Edelbrock V/S Chev 262-400 Perf RPM and Torker Spring Kit

SKU: EDE5794

Valve Springs

EDE Valve Springs...

Edelbrock

Edelbrock V/S Chev 262-400 Perf RPM and Torker Spring Kit

SKU: EDE5794

Valve Springs

EDE Valve Springs...

Available from MFR. In stock at 2 locations (9 available)

We accept

Description

Valve Spring - Sure Seat - Single Spring / Damper - 357 lb/in Spring Rate - 1.120 in Coil Bind - 1.265 in OD - Steel Retainers / Steel Valve Locks Included - Small Block Chevy - Kit

VALVE SPRINGS

Edelbrock part #5794 Sure Seat Valve Spring Kit is designed for Small-Block Chevy O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original equipment heads when installing Edelbrock Performer-Plus camshafts. The valve springs are designed for use with OEM valve rotators. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application. Set of 16.Valve Spring Specifications:Type: Non-Rotator Seat Pressure: 110 lbs.Installed Height: 1.700"Open Pressure: 285 lbs. @ 0.490"Outside Diameter: 1.265"Inside Diameter: 1.060"Coil Bind: 1.160"

Additional Information

V/S SBC TORKER SPRING KIT

Application Summary

Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

Part Type

Engine Valve Spring Kit

Product Overview

Edelbrock part #5794 Sure Seat Valve Spring Kit is designed for Small-Block Chevy O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original equipment heads when installing Edelbrock Performer-Plus camshafts. The valve springs are designed for use with OEM valve rotators. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application. Set of 16. Valve Spring Specifications: Type: Non-Rotator Seat Pressure: 110 lbs. Installed Height: 1.700" Open Pressure: 285 lbs. @ 0.490" Outside Diameter: 1.265" Inside Diameter: 1.060" Coil Bind: 1.160"

Additional Application Notes
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. Complete Spring/Retainer/Lock Kit~For Use w/Cast Iron OE Cyl. Heads
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street For Use w/Cast Iron OE Cyl. Heads~ Complete Spring/Retainer/Lock Kit Coil Bind 1.160in.
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast Iron OE Cyl. Heads~ Complete Spring/Retainer/Lock Kit
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. HighPerf.Street For Use w/Cast Iron OE Cyl. Heads~ Complete Spring/Retainer/Lock Kit Coil Bind 1.160in.
• High-Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in.
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High-Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. Complete Spring/Retainer/Lock Kit~For Use w/Cast Iron OE Cyl. Heads
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High-Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. For Use w/Cast Iron OE Cyl. Heads~ Complete Spring/Retainer/Lock Kit
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast Iron OE Cy
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.70
• Sure Seat Kit; High-Performance Street; Seat Pressure 104-116 lbs.; OD 1.265"; ID 7/8" HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast Iron OE Cyl. Heads~ Complete Spring/Retainer/Lock Kit
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Ins
• HighPerf.Street; No
• Seat Press. 110lbs. Open
• HighPerf.Street; Non-Rotator; Se
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Stree
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High-Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. Complete Spring/Retainer/Lock Kit~For Use w/Cast Iron OE Cyl. H
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. HighPerf.Street For Use w/Cast Iron OE Cyl. H
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.;
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 2
• HighPerf
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High-Performance
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Insta
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street For
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street For Use w/Cast Iron OE Cyl. Heads
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High-Performan
• HighPerf.Street; Non-Rotator; Seat
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. For Use w/Cast Iron OE C
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.7
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street For Use w/Cast Iron OE Cyl. Heads~ Complete Spring
• HighPerf.Street; Non-Rot
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High-Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. Complete
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Op
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High-Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. Co
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. HighPerf.Street For Use w/Cast Iron OE Cyl.
• HighPerf.
• Hi
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.;
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High-Performance Street;
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street For Use w/Cast Iron OE Cyl. Heads~ Complete
• Seat Press. 110lbs. Open Press. 2
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High-Performance Street; Non-Rota
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. HighPerf.Street For Use w/Cast Iron OE Cyl. Heads~ C
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in
• HighPerf.Str
• HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. High-Performance Street; Non-Rotator; Seat Pressure 104-116 lbs.; OD 1.265 in.; ID 7/8 in. Complete Spring/Retainer/Lock K
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H 1.700in.; Open Press. 285lbs. at 0.490in.; OD 1.265in.; ID 0.880in.; Coil Bind 1.160in. HighPe
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. HighPerf.Street; Non-Rotator; Seat Press. 110lbs.; Installed H
• Seat Press. 110lbs. Open Press. 285lbs. at 0.490in. OD 1.265in. Non-Rotator Installed H 1.700in. ID 0.880in. H
• HighPerf.Stre

These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.

