Mishimoto
Mishimoto Dodge/Chrysler/Jeep Hemi 5.7L/6.1L/6.4L Racing Thermostat
misMMTS-JED-06L
Mishimoto 01-07 Mitsubishi Lancer Evolution 7/8/9 Race Intercooler Kit - Silver
Maximize the effect of your intercooler setup with the Mishimoto Mitsubishi Lancer Evolution 7/8/9 Intercooler Kit! This full kit includes the Mishimoto race intercooler as well as the Mishimoto upper and lower intercooler pipes and couplers. This kit provides a direct-fit unit and completely replaces the restrictive and inefficient factory setup. The Mishimoto intercooler utilizes a large, 3.5-inch thick bar-and-plate core that has been designed with a strategic core composition to provide optimal reductions in intake temperatures and minimal pressure loss. This kit will support vehicles from stock to 600 whp! Our 350 whp test vehicle showed an 8 whp / 10 wtq increase in power compared to the stock intercooler and the Mishimoto intercooler was able to reduce temperatures by 28 degrees Fahrenheit. Not only was this intercooler, kit designed with power and efficiency in mind, but our engineers also crafted smooth cast end tanks to promote proper air dispersion through the core, improved airflow, and exceptional durability. Low air intake temperatures are vital for maximum power output, tuning, and performance. Whether you are taking your Evo to the local rallycross or competing in a time-attack, lower temperatures will be beneficial. Mishimoto intercooler pipes are crafted from lightweight, mandrel-bent aluminum and eliminate restrictions in the factory piping, which allows for improved airflow and quicker turbocharger spool. The included silicone couplers provide improved heat and pressure tolerance and can handle all the boost you can throw at them. This kit is available with a silver or stealth black powder-coated intercooler finish for enhanced durability and protection against road debris. As with all our products, the Mishimoto Evolution Race Intercooler includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Complete intercooler kit engineered to reduce intake air temperatures for increased power and efficiency. Includes high-quality components for optimal airflow, improved throttle response, and a precise, easy installation.
2001-2002 Mitsubishi Lancer Evolution 2.0 Liter, 2003-2006 Mitsubishi Lancer Evolution 2.0 Liter W5M51-2, 2003-2006 Mitsubishi Lancer Evolution 2.0 Liter W5M51-2, 2005-2006 Mitsubishi Lancer Evolution MR 2.0 Liter W6MAA-1, 2005-2006 Mitsubishi Lancer Evolution RS 2.0 Liter W5M51-2, 2006 Mitsubishi Lancer Evolution SE 2.0 Liter W5M51-2
Intercooler Kit
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
| Alternate Part Number: | MINTEVO01KSL |
| CARB EO Number: | D-759 |
| Color: | Silver |
| Description: | Mitsubishi Lancer Evolution 7/8/9 Race Intercooler Kit |
| Finish: | Powder-Coat |
| Install Difficulty: | 3 |
| Installation Difficulty: | 3/5 |
| Material: | Aluminum |
| OptionLabel: | Silver |
| Part Number: | misMMINT-EVO-01KSL |
| Feature 1: | Direct-fit kit for the Mitsubishi Lancer Evolution 7/8/9 |
| Feature 2: | Large, 3.5-in thick bar-and-plate core with strategic core composition for optimal cooling and minimal pressure loss |
| Feature 3: | Provided 8 whp / 10 wtq and reduced intake temperatures by 28 F (16 C) compared to the stock cooler on a vehicle making 350 whp |
| Feature 4: | Provides efficient intake temperature reduction for vehicles from stock to 600 whp |
| Feature 5: | All-aluminum cast end tanks provide improved airflow, superior air dispersion through the core, and exceptional strength |
