SKU: gbe42710
Banks Power 94-98 Dodge 5.9L Non-EGR Twin-Ram Manifold System
LOW STOCK! Est Ship 3-5 days.
$1,396.41
$1,670.22
Intake Manifold - Performer EPS - Square Bore - Dual Plane - Aluminum - Natural - Vortec - Small Block Chevy - Each
MANIFOLD
Edelbrock part #2716 Performer EPS Vortec intake manifold is now available for small-block Chevys with Vortec or Edelbrock E-Tec cylinder heads, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. The runner design is "tuned" for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains averaging 5+ ft-lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Will not fit under stock Corvette hood.
MANIFOLD; 1996-02 SB CHEVY 5.0L-5.7L; EPS; VORTEC
Chevrolet:Small-Block Gen I Vortec:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Engine Intake Manifold
| Basic Operating RPM Range: | Idle-5500 |
| CNC Ported: | No |
| Center Maximum Height: | 3.200 |
| Cylinder Head Type: | GM Vortec/Edelbrock E-TEC |
| Description: | Performer EPS Vortec Intake Manifold |
| EGR Port: | No |
| Emission: | Without EGR |
| Engine Make/Size: | Chevy Small Block (262-400) |
| Finish: | Satin |
| Flange Type: | 4150 |
| Front Maximum Height: | 2.500 |
| Gasket Or Seal Included: | No |
| Grade Type: | Performance |
| Material: | Aluminum |
| Number of Carbs: | Two |
| Part Number: | ede2716 |
| RGL: | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| RPM Range: | Idle -5500 |
| Rear Maximum Height: | 3.900 |
| Series: | Performer |
| Single Or Dual Plane Type: | Dual |
| Usage: | Street/Hi-Performance |
| Vehicle Model: | Chevrolet |
Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.
Unless otherwise stated, this product may be engineered for use in Left-Hand Drive vehicles. Steering components, pedals, shifters, instrument clusters, brake boosters and some master cylinders and adjacent parts can vary between LHD and RHD configurations, but in many cases they are identical depending on the design of the vehicle and part, but may have differing mounts or bolt patterns. Carefully review the product images and details to ensure suitability for your vehicle, or contact StreetFX support if you are unsure. Returns are not accepted for special order products.
(keyword: manifold)Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
| Reference Data (Provide these details to our support team) | |
|---|---|
| Brand Name/s | Edelbrock |
| StreetFX SKU | ede2716 |
| SFX Item ID | 4236576 |
| Accounting SKU | ede-2716 |
| Manufacturer SKU | 2716 |
| Manufacturer UPC | 85347027163 |
| Alternative References | EDB2716, EDL-2716 |
Intake Manifold, Performer EPS Vortec, Dual Plane, Aluminum, Satin, Chevy, Vortec, E-Tec, Each
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
| Product Attributes | |
|---|---|
| Brand | Edelbrock |
| Manufacturer's Part Number | 2716 |
| Part Type | Intake Manifolds, Carbureted |
| Product Line | Edelbrock Performer EPS Intake Manifolds |
| UPC | 085347027163 |
| Intake Section Included | Complete |
| Engine Block Deck Height | Standard deck |
| Carburetor Quantity | One |
| Intake Style | Dual plane |
| Basic Operating RPM Range | Idle-5,500 |
| Intake Manifold Height | 4.570 in. |
| Intake Color | Natural |
| Intake Material | Aluminum |
| EGR | No |
| Quantity | Sold individually. |
| Notes | Will only fit Vortec or Edelbrock E-tec cylinder heads. 0.120 in. thick intake gaskets are recommended; please see the Recommended Parts Tab. |
No specific fitment data available for this part. For clarification, please contact us.
| Application Data | |
|---|---|
| Make | CHEVROLET |
| Beginning Year | 1996 |
| Ending Year | 2002 |
| Engine Type | V8 |
| Engine Family | Chevy small block Gen I |
| Engine Size | 5.0L/305 |
| Carburetor Mounting | 4-barrel square bore |
| Cylinder Head Type | Edelbrock E-tec |
| Make | CHEVROLET |
| Beginning Year | 1996 |
| Ending Year | 2002 |
| Engine Type | V8 |
| Engine Family | Chevy small block Gen I |
| Engine Size | 5.0L/305 |
| Carburetor Mounting | 4-barrel square bore |
| Cylinder Head Type | Vortec |
| Make | CHEVROLET |
| Beginning Year | 1996 |
| Ending Year | 2002 |
| Engine Type | V8 |
| Engine Family | Chevy small block Gen I |
| Engine Size | 5.7L/350 |
| Carburetor Mounting | 4-barrel square bore |
| Cylinder Head Type | Edelbrock E-tec |
This may not be an exhaustive list of compatible vehicles. Please reach out to one of our representatives if you are unsure or do not see your vehicle here.
