MagnaFlow 2.25 CA Spun Cen/Ang Universal Converter
MagnaFlow 2.25 CA Spun Cen/Ang Universal Converter
A$2,944.42
Available from MFR.
This item is available from the manufacturer's distribution centre. The dispatch timeframe shown is an estimate based on historical order processing and release times for this part. This item is not held in our own warehouse, and actual dispatch timing may vary depending on manufacturer workload and logistics at the time of ordering.
We accept
Description
MagnaFlow 2.25 CA Spun Cen/Ang Universal Converter
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5582375. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Information
Magnaflow California Universal Catalytic Converter-2.25in.
Product Overview
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5582375. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
| Additional Application Notes | |
|---|---|
| • 2.25 in. Inlet/2.25 in. Outlet; L-8.125 in. Overall; Stainless Steel;CARB E.O. D-193-148 | |
| • Cutting and Welding Required During Installation~OE Spec 2.25 in. Inlet/2.25 in. Outlet; L-8.125 in. Overall; Stainless Steel;CARB E.O. D-193-148 | |
| • Cutting And Welding Required For Installation~Legal For Sale In All 50 States Including California Colorado and New York~EFN# KKMXT02.0HGF 2.25 in. Inlet/2.25 in. Outlet; L-8.125 in. Overall; Stainless Steel;CARB E.O. D-193-148 | |
These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.
Features
- Compact, lightweight construction enables installation in confined areas, welding is required
- Compact; Lightweight Construction Enables Installation In Confined Areas; Welding Is Required
- Durable 308 stainless steel MIG welds
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Expertly Formulated Catalyst Blend Maximizes Efficiency; Ensuring Optimal Emissions Control To Keep Your Light Off
- High Strength 16 Gauge 409 Stainless Steel Tubing For Exceptional Corrosion Resistance And Maximum Service Life
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Your Trusted Source For CARB-Compliant Catalytic Converters; Providing Assurance Of Genuine Compliance
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Specifications
Product Details
| Air Tube Adaptable: | No |
| Air Tube Count: | 0 |
| Body Height: | 5 |
| Body Length: | 8.125 in. |
| Body Material: | Stainless Steel |
| Body Shape: | Round |
| Body Type: | Spun |
| Body Width: | 5.000 in. |
| CARB Executive Order Number: | D-193-148 |
| Catalytic Converter Air Tube Adapter: | No |
| Clamp Included: | No |
| Clamps Included: | No |
| Converter Quantity: | 1 |
| Core Substrate Material: | Ceramic |
| Finish: | Stainless Steel |
| Gasket Included: | No |
| Gasket Or Seal Included: | No |
| Grade Type: | Regular |
| Hanger Included: | No |
| Hangers Included: | No |
| Heat Shield Attached: | No |
| Heat Shield Included: | Yes |
| Heat Shield Material: | None |
| Inlet Attachment Type: | Weld-On |
| Inlet Attachment: | Weld-On |
| Inlet Diameter: | 2.250 in. |
| Inlet Gasket Included: | No |
| Inlet Inside Diameter: | 2.25 |
| Inlet Mounting Hardware Included: | No |
| Inlet Orientation: | Angled |
| Inlet Quantity: | 1 |
| Inlet Type: | Weld-On |
| Material: | Stainless Steel |
| Mounting Hardware Included: | No |
| Outlet Attachment Type: | Weld-On |
| Outlet Attachment: | Weld-On |
| Outlet Diameter: | 2.500 in. |
| Outlet Gasket Included: | No |
| Outlet Inside Diameter: | 2.25 |
| Outlet Mounting Hardware Included: | No |
| Outlet Orientation: | Straight |
| Outlet Outside Diameter: | 2.250 in. |
| Outlet Quantity: | 1 |
| Outlet Type: | Weld-On |
| Overall Length: | 8.125 in. |
| Oxygen Sensor Location: | None |
| Part Number: | mag5582375 |
| Pipe Material: | Stainless Steel |
| Sensor Port Count: | 0 |
| Substrate Material: | Ceramic |
| Substrate: | Ceramic |
| Subtitle: | CARB Compliant Universal Catalytic Converter |
| Tube Material: | Stainless Steel |
| Type: | Universal |
| Universal Or Specific Fit: | Universal |
Product Downloads
| # | Document Type | Download |
|---|---|---|
| 1. | Technical Bulletin |
|
Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.
