Edelbrock V/S Perf RPM and Torker Chrys 383-440

SKU: EDE5792

Valve Springs

EDE Valve Springs...

Edelbrock

Edelbrock V/S Perf RPM and Torker Chrys 383-440

SKU: EDE5792

Valve Springs

EDE Valve Springs...

IN STOCK! Est Ship 4-7 days. In stock at 2 locations (7 available)

We accept

Description

Valve Spring - Sure Seat - Single Spring / Damper - 360 lb/in Spring Rate - 1.160 in Coil Bind - 1.550 in OD - Mopar B / RB-Series - Set of 16

VALVE SPRINGS

The Edelbrock #5792 Sure Seat Valve Spring for Chrysler 383-400-413-440 V8 1969-79 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance'springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.

Additional Information

V/S V8 383-440

Application Summary

Chrysler:Big-Block B-Series:383 (6.3L)/400 (6.6L)

Part Type

Engine Valve Spring Kit

Additional Application Notes
• High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. For Use w/Edelbrock 60119/60139 Cyl. Heads
• Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. High-Perf. Street For Use w/Edelbrock 60119/60139 Cyl. Heads Coil Bind 1.160in.
• Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. High-Perf. Street For Use w/Edelbrock 60119/60139 Cyl. Heads Coil Bind 1.160in.
• High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. High-Perf. Street For Use w/Edelbrock 60119/60139 Cyl. Heads Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. Coil Bind 1.160in.
• Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. High-Perf. Street For Use w/Cast Iron OE Heads or Edelbrock 5093/60189/60929 Cyl. Heads Coil Bind 1.160in.
• High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. For Use w/Cast Iron OE Heads or Edelbrock 5093/60189/60929 Cyl. Heads
• Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. High-Perf. Street For Use w/Cast Iron OE Heads or Edelbrock 5093/60189/60929 Cyl. Heads Coil Bind 1.160in.
• Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. High-Perf. Street For Use w/Edelbrock 60049 Cyl. Head Coil Bind 1.160in.
• High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. For Use w/Edelbrock 60049 Cyl. Head
• High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. For Use w/Edelbrock 60819 Cyl. Heads
• Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. High-Perf. Street For Use w/Edelbrock 60819 Cyl. Heads Coil Bind 1.160in.
• High-Performance Street; Non-Rotator; Seat Pressure 120 lbs.; OD 1.55 in.; ID 1.12 in.
• High-Performance Street; Non-Rotator; Seat Pressure 120 lbs.; OD 1.55 in.; ID 1.12 in. High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. For Use w/Cast Iron OE Heads or Edelbrock 5093/60189/60929 Cyl. Heads
• High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. For Use w/Edelbrock 61629/61699 Cyl. Heads
• Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. High-Perf. Street For Use w/Edelbrock 61629/61699 Cyl. Heads Coil Bind 1.160in.
• High-Performance Street; Non-Rotator; Seat Pressure 120 lbs.; OD 1.55"; ID 1.12" High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. For Use w/Cast Iron OE Heads or Edelbrock 5093/60189/60929 Cyl. Heads
• High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. For Use w/Edelbrock 60069/60079 Cyl. Heads
• Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. High-Perf. Street For Use w/Edelbrock 60069/60079 Cyl. Heads Coil Bind 1.160in.
• Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. High-Perf. Street For Use w/Edelbrock 61629/61699 Cyl. Heads Coil Bind 1.160in.
• Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. High-Perf. Street For Use w/Edelbrock 60069/60079 Cyl. Heads Coil Bind 1.160in.
• High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. High-Perf. Street For Use w/Edelbrock 61629/61699 Cyl. Heads Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. Coil Bind 1.160in.
• High-Perf. Street; Non-Rotator; Seat Press. 132 lbs.; Installed H 1.90 in.; Open Pres. 312 lbs. at 0.500 in.; OD 1.55 in.; ID 1.12 in.; Coil Bind 1.160in. High-Perf. Street For Use w/Edelbrock 60069/60079 Cyl. Heads Seat Press. 132 lbs. Open Pres. 312 lbs. at 0.500 in. OD 1.55 in. Non-Rotator Installed H 1.90 in. ID 1.12 in. Coil Bind 1.160in.

These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.

Data: v2 - Desc: v4.2 - Upd: 2026-11-08 00:25:24

Data: v4.2 - Upd: 2026-11-10 20:35:50

Features

Use with Original Equipment Heads Only

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Specifications

Product Details

Camshaft Type:	Hydraulic Flat Tappet
Coil Bind Height (in.):	OEM
Coil Bind Height:	OEM
Damper Spring Included:	Yes
Description:	Sure Seat Valve Spring
Inside Diameter:	1.120 in.
Installed Height (in.):	1.885
Installed Height:	1.885 in.
Installed Pressure (lbs.):	120
Installed Pressure:	120 lbs.
Material:	Chromium Silicon
Open Height (in.):	1.885
Open Height:	1.885 in.
Open Pressure (lbs.):	320
Outside Diameter:	1.550
Part Number:	ede5792
Position:	Exhaust or Intake
Quantity:	Set of 16
Spring Type:	Cylindrical
Springs Per Valve:	Single
Tubing Length:	320

Reference Information

Reference Data (Provide these details to our support team)
Brand Name/s	Edelbrock
StreetFX SKU	ede5792
SFX Item ID	4237301
Accounting SKU	ede-5792
Manufacturer SKU	5792
Manufacturer UPC	85347057924
Alternative References	5792, EDB5792, EDL-5792

Valve Springs, Sure Seat, Single, 1.550 in. Outside Diameter, 1.160 in. Coil Bind Height, Set of 16

Upgrading your camshaft? Get maximum performance with matching valve springs. Edelbrock's Sure Seat valve springs are made of the highest quality spring wire and are precision-wound to exact specifications. They are designed for use on OEM heads when used in conjunction with their Performer-Plus, Performer RPM, and Torker-Plus camshafts. They'll work with the stock rotators (if applicable) and fit the spring pockets perfectly.

Product Attributes
Brand	Edelbrock
Manufacturer's Part Number	5792
Part Type	Valve Springs
Product Line	Edelbrock Sure Seat Valve Springs
UPC	085347057924
Valve Spring Style	Standard
Number of Springs Per Valve	Single
Retainers Included	No
Outside Diameter of Outer Spring (in.)	1.550 in.
Coil Bind Height (in.)	1.160 in.
Damper Spring Included	Yes
Spring Rate (lbs./in.)	330 lbs./in.
Inside Diameter of Outer Spring (in.)	1.120 in.
Locks Included	No
Valve Stem Seals Included	No
Valve Springs Coated	No
Remanufactured	No
Quantity	Sold as a set of 16.

Manufacturer Attributes
Outside Diameter	1.550
Camshaft Type	Hydraulic Flat Tappet
Damper Spring Included	Yes
Material	Chromium Silicon
Spring Type	Cylindrical
Quantity	Set of 16
Springs Per Valve	Single
Product Class	Engine Valve Spring Kit
Construction/Type	The Edelbrock #5792 Sure Seat Valve Spring for Chrysler 383-400-413-440 V8 1969-79 O.E Cast iron cylinder heads are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts.
Vehicle Designations	Chrysler:Big-Block B-Series:383 (6.3L)/400 (6.6L)
Vehicle Brief	Edelbrock Sure Seat Valve Springs
Market Description	The Edelbrock #5792 Sure Seat Valve Spring for Chrysler 383-400-413-440 V8 1969-79 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.