| Feature 6: | Lightweight, mandrel-bent, polished aluminum pipes eliminate restrictive bends in the stock piping for improved airflow |
| Feature 7: | Bead-rolled pipe ends prevent boost leaks and coupler disconnection |
| Feature 8: | Silicone couplers provide increased heat and pressure tolerance |
| Feature 9: | Available with a Sleek Silver or Stealth Black powder-coated finish |
| Feature 10: | Mishimoto Lifetime Warranty |
| TechSpec Applications: | 2001-2007 Lancer Evolution 7/8/9 GSR--2005-2007 Lancer Evolution 8/9 MR |
| TechSpec Chassis Codes: | CT9A |
| TechSpec Core Height (in): | 11.65 |
| TechSpec Core Length (in): | 22 |
| TechSpec Core Type: | Bar-and-Plate |
| TechSpec Engine Codes: | 4G63 |
| TechSpec Includes: | (1) Mishimoto Intercooler--(2) Upper Intercooler Pipes--(1) Lower Intercooler Pipe--(3) Upper Pipe Couplers--(2) Lower Pipe Couplers--(1) 3-in T-bolt Clamp--(8) 2.75-in T-bolt Clamps--(1) 2-in T-bolt Clamp--Mishimoto Lifetime Warranty |
| TechSpec Inlet (in): | 2.375 |
| TechSpec Note: | This intercooler can be used with stock or aftermarket intercooler pipes. This intercooler is not universal and has application specific mounting points. The upper intercooler pipes are not designed to work with the stock airbox. An aftermarket open element air filter is required to use with these upper intercooler pipes. |
| TechSpec Outlet (in): | 2.5 |
| TechSpec Overall Height (in): | 14.5 |
| TechSpec Overall Length (in): | 31.5 |
| TechSpec Overall Width (in): | 5.75 |
| TechSpec Weight (lbs): | 27 |
Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.
| Reference Data (Provide these details to our support team) | |
|---|---|
| Brand Name/s | Mishimoto |
| StreetFX SKU | misMMINT-EVO-01KSL |
| SFX Item ID | 4050124 |
| Accounting SKU | mis-MMINT-EVO-01KSL |
| Manufacturer SKU | MMINT-EVO-01KSL |
| Manufacturer UPC | 748354011746 |
| Alternative References | MIMMMINT-EVO-01KSL, MIO-MINTEVO01KSL, MMINT-EVO-01KSL |
Intercooler, Aluminum, Natural, Mitsubishi, 2.0L, Kit
Maximize your ride's performance with a Mishimoto intercooler! These high performance intercoolers significantly lower air intake temperatures, while safely increasing horsepower for small and large turbo applications. Constructed from 6061 aluminum and precision TIG-welded, Mishimoto intercoolers feature sleek styling in a choice of colors for the ultimate in good looks. Whether you want to show it off or go with the popular sleeper look, Mishimoto makes an intercooler to give your engine--and your style--a boost!
| Product Attributes | |
|---|---|
| Brand | Mishimoto |
| Manufacturer's Part Number | MMINT-EVO-01KSL |
| Part Type | Intercoolers |
| Product Line | Mishimoto Intercoolers |
| UPC | 748354011746 |
| Intercooler Core Type | Air-to-air |
| Intercooler Material | Aluminum |
| Intercooler Color | Natural |
| Intercooler Width Range (in.) | 31.00-31.99 in. |
| Intercooler Height Range (in.) | 14.00-14.99 in. |
| Intercooler Width (in.) | 31.50 in. |
| Intercooler Height (in.) | 14.50 in. |
| Intercooler Depth (in.) | 5.75 in. |
| Intercooler Inlet | Slip fit |
| Intercooler Inlet Size | 2.500 in. |
| Intercooler Outlet | Slip fit |
| Intercooler Outlet Size | 2.500 in. |
| Intercooler Mounting Brackets Included | Yes |
| Intercooler Pipe Included | Yes |
| Intercooler Pipe Material | Aluminum |
| Intercooler Pipe Color | Polished |
| Aftercooler Included | No |
| Aftercooler Remote Water Reservoir Included | No |
| Remote Mount Electric Water Pump Included | No |
| Quantity | Sold as a kit. |
Loading compatibility information...
Keep shopping
Mishimoto
misMMTS-JED-06L
Mishimoto
misMMTS-WRA-12V2