Intake Manifold - Performer EPS - Square Bore - Dual Plane - Aluminum - Natural - Vortec - Small Block Chevy - Each
MANIFOLD
Edelbrock part #2716 Performer EPS Vortec intake manifold is now available for small-block Chevys with Vortec or Edelbrock E-Tec cylinder heads, the Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. The runner design is "tuned" for peak torque around 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains averaging 5+ ft-lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Will not fit under stock Corvette hood.
MANIFOLD; 1996-02 SB CHEVY 5.0L-5.7L; EPS; VORTEC
Chevrolet:Small-Block Gen I Vortec:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Engine Intake Manifold
| Basic Operating RPM Range: | Idle-5500 |
| CNC Ported: | No |
| Center Maximum Height: | 3.200 |
| Cylinder Head Type: | GM Vortec/Edelbrock E-TEC |
| Description: | Performer EPS Vortec Intake Manifold |
| EGR Port: | No |
| Emission: | Without EGR |
| Engine Make/Size: | Chevy Small Block (262-400) |
| Finish: | Satin |
| Flange Type: | 4150 |
| Front Maximum Height: | 2.500 |
| Gasket Or Seal Included: | No |
| Grade Type: | Performance |
| Material: | Aluminum |
| Number of Carbs: | Two |
| Part Number: | ede2716 |
| RGL: | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| RPM Range: | Idle -5500 |
| Rear Maximum Height: | 3.900 |
| Series: | Performer |
| Single Or Dual Plane Type: | Dual |
| Usage: | Street/Hi-Performance |
| Vehicle Model: | Chevrolet |
Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.
Unless otherwise stated, this product may be engineered for use in Left-Hand Drive vehicles. Steering components, pedals, shifters, instrument clusters, brake boosters and some master cylinders and adjacent parts can vary between LHD and RHD configurations, but in many cases they are identical depending on the design of the vehicle and part, but may have differing mounts or bolt patterns. Carefully review the product images and details to ensure suitability for your vehicle, or contact StreetFX support if you are unsure. Returns are not accepted for special order products.
(keyword: manifold)Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
| Reference Data (Provide these details to our support team) | |
|---|---|
| Brand Name/s | Edelbrock |
| StreetFX SKU | ede2716 |
| SFX Item ID | 4236576 |
| Accounting SKU | ede-2716 |
| Manufacturer SKU | 2716 |
| Manufacturer UPC | 85347027163 |
| Alternative References | EDB2716, EDL-2716 |
Intake Manifold, Performer EPS Vortec, Dual Plane, Aluminum, Satin, Chevy, Vortec, E-Tec, Each
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
| Product Attributes | |
|---|---|
| Brand | Edelbrock |
| Manufacturer's Part Number | 2716 |
| Part Type | Intake Manifolds, Carbureted |
| Product Line | Edelbrock Performer EPS Intake Manifolds |
| UPC | 085347027163 |
| Intake Section Included | Complete |
| Engine Block Deck Height | Standard deck |
| Carburetor Quantity | One |
| Intake Style | Dual plane |
| Basic Operating RPM Range | Idle-5,500 |
| Intake Manifold Height | 4.570 in. |
| Intake Color | Natural |
| Intake Material | Aluminum |
| EGR | No |
| Quantity | Sold individually. |
| Notes | Will only fit Vortec or Edelbrock E-tec cylinder heads. 0.120 in. thick intake gaskets are recommended; please see the Recommended Parts Tab. |
No specific fitment data available for this part. For clarification, please contact us.
| Application Data | |
|---|---|
| Make | CHEVROLET |
| Beginning Year | 1996 |
| Ending Year | 2002 |
| Engine Type | V8 |
| Engine Family | Chevy small block Gen I |
| Engine Size | 5.0L/305 |
| Carburetor Mounting | 4-barrel square bore |
| Cylinder Head Type | Edelbrock E-tec |
| Make | CHEVROLET |
| Beginning Year | 1996 |
| Ending Year | 2002 |
| Engine Type | V8 |
| Engine Family | Chevy small block Gen I |
| Engine Size | 5.0L/305 |
| Carburetor Mounting | 4-barrel square bore |
| Cylinder Head Type | Vortec |
| Make | CHEVROLET |
| Beginning Year | 1996 |
| Ending Year | 2002 |
| Engine Type | V8 |
| Engine Family | Chevy small block Gen I |
| Engine Size | 5.7L/350 |
| Carburetor Mounting | 4-barrel square bore |
| Cylinder Head Type | Edelbrock E-tec |
This may not be an exhaustive list of compatible vehicles. Please reach out to one of our representatives if you are unsure or do not see your vehicle here.
SKU: gbe42710
Banks Power 94-98 Dodge 5.9L Non-EGR Twin-Ram Manifold System
LOW STOCK! Est Ship 3-5 days.
$1,396.41
$1,670.22
SKU: vmpVMP-INA015
VMP Performance 18+ Intake Mani Gen 2 Coyote P&P CMCV Harnesses for 15-17 Mustang GT (tune required)
Back-Order. Contact for ETA.
$175.56
$234.36