Edelbrock V/S Performer Chev 262-400 Non Rotator

SKU: EDE5802

Valve Springs

EDE Valve Springs...

Edelbrock

Edelbrock V/S Performer Chev 262-400 Non Rotator

SKU: EDE5802

Valve Springs

EDE Valve Springs...

Available from MFR. In stock at 2 locations (more than 10 available)

We accept

Description

Valve Spring - Sure Seat - Single Spring - 252 lb/in Spring Rate - 1.150 in Coil Bind - 1.222 in OD - Small Block Chevy - Set of 16

VALVE SPRINGS

The Edelbrock #5802 Sure Seat Valve Spring for Chevy 262-400 V8 1957-95 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance'springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.

Additional Information

V/S V8 262-400

Application Summary

Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

Part Type

Engine Valve Spring Kit

Additional Application Notes
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~For Use w/Cast Iron OE Cyl. Heads~Use Non-Rotator Springs 5802 w/Stock Rotators
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy Coil Bind 1.150in.
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy Coil Bind 1.150in.
• Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.; ID 7/8 in.
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.; ID 7/8 in. 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~For Use w/Cast Iron OE Cyl. Heads~Use Non-Rotator Springs 5802 w/Stock Rotators
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Veh
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.; ID 7/8 in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.; ID 7/8 in. 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~For Use w/Cast Iron OE Cyl. Heads~Use Non-Rotator
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bi
• Street; Non-Rotator; Seat Press. 8
• Street Some 77 and Later V
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416; Seat Pressure 76-84 lbs.; OD 1.222"; ID 7/8" For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. For Use w/Ca
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Spr
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators For
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.; ID 7/8 in. 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~For Use w/
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Have
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in.
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Ro
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles H
• Street; Non-Rotator; Seat Press. 80 lbs.; Instal
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. For Use
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~For Use w/Cast Iron OE C
• Street; Non-Rotator; Seat Press. 80 lbs.; Inst
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Have He
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in
• Street; Non-Rotator; Seat Press. 80 lb
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at
• Street Some 77 and Later Vehicles Have Heads 140
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 C
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Sea
• Street Some 77 and L
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non
• Street; Non-Rotator; Seat Pr
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.; ID 7/8 in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehi
• Street; Non-Rotator;
• Street; Non-Rotator; Seat Press. 80
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.;
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Hav
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.; ID 7/8 in. 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~For Use w/Cast Iro
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.7
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Have Heads
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Ca
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 l
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Cast Iron OE C
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators For Use w/Cast Iron
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.; ID 7/8 in. 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~For Use w/Cast Iron OE Cyl. Head
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.4
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Cast Iron OE
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~ Use No
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.; ID 7/8 in. 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~For Use w/Cast Iron OE Cyl. Heads~Use No
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1
• Street Some 77 and Later Vehicles Have Heads
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Us
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Cast Iron
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.; ID
• Street; Non-Rotator; Seat Press. 80 lbs.; In
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator I
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80 lbs. Open Press. 200 lbs. at 0.475in. OD 1.222 in. Non-Rotator Installed H 1.700in. ID 0.87 in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 77
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.;
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. Street; Non-Rotator; For Heads w/OE[14011416]; Seat Pressure 76-84 lbs.; OD 1.222 in.; ID 7/8 in. 305-350 Chevy; Some 77 and Later Vehicles Have Heads 14014416~For Use w/Cast Iron OE Cyl. Heads~
• Street Some 77 and Later Vehicles Have Heads 14014416~ Use Non-Rotator Springs 5802 w/Stock Rotators Seat Press. 80
• Street; Non-Rotator; Seat Press. 80 lbs.; Installed H 1.700in.; Open Press. 200 lbs. at 0.475in.; OD 1.222 in.; ID 0.87 in.; Coil Bind 1.150in. For Use w/Cast Iron OE Cyl. Heads~ 305-350 Chevy; Some 7

These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.

