MagnaFlow Direct Fit Catalytic Converter 2001-2006 Sierra HD V8 6.0L Passenger Side
MagnaFlow Direct Fit Catalytic Converter 2001-2006 Sierra HD V8 6.0L Passenger Side
Description
OEM Grade
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52493. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 52493 includes (1) Crush Ring Gasket, (1) Flange Gasket, (1) Torca Clamp and interchanges with OE parts 15013591, 15091830, 19353132. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Information
Magnaflow OEM Grade Direct-Fit Catalytic Converter
Product Overview
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52493. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2006 Chevrolet Silverado 2500 HD, 2001-2006 GMC Sierra 2500 HD, and more, this direct-fit catalytic converter also interchanges with OE parts 15091830 and 15013591, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
| Additional Application Notes | |
|---|---|
| • OEM Grade Series; Bolt-On Outlet Attachment; 3 in. Tubing; Stainless Steel; Overall L-49.375 in.;Not Legal For Sale Or Installation In CA/CO/NY | |
| • OEM Grade Series; Bolt-On Outlet Attachment; 3 in. Tubing; Stainless Steel; Overall L-49.375 in.;Not Legal For Sale Or Use On Vehicles Registered In CA | |
| • OEM Grade Series; Bolt-On Outlet Attachment; 3 in. Tubing; Stainless Steel; Overall L-49.375 in.;Not Legal For Sale Or Installation In CA/CO/NY Low Emissions Vehicles (LEV) California Emissions Equipped Vehicles Registered Outside Of California | |
These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.
Features
- Durable 308 stainless steel MIG welds
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Expertly Crafted To Replicate Oem-Like Flow Dynamics/Maintaining Factory Performance And Fuel Efficiency
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Mandrel Bent Tubing Retains Oem-Like Design And Geometry
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- Simplifies Installation With Essential Gaskets And Hardware Being Included In The Box
- Your Trusted Source For EPA-Compliant Catalytic Converters
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Note on Vehicle Configuration
This listing includes the term "driver" or "passenger". Please note that this may refer to a region specific variation based on vehicle configuration (LHD/RHD) or regional preferences. Much of our database relates to US sourced products where "Driver" typically refers to the left-hand side in LHD vehicles, and "passenger" to the right. In RHD vehicles, this terminology is reversed. Review product details carefully for compatibility. Contact support if you have any questions. StreetFX may not accept returns for special order products.
(keyword: passenger)Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Specifications
Product Details
| Air Tube Adaptable: | No |
| Air Tube Count: | 0 |
| Body Height: | 4.000 in. |
| Body Length: | 9.000 in. |
| Body Material: | Stainless Steel |
| Body Shape: | Round |
| Body Type: | Spun |
| Body Width: | 4.000 in. |
| CARB Executive Order Number: | Not Applicable |
| Catalytic Converter Air Tube Adapter: | No |
| Clamp Included: | Yes |
| Clamps Included: | Yes |
| Converter Quantity: | 1 |
| Core Substrate Material: | Ceramic |
| Description: | OEM Grade Direct-Fit Catalytic Converter |
| Finish: | Stainless Steel |
| Gasket Included: | Yes |
| Gasket Or Seal Included: | Yes |
| Grade Type: | Regular |
| Hanger Included: | Yes |
| Hangers Included: | Yes |
| Heat Shield Attached: | No |
| Heat Shield Material: | None |
| Inlet Attachment Type: | Bolt-On |
| Inlet Attachment: | Bolt-On |
| Inlet Diameter: | 3.000 in. |
| Inlet Gasket Included: | Yes |
| Inlet Inside Diameter: | 3.000 in. |
| Inlet Mounting Hardware Included: | No |
| Inlet Quantity: | 1 |
| Inlet Type: | Bolt-On |
| Main Piping Diameter: | 3.000 in. |
| Material: | Stainless Steel |
| Mounting Hardware Included: | Yes |
| Outlet Attachment Type: | Bolt-On |
| Outlet Attachment: | Bolt-On |
| Outlet Diameter: | 3.000 in. |
| Outlet Gasket Included: | Yes |
| Outlet Inside Diameter: | 3 |
| Outlet Mounting Hardware Included: | No |
| Outlet Quantity: | 1 |
| Outlet Type: | Bolt-On |
| Overall Length: | 49.375 in. |
| Oxygen Sensor Location: | Pre Converter |
| Part Number: | mag52493 |
| Pipe Material: | Stainless Steel |
| Sensor Port Count: | 1 |
| Series: | OEM Grade |
| Substrate Material: | Ceramic |
| Substrate: | Ceramic |
| Tube Material: | Stainless Steel |
| Type: | Direct-Fit |
| Universal Or Specific Fit: | Specific |
Product Downloads
Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.
