Pressure Sensor

This kit is required for pressure readings to be obtained directly from the exhaust manifold, or compressor inlet/outlet air pressure measurements if temperatures will exceed 220 deg F. Sensors directly fitted to exhaust manifolds will deteriorate extremely fast, therefore, a remote mount kit must be present to isolate the temperature from the sensor and ensure longevity and accuracy of the sensor. Hardware is included to bulkhead mount the pressure sensor or mount it using a P-Clamp. Works with Banks pressure sensors, and both 4-channel and 5-channel Analog or Frequency modules. Includes all necessary hardware.

Additional Information

Pressure Sensor Remote Mount Kit for High-Temperature/Drive Pressure Measurements

Part Type

Gauge Pod

Product Overview

Obtain air pressure readings without destroying your sensor(s). In some situations it is better to mount sensors remotely to isolate readings while protecting sensors from other elements which may cause premature failure. Mounting the sensor remotely allows safer reading and longer sensor life, and improved accuracy.

For high-temp situations, such as exhaust manifold temperature, mounting a sensor directly to the exhaust manifold will result in sensor failure. Mounting the sensor remotely allows safer reading and longer sensor life, and improved accuracy.

This universal kit is used to obtain pressure readings from any engine component where temperatures do not exceed 220° F. A remote mount kit helps to isolate the temperature, ensure longevity, and improve the accuracy of the sensor. Hardware is included to bulkhead mount the pressure sensor or mount it using a P-Clamp.

Note: For pressure measurements of air with temperatures exceeding 220° F, such as exhaust gas temperature and compressor out/intercooler inlet temperatures, we recommend the 66422 Pressure Sensor Remote Mount Kit, for High-Temperature/EGT Pressure Measurements.

Works with Banks pressure sensors, and both 4-channel and 5-channel Analog or Frequency modules.

Includes all necessary hardware.

Hardware included

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Details

Product Downloads

#	Document Type	Download
1.	Owner's Manual
2.	Photo - Primary

Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.

Reference Information

Sensor, EGT Pressure, Remote Mount, 6 ft. Tube, Hardware Included, Kit

Banks Power pressure sensor remote mount kits are used to obtain pressure readings from any engine component. Remote mount kits help to isolate the temperature, ensure longevity, and improve accuracy of the sensor. Choose from low temperature (220 degrees F or less) or high temperature (220 degrees F or higher) models.

Additional notes:
• Hardware is included to bulkhead mount the pressure sensor or mount it using a P-clamp
• Works with Banks pressure sensors, and both 4-channel and 5-channel analog or frequency modules
• Includes 6 ft. of tube length
• High temperature models are ideal for applications such as exhaust gas temperature (EGT) and compressor out/intercooler inlet temperatures