Data: v4.2 - Upd: 2026-11-08 08:19:35

Features

Use with Original Equipment Heads Only

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Specifications

Product Details

Camshaft Type:	Hydraulic Flat Tappet
Coil Bind Height (in.):	OEM
Coil Bind Height:	1.150
Damper Spring Included:	Yes
Description:	Sure Seat Valve Spring
Inside Diameter:	1.222
Installed Height (in.):	1.7
Installed Height:	1.700
Installed Pressure (lbs.):	80
Installed Pressure:	80
Material:	Chromium Silicon
Open Height (in.):	1.7
Open Height:	1.700 in.
Open Pressure (lbs.):	200
Open Pressure:	200
Outside Diameter:	0.875
Part Number:	ede5802
Position:	Exhaust or Intake
Quantity:	Set of 16
Spring Open Height:	0.475
Spring Type:	Cylindrical
Springs Per Valve:	Single
Tubing Length:	200

Product Downloads

#	Document Type	Download
1.	Installation Instructions

Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.

Data: v2 - Desc: v4.2 - Upd: 2026-11-08 00:25:23

Reference Information

Reference Data (Provide these details to our support team)
Brand Name/s	Edelbrock
StreetFX SKU	ede5802
SFX Item ID	4237299
Accounting SKU	ede-5802
Manufacturer SKU	5802
Manufacturer UPC	85347058020
Alternative References	EDB5802, EDL-5802

Valve Springs, Sure Seat, Single, 1.222 in. Outside Diameter, Non-Rotator, Chevy, Small Block, Set of 16

Upgrading your camshaft? Get maximum performance with matching valve springs. Edelbrock's Sure Seat valve springs are made of the highest quality spring wire and are precision-wound to exact specifications. They are designed for use on OEM heads when used in conjunction with their Performer-Plus, Performer RPM, and Torker-Plus camshafts. They'll work with the stock rotators (if applicable) and fit the spring pockets perfectly.

Product Attributes
Brand	Edelbrock
Manufacturer's Part Number	5802
Part Type	Valve Springs
Product Line	Edelbrock Sure Seat Valve Springs
UPC	085347058020
Valve Spring Style	Standard
Number of Springs Per Valve	Single
Retainers Included	No
Outside Diameter of Outer Spring (in.)	1.222 in.
Coil Bind Height (in.)	1.150 in.
Damper Spring Included	Yes
Spring Rate (lbs./in.)	255 lbs./in.
Inside Diameter of Outer Spring (in.)	0.875 in.
Inside Diameter of Inner Spring (in.)	0.875 in.
Locks Included	No
Valve Stem Seals Included	No
Valve Springs Coated	No
Remanufactured	No
Quantity	Sold as a set of 16.
Notes	Designed for use with non-rotator style retainers.

Manufacturer Attributes
Springs Per Valve	Single
Installed Pressure	80
Damper Spring Included	Yes
Outside Diameter	0.875
Quantity	Set of 16
Camshaft Type	Hydraulic Flat Tappet
Spring Open Height	0.475
Open Pressure	200
Material	Chromium Silicon
Inside Diameter	1.222
Installed Height	1.700
Coil Bind Height	1.150
Spring Type	Cylindrical
Product Class	Engine Valve Spring Kit
Construction/Type	The Edelbrock #5802 Sure Seat Valve Spring for Chevy 262-400 V8 1957-95 O.E Cast iron cylinder heads are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts.
Vehicle Designations	Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L)
Vehicle Brief	Edelbrock Sure Seat Valve Springs
Market Description	The Edelbrock #5802 Sure Seat Valve Spring for Chevy 262-400 V8 1957-95 O.E Cast iron cylinder heads are made of highest quality spring wire and precision wound to close tolerances, our Sure Seat Valve Spring sets are for use on original equipment heads when installing Edelbrock Performer-Plus, Performer RPM and Torker-Plus camshafts. These are the same high-performance springs used on Edelbrock Performer and RPM cylinder heads. For camshaft warranty compliance, use only the springs recommended by Edelbrock for each camshaft application.