Edelbrock V/S Perf RPM and Torker Chev V8 262-400

SKU: EDE5703

Valve Springs

EDE Valve Springs...

Edelbrock

Edelbrock V/S Perf RPM and Torker Chev V8 262-400

SKU: EDE5703

Valve Springs

EDE Valve Springs...

Available from MFR. In stock at 2 locations (more than 10 available)

We accept

Description

Valve Spring - Sure Seat - Single Spring / Damper - 357 lb/in Spring Rate - 1.160 in Coil Bind - 1.262 in OD - Small Block Chevy - Set of 16

VALVE SPRINGS

The Edelbrock #5703 Sure Seat Valve Spring for S/B Chevy O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance'springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.

Additional Information

V/S V8 262-400

Application Summary

Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

Part Type

Engine Valve Spring Kit

Additional Application Notes
• High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast Iron OE Cyl. Heads
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. High Perf. Street For Use w/Cast Iron OE Cyl. Heads Coil Bind 1.160in.
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High Perf. Street For Use w/Cast Iron OE Cyl. Heads Coil Bind 1.160in.
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in.
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast Iron OE Cyl. Heads
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. High Perf. Street For Use w/Cast Iron OE Cyl. Heads
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; O
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265"; ID 7/8" High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast Iron OE Cyl. Heads
• High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; O
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.
• High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast Iron OE Cyl. He
• Seat Press.
• High Performance Street; Non-Rotator; Seat P
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Install
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.
• High Perf. Str
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. High Perf.
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High Perf. Street For Use w/Cast Iron OE Cyl. Heads
• High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. High Perf. Street;
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in.
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in.
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. High Perf. Street; Non-Rotator
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs.
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. High Perf. Street For Use w/Cast Iron OE Cyl. Heads Coil
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. High Perf. Street; Non-R
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. High Perf. Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Pres
• Seat Press. 110lbs. Open Press. 285lb
• High Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID

These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.

Data: v2 - Desc: v4.2 - Upd: 2026-11-08 00:25:22

Data: v4.2 - Upd: 2026-11-10 00:36:05

Features

Use with Original Equipment Heads Only

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Specifications

Product Details

Camshaft Type:	Hydraulic Flat Tappet
Coil Bind Height (in.):	OEM
Coil Bind Height:	1.160
Damper Spring Included:	Yes
Description:	Sure Seat Valve Spring
Inside Diameter:	0.878
Installed Height (in.):	1.7
Installed Height:	1.700
Installed Pressure (lbs.):	110
Installed Pressure:	110
Material:	Chromium Silicon
Open Height (in.):	1.7
Open Height:	1.700 in.
Open Pressure (lbs.):	285
Open Pressure:	285
Outside Diameter:	1.262
Part Number:	ede5703
Position:	Exhaust or Intake
Quantity:	Set of 16
Spring Open Height:	1.210
Spring Type:	Cylindrical
Springs Per Valve:	Single
Tubing Length:	285

Reference Information

Reference Data (Provide these details to our support team)
Brand Name/s	Edelbrock
StreetFX SKU	ede5703
SFX Item ID	4237298
Accounting SKU	ede-5703
Manufacturer SKU	5703
Manufacturer UPC	85347057030
Alternative References	5703, EDB5703, EDL-5703

Valve Springs, Sure Seat, Single, 1.265 in. Outside Diameter, 1.700 in. Installed Height, Set of 16

Upgrading your camshaft? Get maximum performance with matching valve springs. Edelbrock's Sure Seat valve springs are made of the highest quality spring wire and are precision-wound to exact specifications. They are designed for use on OEM heads when used in conjunction with their Performer-Plus, Performer RPM, and Torker-Plus camshafts. They'll work with the stock rotators (if applicable) and fit the spring pockets perfectly.

Product Attributes
Brand	Edelbrock
Manufacturer's Part Number	5703
Part Type	Valve Springs
Product Line	Edelbrock Sure Seat Valve Springs
UPC	085347057030
Valve Spring Style	Standard
Number of Springs Per Valve	Single
Retainers Included	No
Outside Diameter of Outer Spring (in.)	1.265 in.
Coil Bind Height (in.)	1.160 in.
Damper Spring Included	No
Spring Rate (lbs./in.)	357 lbs./in.
Inside Diameter of Outer Spring (in.)	0.880 in.
Inside Diameter of Inner Spring (in.)	0.880 in.
Locks Included	No
Valve Stem Seals Included	No
Valve Springs Coated	No
Remanufactured	No
Quantity	Sold as a set of 16.

Manufacturer Attributes
Outside Diameter	1.262
Damper Spring Included	Yes
Installed Height	1.700
Springs Per Valve	Single
Inside Diameter	0.878
Installed Pressure	110
Open Pressure	285
Material	Chromium Silicon
Camshaft Type	Hydraulic Flat Tappet
Spring Open Height	1.210
Spring Type	Cylindrical
Quantity	Set of 16
Coil Bind Height	1.160
Product Class	Engine Valve Spring Kit
Construction/Type	The Edelbrock #5703 Sure Seat Valve Spring for S/B Chevy O.E Cast iron cylinder heads are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts.
Vehicle Designations	Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Vehicle Brief	Edelbrock Sure Seat Valve Springs
Market Description	The Edelbrock #5703 Sure Seat Valve Spring for S/B Chevy O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.