Description
Camshaft / Lifters - Performer RPM - Hydraulic Flat Tappet - Lift 0.488 / 0.510 in - Duration 308 / 318 - 112 LSA - 1500 / 6500 RPM - Small Block Mopar - Kit
Edelbrock Perf RPM Cam and Lifters Kit Chrys 318-360
Edelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft.Camshaft Specifications:- Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees- Lift @ Valve Intake: .488"- Lift @ Valve Exhaust: .510"- Lobe Separation: 112 Degrees- Intake Centerline: 107 Degrees
Additional Information
Edelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine.
Application Summary
Chrysler:Small-Block:273 (4.5L)/318 (5.2L)/340 (5.6L)/360 (5.9L)
Part Type
Engine Camshaft and Lifter Kit
Product Overview
Edelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees - Lift @ Valve Intake: .488" - Lift @ Valve Exhaust: .510" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees
| Additional Application Notes | |
|---|---|
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and 397 ft.-lbs. When Matched w/60779 Heads Lobe Seps 112 Deg. Lift at Valve Int/Exh 0.488/0.510 in. Intake Center Line 107 Deg. Hyd. Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Adv. Dur. at 0.050 Int/Exh 234/244 Deg. 1500-6500rpm | |
| • Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.488/0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Adjustable Pushrods Or Rocker Arms Required~Designed For The Engine Swap Market~Idle Vacuum at 1000 RPM - 10 inch~Not For 1985 And Later Engines w/Roller Lifters~Not Legal For Use On Pollution Controlled Vehicles~Produces 417hp and 397 ft.-lbs. When Matched w/60779 Heads | |
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and 397 ft.-lbs. When Matched w/60779 Heads Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.488/0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle | |
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and 397 ft.-lbs. When Matched w/60779 Heads Lobe Seps 112 Deg. Lift at Valve Int/Exh 0.488/0.510 in. Intake Center Line 107 Deg. Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.488/0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Hyd. Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Adv. Dur. at 0.050 Int/Exh 234/244 Deg. 1500-6500rpm | |
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and 397 ft.-lbs. When Matched w/60779 Heads Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.488/0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Tra | |
| • Not For 1985 And Later Engines w/Rolle | |
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and 397 ft.-lbs. When Matched w/7176 Intake and 60779 Heads Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.488/0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle | |
| • Not For 1985 And Later Engines w/Roller Lif | |
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and 397 ft.-lbs. When Matched w/60779 Heads Lobe Seps 112 Deg. Lift at Valve Int/Exh 0.488/0.510 in. Intake Center Line 107 Deg. Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.488/0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted | |
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and 397 ft.-lbs. When Matched w/60779 Heads Lobe Seps 112 Deg. Lift at Valve Int/Exh 0.488/0.510 in. Intake Center Line 107 Deg. Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0 | |
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and 397 ft.-lbs. When | |
| • Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Ex | |
| • Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.488/0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Adjustable Pushrods Or Rocker Arms Required~D | |
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and 397 ft.-lbs. Wh | |
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and 397 ft.-lbs. When Matched w/60779 Heads Lobe Seps 112 Deg. Lift at Valve Int/Exh 0.488/0.510 in. Intake Center Line 107 Deg. Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.488/0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution Veh | |
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and | |
| • Not For 1985 And Later Engines w/Roller Lifters~ Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 417hp and 397 ft.-lbs. When Matched w/60779 Heads Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 234/244 Deg.; Lift at Valve Int/Exh 0.488/0.510 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.;Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Hyd. Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Lobe Seps 112 Deg. Lift at Valve Int/Exh 0.488/0.510 in. Intake Center Line 107 Deg. Adv. Dur. at 0.050 Int/Exh 234/244 Deg. 1500-6500rpm | |
These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.
Features
- Take the Guesswork Out of Camshaft Selection!
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Specifications
Product Details
| Advertised Exhaust Duration: | 318 |
| Advertised Intake Duration: | 308 |
| Cam Type: | Cast |
| Computer Controlled Compatible: | No |
| Description: | Performer RPM Camshaft Kit |
| Engine Make/Size: | Mopar 318-360 |
| Exh. Duration @ .050 in. (Deg): | 244 |
| Exh. Duration Advertised (Deg): | 318 |
| Exhaust Duration at .050 inch Lift: | 244 |
| Exhaust Valve Lift (in.): | 0.51 |
| Exhaust Valve Lift: | 0.510 |
| Grade Type: | Performance |
| Int. Duration @ .050 in. (Deg): | 234 |
| Int. Duration Advertised (Deg): | 308 |
| Intake Duration .050 Inch Lift: | 234 |
| Intake Duration @ 0.050 in.: | 234 Degree |
| Intake Duration Advertised: | 308 |
| Intake Valve Lift (in.): | 0.488 |
| Intake Valve Lift: | 0.488 |
| Lifter Materials: | Hardened Steel |
| Lifter Type: | Hydraulic |
| Part Number: | ede7177 |
| RPM Range: | 1000-7000 |
| Usage: | Street/Performance |
Product Downloads
| # | Document Type | Download |
|---|---|---|
| 1. | Installation Instructions |
|
Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.
