Oracle Jeep Wrangler JL/JT 7in. High Powered LED Headlights (Pair) - w/ BC1 Controller

Complete Package for adding High-Performance 7" LED Headlights to your Wrangler JL/Gladiator JT without any fabrication or cutting your factory wiring. This complete Plug-&-Play kit also features Vertical and Horizontal headlight adjustment so you can put the light on the road (where you need it) and not blind oncoming traffic. The Ultimate 7" LED replacement headlight option for the Wrangler JL/Gladiator JT. This rugged solid-state LED design is perfect for the Jeep owner looking for high-quality lighting for better night time visibility without overpaying. Installation is very easy with the included JL/JT-specific "Plug and Play" connectors. You can even choose optional colored Halos for even more customization! Note: DRL wire cannot be used as a power source - Tapping into Park Lights will give manual control over LED accessory during daytime driving - LED accessory will turn on automatically in night mode when switch is set to AUTO - For full automatic control over the LED accessory use fuse F52 in the engine compartment fuse panel.

Additional Information

ORACLE Lighting Jeep Wrangler JL/Gladiator JT 7in. High Powered LED Headlights (Pair) ColorSHIFT Halos w/BC2

Part Type

Headlight Assembly

Product Overview

Complete Package for adding High-Performance 7" LED Headlights to your Wrangler JL/Gladiator JT without any fabrication or cutting your factory wiring. This complete Plug-&-Play kit also features Vertical and Horizontal headlight adjustment so you can put the light on the road (where you need it) and not blind oncoming traffic. The Ultimate 7" LED replacement headlight option for the Wrangler JL/Gladiator JT. This rugged solid-state LED design is perfect for the Jeep owner looking for high-quality lighting for better night time visibility without overpaying. Installation is very easy with the included JL/JT-specific “Plug and Play” connectors. You can even choose optional colored Halos for even more customization! Note: DRL wire cannot be used as a power source - Tapping into Park Lights will give manual control over LED accessory during daytime driving - LED accessory will turn on automatically in night mode when switch is set to AUTO - For full automatic control over the LED accessory use fuse F52 in the engine compartment fuse panel.

• 2 Year Warranty
• Brighter/ More Even Light- by moving the heat load of the resistors off the PCB we are able to increase the number of LEDs on the circuit board without thermal issues.
• Color Temperature: 6000K (Cool White Color)
• Current Draw: 2.50 Amps @ 12V DC / 1.30 Amps @ 24V DC
• Die-Cast Housing with Corrosion Resistant Coating
• DOT and SAE Certified
• Easy Plug & Play Installation
• Hard-coated Polycarbonate Lens
• Heavy Duty Solid State Electronics
• High Beam Lumens: 3600 Lumens/4800 Raw Lumens
• High Beam Wattage: 40W Normal/48W Max
• Improvements in brightness and reliability by adding a constant current LED driver to the main circuit board inside of the lamp to control the LED halos.
• Increased Reliability- By conditioning the power going into the LEDs this prevents degradation which can shorten the overall lifespan of the product.
• Input Voltage of Halo (If Included): 12V DC
• Input Voltage of Light: 12-24V DC
• LED chips upgraded from a Cree LED to a Phillips Luxeon ZES chip.They deliver a very high efficacy 130LM/W ratio while having lower thermal output.
• Low Beam Lumens: 2200 Lumens/3600 Raw Lumens
• Low Beam Wattage: 30W Normal/36W Max
• Optional: ORACLE Halo Rings Pre-Installed
• Premium Performance Phillips Luxeon ZES LEDs
• Wide Beam Pattern with Sharp Cut-Off Line
• Wider Input Voltage Range- The new SMD Halos can operate on a very wide voltage range from 12V-24V so that voltage spikes can not damage the LEDs.

Vehicle Compatibility and Return Conditions.

This item was designed and engineered in the USA for US domestic vehicles. OBD tools, ECUs, dongles, programmers, and tuners may have limited compatibility with vehicles outside the USA due to regional differences in emission standards and system configurations. Some features and functionality may vary depending on the vehicle and location.

Some electronic tuning devices and programmers require activation, registration, or pairing with a specific vehicle’s VIN (Vehicle Identification Number). Once activated or paired, these devices may become permanently associated with that vehicle, restricting or preventing their use on another vehicle, resticting our ability to offer returns or exchanges.

Please review the product details and images to ensure it meets your needs. For clarification or assistance, feel free to contact a StreetFX agent. Note: Returns are not accepted for special order or tuning products unless the unit is deemed faulty.

Note for Australian & European Markets

This product is designed and tested for the US domestic market, and certain features may not be compatible with or compliant to regulations in other countries. For example, some lighting products may need modification to meet transportation standards or may not comply with local laws. References to SAE and DOT refer to US standards & requirements and may not be directly comparable to Australian requirements. For vehicles outside North America, lights may require modification by an auto electrician. Wiring, lamp colour, beam pattern, connectors, or relays may differ from those used in some North American models. Please review all images and descriptions carefully to ensure this product suits your requirements. Returns are not accepted for special-order products.

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Details

Reference Information