REAR UPPER LINKS

ICON’s billet aluminum rear upper link arms for the 2021-2026 Ford Bronco are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.

Additional Information

ICON billet upper links are light, strong, and engineered to improve off-road ride quality. Created with CNC machined 6061 aluminum they feature PTFE-lined rod ends, maintenance free bushings, and on-vehicle adjustment.

Part Type

Suspension Control Arm Kit

Product Overview

ICON’s billet aluminum rear upper link arms for the 2021-2023 Ford Bronco are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These links are made from CNC machined 6061 aluminum in-house and anodized for corrosion resistance, providing a major improvement over the construction of the stock units. This rear upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The quality rod ends and bushings featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form. After the design phase was completed ICON engineers put these parts through the “ICON1K” real-world test cycle for a final stamp of approval.

This item is available as a full kit.
Select a kit option in the following table if you are looking for this item in a bundle form with all associated components.

Kit option/s:

Thumb	SKU	Kit Title
	icoK40007	ICON 21-UP BRONCO NON-SASQUATCH 3-4" LIFT STAGE 7 SUSPENSION SYSTEM BILLET (1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700C, 1x ico48710C)
	icoK40008	ICON 21-UP BRONCO NON-SASQUATCH 3-4" LIFT STAGE 8 SUSPENSION SYSTEM BILLET (1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700E, 1x ico48710E, 1x ico43501)
	icoK40017	ICON 21-UP BRONCO SASQUATCH 2-3" LIFT STAGE 7 SUSPENSION SYSTEM BILLET (1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700C, 1x ico48710C)
	icoK40018	ICON 21-UP BRONCO SASQUATCH 2-3" LIFT STAGE 8 SUSPENSION SYSTEM BILLET (1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700E, 1x ico48710E, 1x ico43501)
	icoK40017X	ICON 21-23 Ford Bronco Sasquatch 2-3in Lift Stage 7 Suspension System Billet Heavy Rate (1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700C, 1x ico48711C)
	icoK40018X	ICON 21-23 Ford Bronco Sasquatch 2-3in Lift Stage 8 Suspension System Billet Heavy Rate (1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700E, 1x ico43501, 1x ico48711E)
	icoK40007X	(1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700C, 1x ico48711C)
	icoK40008X	(1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700E, 1x ico43501, 1x ico48711E)
	icoK40007D	(1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700X, 1x ico48710X)
	icoK40017D	(1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700X, 1x ico48710X)
	icoK40017DX	(1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700X, 1x ico48711X)
	icoK40007DX	(1x ico44100, 1x ico44000, 1x ico48500DJ, 1x ico44200T, 1x ico48700X, 1x ico48711X)

• CNC machined 6061 aluminum construction
• Covered by ICON’s Limited Lifetime Warranty
• Large FK Bearing JMX16T PTFE-lined rod ends
• Maintenance free, dual durometer bushings for maximum angularity and noise isolation
• On vehicle adjustment for different ride heights and pinion angles using ICON's Double Adjuster System
• Vehicle specific design for increased fuel tank clearance and maximum articulation

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Details

Product Downloads

#	Document Type	Download
1.	Installation Instructions

Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.

Reference Information

Link Arm, Rear Upper, Adjustable, Rod End Bearing, Polyurethane Bushing, Black, Billet Aluminum, Silver Anodized, Ford, Pair

Icon Vehicle Dynamics billet rear link arms are available for upper and lower positions, and both styles are adjustable.

Icon's billet aluminum link arms are significant upgrades over the factory units due to increases in strength and performance. CNC-machined in-house from 6061 aluminum and anodized for corrosion resistance, they feature PTFE-lined FK rod ends for increased suspension articulation and reduced deflection, plus multi-durometer bushings are installed that allow for noise-free operation and maximum angularity without the need for periodic greasing and/or other maintenance. Together, the quality rod ends and bushings allow your vehicle's suspension to function as intended, without the bushing bind that limits the vehicle in stock form. The link arms also offer on-vehicle link arm length adjustability using Icon's double adjuster system.

Finally, after the design phase was completed Icon engineers put these parts through the "ICON1K" real-world test cycle for a final stamp of approval. They are covered by Icon's lifetime warranty.