MANIFOLD-RACE

Edelbrock part #28009 Big Victor 2 CNC intake manifold is designed for large cubic-inch or high rpm drag racing big-blocks. The Big Victor 2 is a spread-port design and has been CNC port matched for a proper fit right-out of-the-box, when used with the Edelbrock Big Victor, Brodix, Dart or Pro-Filer Raptor cylinder heads. This manifold has the same features as the standard as-cast Edelbrock Big Victor 2 Spread- Port intakes. This intake manifold is equipped with a 4500 Series flange and will accept 2.25" throttle body butterflies without a spacer or modification.

Additional Information

MANIFOLD; BBC BIG VICTOR II 4500 FLANGE CNC PORT MATCH FOR EDELBROCK BIG VICTOR 618268/618368 HEADS TALL DECK 10.2in.

Application Summary

Chevrolet:Big-Block Race

Part Type

Engine Intake Manifold

• Use Appropriate 4500-Series Carburetor

Note for Australian and European Markets

Unless otherwise stated, this product may be engineered for use in Left-Hand Drive vehicles. Steering components, pedals, shifters, linkages, wing mirrors, instrument clusters, panhard rods/traction bars, drag links, brake boosters, brake or clutch lines, accelerator cables, heater cores, some master cylinders and adjacent parts can vary between LHD and RHD configurations. In some models compenents such as windscreen wiper arms, motors and linkages could differ in their size and orientation. Items such as floor mats & dash mats may have differences in their structure around the front row (or padding in different locations). In many cases items are identical depending on the design of the vehicle and part, but may have differing mounts, lengths or bolt patterns. Carefully review the product images and details to ensure suitability for your vehicle, or contact StreetFX support if you are unsure. Returns are not accepted for special order products.

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Details

Reference Information

Intake Manifold, Big Victor 2 Spread-Port, CNC Port Matched, Single Plane, Aluminum, Natural, Chevy, Big Block, Each

Are you in the market for better consistency and top-end horsepower? Edelbrock Big Victor 2 Spread-Port intake manifolds are designed for large cubic inch/high-rpm big blocks—and are available for short- and tall-deck applications. They have an extended runner design, carb pad, and plenum in order to meet the stringent requirements for performance in large displacement race engines. Designed to perform with minimum modifications, the intake manifolds can still be ported as needed, and for best results port matching is required. All applications are equipped with a 4500 Series flange and will accept 2.25 in. throttle body butterflies without a spacer or modification.