Holley Single-Channel EGT Controllers 554-188C Data Acquisition, EFI, Single-channel Module, CAN Controller, Dual CAN Connector Harness, for HP, Dominator, Terminator X EFI, Kit
Holley Single-Channel EGT Controllers 554-188C Data Acquisition, EFI, Single-channel Module, CAN Controller, Dual CAN Connector Harness, for HP, Dominator, Terminator X EFI, Kit
A$261.68
Special Order. Contact for ETA.
This item is out of stock in our warehouse and partner distribution centres. In some cases, this may be due to not having live inventory feeds available for all suppliers. Please contact us before ordering if you need to meet a specific deadline.
We accept
Description
Data: v2 - Desc: v4.2 - Upd: 2026-11-08 02:15:44
Features
Vehicle Compatibility and Return Conditions.
This item was designed and engineered in the USA for US domestic vehicles. OBD tools, ECUs, dongles, programmers, and tuners may have limited compatibility with vehicles outside the USA due to regional differences in emission standards and system configurations. Some features and functionality may vary depending on the vehicle and location.
Some electronic tuning devices and programmers require activation, registration, or pairing with a specific vehicle’s VIN (Vehicle Identification Number). Once activated or paired, these devices may become permanently associated with that vehicle, restricting or preventing their use on another vehicle, resticting our ability to offer returns or exchanges.
Please review the product details and images to ensure it meets your needs. For clarification or assistance, feel free to contact a StreetFX agent. Note: Returns are not accepted for special order or tuning products unless the unit is deemed faulty.
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Specifications
Reference Information
| Reference Data (Provide these details to our support team) | |
|---|---|
| Brand Name/s | Holley, Hilborn, Holley Efi, Retrobright, Terminator X |
| StreetFX SKU | hly554-188C |
| SFX Item ID | 4782922 |
| Accounting SKU | hly-554-188C |
| Manufacturer SKU | 554-188C |
| Manufacturer UPC | 090127060230 |
| Alternative References | 554-188C, HLY-554-188C, HOL554-188C |
Data Acquisition, Holley EFI, Single-channel Module, CAN EGT Controller, Dual CAN Connector Harness, for HP, Dominator, Terminator X EFI, Kit
Holley Single-Channel EGT controllers are designed for use with a K-type thermocouple using a "mini-K" connector. The module's accurate temperature measurement range is 32-2,282 degrees F (0-1250 C), with an accuracy of +/- 5 degrees F. The module is available in two versions: either CAN 1CH EGT, which is a plug-and-play installation for compatibility with Holley EFI products, such as HP and Dominator EFI systems; or Analog module, 1CH EGT with a "flying lead" with three wires exposed for power, ground, and signal for non-Holley EFI installations. Order the EGT controller suited to your application needs.
Plug-and-Play, 1CH EGT controller features:
• Supplied harness features two CAN connectors (one male, one female) that plug into the Holley main harness (or P/N: 558-412 kit Dominator only)
• LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts no thermocouple connected or it failed
• Note: before mounting, it is recommended you record the CAN ID Serial number from the sticker on bottom side of the unit for use during software setup
• Mounting: EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws
• Software setup
• Important note: Requires software and firmware Version 5 Build 31 or later
Analog module, 1CH EGT controller features:
• Wiring: harness is a "flying lead" with three wires exposed for power, ground, and signal (red wire: power 6.5 V-24.0 V; black wire: ground; and tan wire: Analog output)
• Outputs a 0-5 V and can be used with systems that have configurable 5 V inputs
• LED: Green LED indicator on unit shows solid green color to signify device is operational; flashing LED alerts thermocouple not connected or it failed
• EGT module is designed to be installed with zip-tie or a pair of #6 or #8 screws
• Analog setup: analog output scaling is accurate between 0.5 and 4.5 V and covers temperature range of a K-type thermocouple
| Product Attributes | |
|---|---|
| Brand | Holley |
| Manufacturer's Part Number | 554-188C |
| Part Type | Data Acquisition |
| Product Line | Holley Single-Channel EGT Controllers |
| UPC | 090127060230 |
| Quantity | Sold individually. |
| Notes | Single-channel CAN EGT controller. Compatible with HP or Dominator EFI, and Terminator X EFI. |
Compatibility
Loading compatibility information...
Keep shopping
More from Holley