Reference Information
| Reference Data (Provide these details to our support team) | |
|---|---|
| Brand Name/s | Edelbrock |
| StreetFX SKU | ede7177 |
| SFX Item ID | 4236674 |
| Accounting SKU | ede-7177 |
| Manufacturer SKU | 7177 |
| Manufacturer UPC | 85347071777 |
| Alternative References | EDB7177, EDL-7177 |
Cam and Lifters, Hydraulic Flat Tappet, Advertised Duration 308/318, Lift .488/.510, Mopar, Small Block, Kit
Why are Performer RPM cam and lifter kits the heart of the Total Power Package? Because Edelbrock designs them to perfectly match the powerband of their Performer RPM series of intake manifolds. They do this by testing and tuning them together on engine dynamometers for maximum performance. There's no guesswork about parts compatibility, and you can be sure that all of the combinations will perform. The kits are recommended for high-performance street and strip use. Their powerband is from 1,500 to 6,500 rpm, and they maintain 10 to 12 in. of vacuum at idle.
| Product Attributes | |
|---|---|
| Brand | Edelbrock |
| Manufacturer's Part Number | 7177 |
| Part Type | Camshaft Kits |
| Product Line | Edelbrock Performer RPM Cam and Lifter Kits |
| UPC | 085347071777 |
| Cam Style | Hydraulic flat tappet |
| Basic Operating RPM Range | 1,500-6,500 |
| Camshaft Use | Street/Strip |
| Intake Duration at 050 inch Lift | 234 |
| Exhaust Duration at 050 inch Lift | 244 |
| Duration at 050 inch Lift | 234 int./244 exh. |
| Advertised Intake Duration | 308 |
| Advertised Exhaust Duration | 318 |
| Advertised Duration | 308 int./318 exh. |
| Intake Valve Lift with Factory Rocker Arm Ratio | 0.488 in. |
| Exhaust Valve Lift with Factory Rocker Arm Ratio | 0.510 in. |
| Valve Lift with Factory Rocker Arm Ratio | 0.488 int./0.510 exh. |
| Computer-Controlled Compatible | No |
| Lifters Included | Yes |
| Lifter Style | Hydraulic flat tappet |
| Valve Springs Included | No |
| Retainers Included | No |
| Locks Included | No |
| Valve Stem Seals Included | No |
| Timing Chain and Gears Included | No |
| Assembly Lubricant Included | Yes |
| Pushrods Included | No |
| Rocker Arms Included | No |
| Gaskets Included | No |
| Valve Springs Required | Yes |
| Quantity | Sold as a kit. |
| Notes | Although the advertised RPM range for these camshafts is 1,500 to 6,500 rpm, for best performance we recommend a minimum 3,000 rpm stall torque converter be used in applications with automatic transmissions. |
| Manufacturer Attributes | |
|---|---|
| Exhaust Valve Lift | 0.510 |
| Exhaust Duration at .050 inch Lift | 244 |
| Lifter Type | Hydraulic |
| Advertised Intake Duration | 308 |
| Grade Type | Performance |
| Intake Duration .050 Inch Lift | 234 |
| Cam Type | Cast |
| Lobe Separation | 112 |
| Computer Controlled Compatible | No |
| Intake Valve Lift | 0.488 |
| Advertised Exhaust Duration | 318 |
| Lifter Materials | Hardened Steel |
| Product Class | Engine Camshaft and Lifter Kit |
| Construction/Type | Edelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine. |
| Vehicle Designations | Chrysler:Small-Block:273 (4.5L)/318 (5.2L)/340 (5.6L)/360 (5.9L) |
| Vehicle Brief | Edelbrock Performer RPM Camshaft Kit |
| Market Description | Edelbrock part #7177 Performer RPM Camshaft is designed for small-block Chrysler 318-340-360 V-8 applications. This Edelbrock cam kit produced 417 HP & 397 ft-lbs. of torque when used with #7176 intake and #60779 cylinder heads on a 340 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 234 degrees - Duration @ .050 Exhaust: 244 degrees - Lift @ Valve Intake: .488" - Lift @ Valve Exhaust: .510" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees |
Compatibility
Loading compatibility information...
Keep shopping
More from Edelbrock
Edelbrock
Edelbrock Carburetor Performer Series 4-Barrel 600 CFM Electric Choke Satin Finish
ede1406
A$1,054.71
