Turbo Back System

THE BEST BANG FOR YOUR BUCK - ARMOR LITE Series exhaust systems are a value option with the same fitment, performance and sound as the premium products from MBRP. Heavy-gauge Aluminized Steel tubing helps to resist dings and dents caused by debris under your vehicle. This material can be a great choice for you if you live in a dry climate that doesnt see much precipitation, or if youre looking for great sound on a budget. All of the tubing is mandrel bent for maximum exhaust flow. Mandrel bending ensures no rippling in the bends. The end result is that it gives you more fresh air inside your engines cylinders, allowing it to produce more power and improve vehicle performance and longevity. Part numbers ending in P and PLM carry a 1-year warranty. MBRP, Stand out from the crowd with a performance exhaust system that sounds great.

Additional Information

Armor Lite Turbo Back Exhaust System; 4 in.; Incl. 3.5 in. Turbo Down Pipe/Front Pipe/Ext. Pipe/Mid Pipe/Muffler Delete Pipe/Over Axle Pipe/Hardware; Single Side Exit; Aluminized;

Product Overview

Built from heavy duty aluminized steel our Performance Series exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series we back this line with a 1 Year Warranty.

*Built to Perform*
You count on your truck to handle whatever you need it to do. With MBRP performance exhaust you can make that happen with up to 18 more horsepower and 28 ft/lb more torque not to mention lower EGTs. More pulling power, improved throttle response, greater fuel efficiency, with an MBRP diesel performance exhaust you will be amazed at what your truck can do.

*Minimize Backpressure*
The secret to getting more out of your diesel engine is to give it lots of cool, clean air. The only way that you can get fresh air in is to get the hot air out. From the spiral louvered high flow muffler to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. Drop exhaust gas temperature by up to 200°F and set the stage for all the performance you want. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.

*Easy Installation*
MBRP systems are as much fun to install as to drive with on your truck. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box, no matter what configuration of truck you have.

*We're With You*
Here at MBRP we take "customer service" very personally. Need help finding the right system...finding a dealer...working through your install...we are here to help. Give us a call toll free at 888-636-7223.

*Sound & Style*
Performance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your pickup. With our new stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP.

These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.

• 2 Year Warranty
• Boosts Torque And Horsepower
• Built To Perform
• Can Improve Fuel Economy By 1-2 MPG
• Delivers A Rich mellow Exhaust Note
• Heavy Duty Aluminized Steel, Fully Sealed Tubing for Rust Resistance. Enhanced Flow. Bolt-on Installation. MBRP Signature Styling and Sound.
• Improved Throttle Response
• Installs With Common Hand Tools
• Minimize Back Pressure

Important Notice relating to US Domestic Market Trucks & Pickups

Many US-market trucks and pickups are available in multiple cab and bed-length configurations (e.g., Single Cab, Extended Cab, Double/Crew Cab, CrewMax, 5.5ft/6.5ft/8ft beds, etc.). Exhaust system fitment can vary between these chassis versions.

Where available, we list all compatible vehicles, cab types, and bed lengths in the product description. However, depending on your exact configuration, some systems may require optional extension/mid-pipes or minor modification for correct fitment.

Because of these variations, please carefully check your cab configuration and bed length before purchasing. If you are unsure, or if your vehicle has been modified, please reach out to a StreetFX agent.

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Details

Product Downloads

#	Document Type	Download
1.	Installation Instructions

Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.

Reference Information

Exhaust System, PLM Series, Turbo-Back, Steel, Passenger Side Exit, Aluminized, Dodge, 5.9L, Kit

MBRP's PLM Series exhaust systems feature a muffler delete pipe that takes the place of your muffler, providing the ultimate in exhaust flow and sound. By doing so, they increase both horsepower and torque and improve fuel economy. The systems are manufactured from heavy-duty steel pipe with an aluminized coating for maximum protection. Their specially designed 2-piece tailpipe and bolt-on hangers allow for a simple, straightforward installation. These PLM Series exhausts are available in a variety of sizes, styles, and configurations for fitment on specific vehicle applications.