Reference Information
| Reference Data (Provide these details to our support team) | |
|---|---|
| Brand Name/s | Magnaflow, MagnaFlow Exhaust Products, MAGNAFLOW PERF EXHAUST, Magnaflow Performance |
| StreetFX SKU | mag5582375 |
| SFX Item ID | 4290699 |
| Accounting SKU | mag-5582375 |
| Manufacturer SKU | 5582375 |
| Manufacturer UPC | 888563158952 |
| Alternative References | 5582375, MFL5582375, MPE-5582375 |
Catalytic Converter, California Grade, Direct-Fit, Stainless Steel Case, Front Left/Right, 8.125 in. Overall Length, Audi, Volkswagen, 3.6L/4.2L, Each
MagnaFlow California Grade CARB Compliant direct-fit catalytic converters comply with California Air Resources Board (CARB) emissions regulations, which require more precious metals and rigorous testing, plus the direct-fit means an easier bolt-on install for you. Choose the perfect fit for your vehicle.
Features include:
• Stainless steel construction
• CNC-precision robotic manufacturing
• Limited 5-year/50,000 mile warranty
| Product Attributes | |
|---|---|
| Brand | MagnaFlow |
| Manufacturer's Part Number | 5582375 |
| Part Type | Catalytic Converters |
| UPC | 888563158952 |
| Inlet Quantity | 1 |
| Inlet Diameter (in.) | 2.25 in. |
| Converter Inlet Attachment | Slip fit |
| Outlet Quantity | 1 |
| Outlet Diameter (in.) | 2.25 in. |
| Converter Outlet Attachment | Slip fit |
| Converter Case Material | Stainless steel |
| Converter Substrate Material | Ceramic substrate |
| Converter Overall Length (in.) | 8.13 |
| Converter Style | 3-way |
| Remanufactured | No |
| AIR Tube | No |
| Heat Shield | No |
| Quantity | Sold individually. |
| CARB EO Number(s) | D-193-148 |
| Manufacturer Attributes | |
|---|---|
| Air Tube Count | 0 |
| Sensor Port Count | 0 |
| Inlet Quantity | 1 |
| Outlet Quantity | 1 |
| Inlet Inside Diameter | 2.25 |
| Outlet Inside Diameter | 2.25 |
| Body Height | 5 |
| Body Width | 5 |
| Body Length | 8.125 |
| Overall Length | 8.125 |
| Inlet Orientation | Angled |
| Substrate Material | Ceramic |
| Clamps Included | No |
| Hangers Included | No |
| Heat Shield Attached | No |
| Inlet Gasket Included | No |
| Inlet Mounting Hardware Included | No |
| Outlet Gasket Included | No |
| Outlet Mounting Hardware Included | No |
| Air Tube Adaptable | No |
| Body Shape | Round |
| Body Type | Spun |
| Finish | Stainless Steel |
| Tube Material | Stainless Steel |
| Body Material | Stainless Steel |
| Outlet Orientation | Straight |
| Universal Or Specific Fit | Universal |
| Inlet Type | Weld-On |
| Outlet Type | Weld-On |
| CARB Executive Order Number | D-193-148 |
| Product Class | Catalytic Converter |
| Product Outline | Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life Compact, lightweight construction enables installation in confined areas, welding is required Durable 308 stainless steel MIG welds |
| Vehicle Brief | Catalytic Converter |
Compatibility
Loading compatibility information...
Keep shopping
More from Magnaflow
