Fleece Performance 89-07 Dodge 5.9L / 07.5-12 6.7L Cummins Crankshaft Barring Tool

Turn over your Cummins with ease with this Cummins Crankshaft Barring Tool. Features: Accepts 1/2" drive ratchet Designed to be used with factory crank bolts and roll pins No need to remove after installed Built from 1018 steel Yellow zinc plated for corrosion resistance

Additional Information

Cummins Crankshaft Barring Tool (Fits all Stock 5.9L and 6.7L Stock Dampers and Fluidamprs)

Part Type

Engine Crankshaft Turning Socket Tool

• Accepts 1/2" drive ratchet
• Built from 1018 steel
• Designed to be used with factory crank bolts and roll pins
• No need to remove after installed
• Yellow zinc plated for corrosion resistance

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Reference Information

Crankshaft Barring Tool, Steel, Nickel Plated, Each

Turn over your Cummins with ease with a Fleece Performance crankshaft barring tool. These flywheel turning tools are much easier to use than the barring tool that interfaces the flywheel housing and starter ring gear. To use: simply remove the four bolts holding on the damper, install this tool, reinstall the bolts, and torque to spec. You'll never back a bolt out of the damper when trying to reach TDC and overshoot. In addition, these barring tools are especially useful when removing and reinstalling a transmission. There's no need to use a pry bar on the starter ring gear to rotate the engine to R&R converter bolts.

Additional features include:
• Built from 1018 steel
• Electroless nickel plated for corrosion resistance
• Accepts 1/2 in. drive ratchet
• Designed to be used with factory crank bolts and roll pins
• No need to remove after installed
• Works with Vibratech Fluidampr, as well as factory dampers