Reference Information
| Reference Data (Provide these details to our support team) | |
|---|---|
| Brand Name/s | Magnaflow, MagnaFlow Exhaust Products, MAGNAFLOW PERF EXHAUST, Magnaflow Performance |
| StreetFX SKU | mag52493 |
| SFX Item ID | 4288999 |
| Accounting SKU | mag-52493 |
| Manufacturer SKU | 52493 |
| Manufacturer UPC | 888563149431 |
| Alternative References | 52493, MFL52493, MPE-52493 |
Catalytic Converter, Direct-Fit Catalytic Converter
MagnaFlow OEM Grade Federal/EPA Compliant direct-fit catalytic converters provide your vehicle with high-emission compliance, the latest technology, and premium-grade components. Along with those benefits, you also get their industry-leading warranties, so you can drive with confidence. MagnaFlow converters are designed to the exact original equipment specifications, while being engineered to keep the "Check Engine Light" off.
Features include:
• Stainless steel construction
• CNC-precision robotic manufacturing
• Meets or exceeds EPA emissions requirements
• Hassle-free, OE-like fitment tailored to your specific application
• Limited 5-year/50,000 mile warranty on construction
• Limited 25,000 mile warranty on emissions
| Product Attributes | |
|---|---|
| Brand | MagnaFlow |
| Manufacturer's Part Number | 52493 |
| Part Type | Catalytic Converters |
| UPC | 888563149431 |
| Inlet Quantity | 1 |
| Inlet Diameter (in.) | 3.00 in. |
| Converter Inlet Attachment | Stock flange |
| Outlet Quantity | 1 |
| Outlet Diameter (in.) | 3.00 in. |
| Converter Outlet Attachment | Stock flange |
| Converter Case Material | Stainless steel |
| Converter Substrate Material | Ceramic substrate |
| Converter Overall Length (in.) | 49.38 |
| Converter Overall Width (in.) | 4.00 |
| Converter Style | 3-way |
| Remanufactured | No |
| AIR Tube | No |
| Heat Shield | No |
| Quantity | Sold individually. |
| Manufacturer Attributes | |
|---|---|
| Air Tube Count | 0 |
| Inlet Quantity | 1 |
| Outlet Quantity | 1 |
| Sensor Port Count | 1 |
| Inlet Inside Diameter | 3 |
| Outlet Inside Diameter | 3 |
| Body Height | 4 |
| Body Width | 4 |
| Overall Length | 49.375 |
| Body Length | 9 |
| Inlet Type | Bolt-On |
| Outlet Type | Bolt-On |
| Substrate Material | Ceramic |
| Heat Shield Attached | No |
| Inlet Mounting Hardware Included | No |
| Outlet Mounting Hardware Included | No |
| Air Tube Adaptable | No |
| Oxygen Sensor Location | Pre Converter |
| Grade Type | Regular |
| Body Shape | Round |
| Universal Or Specific Fit | Specific |
| Body Type | Spun |
| Finish | Stainless Steel |
| Tube Material | Stainless Steel |
| Body Material | Stainless Steel |
| Clamps Included | Yes |
| Hangers Included | Yes |
| Inlet Gasket Included | Yes |
| Outlet Gasket Included | Yes |
| CARB Executive Order Number | Not Applicable |
| Series | OEM Grade |
| Title | MagnaFlow OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter 52493 |
| Manufacturer Designation | OEM Grade Direct-Fit Catalytic Converter |
| Product Class | Catalytic Converter |
| Construction/Type | Magnaflow OEM Grade Direct-Fit Catalytic Converter |
| Product Outline | Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency Simplifies installation with essential gaskets and hardware being included in the box Durable 308 stainless steel MIG welds |
| Vehicle Brief | Catalytic Converter |
Compatibility
Loading compatibility information...