Data: v2 - Desc: v4.2 - Upd: 2026-11-08 00:25:20

Data: v4.2 - Upd: 2026-11-08 18:36:56

Features

Great Match to Edelbrock Camshaft Kit

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Specifications

Product Details

Camshaft Type:	Hydraulic Flat Tappet
Coil Bind Height (in.):	1.16
Coil Bind Height:	1.160
Damper Spring Included:	Yes
Description:	Sure Seat Valve Spring Kit
Inside Diameter:	0.880
Installed Height (in.):	1.7
Installed Height:	1.700
Installed Pressure (lbs.):	110
Installed Pressure:	110
Locks Included:	Yes
Material:	Chromium Silicon
Open Height (in.):	1.7
Open Height:	1.700 in.
Open Pressure (lbs.):	285
Open Pressure:	285
Outside Diameter:	1.265
Part Number:	ede5794
Quantity:	Kit
Retainers Included:	Yes
Spring Open Height:	0.490
Spring Type:	Cylindrical
Springs Per Valve:	Single
Tubing Length:	285

Reference Information

Reference Data (Provide these details to our support team)
Brand Name/s	Edelbrock
StreetFX SKU	ede5794
SFX Item ID	4237295
Accounting SKU	ede-5794
Manufacturer SKU	5794
Manufacturer UPC	85347057948
Alternative References	5794, EDB5794, EDL-5794

Valve Spring Kit, Sure Seat, Single, 1.265 in. Outside Diameter, Steel Retainers, Steel Locks, 7 degree, Kit

Edelbrock Sure Seat valve spring kits are designed for small block Chevy OE cast iron heads. Made of the highest quality spring wire and precision wound to close tolerances, these springs are ideal when installing Edelbrock Performer-Plus camshafts. The valve springs are machined for use with OEM valve rotators. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application. Kits contain non-rotator valve springs, retainers, and matching 7 degree valve stem locks. They're available in single or dual options, in a variety of diameters and heights.

Product Attributes
Brand	Edelbrock
Manufacturer's Part Number	5794
Part Type	Valve Springs
Product Line	Edelbrock Sure Seat Valve Spring Kits
UPC	085347057948
Valve Spring Style	Standard
Number of Springs Per Valve	Single
Retainers Included	Yes
Retainer Material	Steel
Outside Diameter of Outer Spring (in.)	1.265 in.
Coil Bind Height (in.)	1.160 in.
Damper Spring Included	Yes
Inside Diameter of Outer Spring (in.)	0.880 in.
Locks Included	Yes
Lock Material	Steel
Lock Groove Quantity	1-groove
Lock Style	7 degree
Valve Stem Seals Included	No
Valve Springs Coated	No
Valve Stem Diameter (in.)	0.344 in.
Valve Stem Diameter (mm)	8.74mm
Remanufactured	No
Quantity	Sold as a kit.

Manufacturer Attributes
Installed Pressure	110
Springs Per Valve	Single
Inside Diameter	0.880
Quantity	Kit
Retainers Included	Yes
Locks Included	Yes
Material	Chromium Silicon
Installed Height	1.700
Spring Open Height	0.490
Outside Diameter	1.265
Spring Type	Cylindrical
Camshaft Type	Hydraulic Flat Tappet
Coil Bind Height	1.160
Damper Spring Included	Yes
Open Pressure	285
Product Class	Engine Valve Spring Kit
Construction/Type	Edelbrock part #5794 Sure Seat Valve Spring Kit is designed for Small-Block Chevy O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. Set of 16.
Vehicle Designations	Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Vehicle Brief	Edelbrock Engine Valve Spring Kit
Market Description	Edelbrock part #5794 Sure Seat Valve Spring Kit is designed for Small-Block Chevy O.E Cast Iron Heads. Made of highest quality spring wire and precision wound to close tolerances. This Sure Seat Valve Spring set is for use on original equipment heads when installing Edelbrock Performer-Plus camshafts. The valve springs are designed for use with OEM valve rotators. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application. Set of 16. Valve Spring Specifications: Type: Non-Rotator Seat Pressure: 110 lbs. Installed Height: 1.700" Open Pressure: 285 lbs. @ 0.490" Outside Diameter: 1.265" Inside Diameter: 1.060" Coil Bind: 1.160"