot" areas only, to serve as a heat barrier/reflector.
Brand | Design Engineering DEI |
Manufacturer's Part Number | 50519 |
Part Type | Heat Barrier and Sound Deadening Mats |
Product Line | DEI Form-A-Shield Heat Barriers |
Summit Racing Part Number | DEI-050519 |
UPC | 607078505194 |
Mat Use | Heat barrier |
Length (in.) | 12.000 in. |
Width (in.) | 21.000 in. |
Thickness (in.) | 0.260 |
Installation | Straps |
Maximum Ambient Temperature (degrees F) | 1,400 degrees F |
Quantity | Sold individually. |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
DEI Floor and Tunnel Shield II 21in x 48in - 7.0 sq ft
SKU: dei50552
$288.90
or 4 payments of $72.22 with Info
Reflective Heat Tape - 2in x 30ft. Gold
SKU: HEA-Gwrap-30
$53.96
$59.95
or 4 payments of $13.49 with Info