Rigid Industries 40in Adapt E-Series Light Bar
Rigid Industries 40in Adapt E-Series Light Bar
Description
Rigid Industries 40in Adapt E-Series Light Bar
The RIGID Adapt E-Series LED Light Bar features the same style and construction as RIGIDs legendary E-Series, from the high-strength aluminum heat sink to the unbreakable polycarbonate lens. On the inside, however, the Adapt E-Series contains cutting-edge technology. The Adapt E-Series takes off-road lighting performance to a whole new level with two layers of adaptive response to your vehicle and driving conditions. The first layer of adaptive response is RIGIDs new Active Power Management (APM) system which continuously monitors input voltage to determine the status of the vehicles electrical system. If the voltage is stable, the Adapt E-Series will continue to utilize all available power to give you the most output possible. If the available voltage to the light begins to drop due to insufficient power, RIGIDs APM system will gradually reduce the lights power consumption until the vehicles voltage stabilizes. The second layer of adaptive response featured in the Adapt E-Series is RIGIDs proven Active View Technology. This technology uses an internal GPS module to determine the vehicles speed, allowing the Adapt E-Series to properly distribute all available power among three unique optic zones. Utilizing the three zones allows the Active View Technology to create the most optimal beam pattern to suit the vehicles speed. As the vehicles speed changes, power is dynamically routed through various optics. Utilizing scene optics for low speed, driving optics for moderate speed and spot optics for high speed driving. Rather than cycling between pre-set modes, power is transferred gradually between optic zones showcasing the beam transitions. This allows for seamless transition between beam patterns offered in the Adapt E-Series making it easier than ever to Own The Night.
Additional Information
The RIGID Adapt E-Series uses Active Power Managementâ„¢ (APM) to prevent voltage drop and Active View Technologyâ„¢ with GPS to automatically adjust light across three optic zones (scene; driving; spot) based on vehicle speed.
Part Type
Exterior Multi-Purpose LED
Features
- 3 Optic Zones - Scene / Driving / Spot
- 9-36 VDC
- Active Power Managementâ„¢ System - Power Capacity Sensing
- Active View Technologyâ„¢ - Internal GPS Module
- Alloy Housing and Heatsink
- Harness / Switch / Relay Included
- Limited Lifetime Warranty
- Seamless Beam Transition
- Slow Speed / Moderate Speed / High Speed Beam Patterns
- Two Layers Of Adaptive Response
- Universal Fit / Fits All Existing E-Series Grilles And Mounts
- Use In Adapt Mode Or All On
Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.
Specifications
Product Downloads
Installation guides, warranty details, and other supporting documents are provided by the supplier. In some cases, these files may originate from regions outside your locale, meaning instructions, warranty procedures, and images may not fully align with your specific vehicle or region (e.g., LHD vs. RHD differences, return policies, etc.). If you need clarification, please contact a StreetFX support agent.
Reference Information
| Reference Data (Provide these details to our support team) | |
|---|---|
| Brand Name/s | Rigid Industries |
| StreetFX SKU | rig280413 |
| SFX Item ID | 4416716 |
| Accounting SKU | rig-280413 |
| Manufacturer SKU | 280413 |
| Manufacturer UPC | 849774033162 |
| Alternative References | 280413, RGD-280413 |
LED Light Bar, Adapt E-Series, 40 in, Rectangular, Aluminum Housing, Black, 231 Watts, 29,920 Lumens, Each
Rigid Industries Adapt E-Series LED light bars feature the same style and construction as Rigid's legendary E-Series, from the high-strength aluminum heatsink to the unbreakable polycarbonate lens. On the inside, however, the Adapt E-Series contains cutting-edge technology as the world's first autonomous off-road light bars! These light bars feature both an Active Power Management system (power capacity sensing) and Active View Technology (internal GPS module). Take off-road lighting performance to a whole new level with the Adapt E-series LED light bars.
Items, features, and specs:
• Available in 20, 30, 40, and 50 in. sizes
• Fits all existing E-Series grilles, mounts, and light covers
• Wire harness, switch, and relay
• Stainless steel mounting brackets
• Hardware kit
• Pressure-equalizing vent
• Black exposed printed circuit board
• Patented optics
• Seamless beam transition
• Three optic zones (scene, driving, or spot)
• Lights auto-adjust their beams to your speed (slow, moderate, or high)
• Use in Adapt Mode or all on
• 50,000 hours-plus LED lifespan
• 9-36 V DC
• Limited manufacturer lifetime warranty
• Off-road use only
• Installation instructions
| Product Attributes | |
|---|---|
| UPC | 849774033162 |
| Brand | Rigid Industries |
| Notes | Adaptive light bar with three optic zones (scene, driving, spot), Active View Technology (internal GPS) and Active Power Management. |
| Watts | 231.0 watts |
| Lumens | 29,920 |
| Quantity | Sold individually. |
| Bulb Type | LED |
| Part Type | Light Bars, Light Pods and Fog Lights |
| Bulb Color | White |
| Lens Color | Clear |
| Light Type | Light bar |
| Optics Style | Spot |
| Product Line | Rigid Industries Adapt E-Series LED Light Bars |
| Beam Distance | 862.00 m |
| Housing Color | Black |
| Light Bar Type | Straight dual row |
| Relay Included | Yes |
| Maximum Voltage | 36 V |
| Housing Material | Aluminum |
| Hardware Included | Yes |
| Light Bar Size (in.) | 40 in. |
| Light Cover Included | No |
| Wiring Harness Included | Yes |
| Manufacturer's Part Number | 280413 |
| Manufacturer Attributes | |
|---|---|
| C = Beam Distance with .25 LUX | 1,723 |
| Product Weight | 10.84 |
| Zone 1 Horizontal Field beam angle | 101.6 |
| Add-On | 11001, 11002, 11003, 11008, 46590, 1063, 1067, 1031, 30130, 30140, 30150 |
| Zone 2 Amp Draw | 13.5 |
| Zone 1 C | 145.4 |
| Zone 3 Vertical Field beam angle | 15.9 |
| Zone 2 Peak CD | 158,027 |
| Zone 2 A | 1580.27 |
| Field Vertical (Measured in Degrees) | 16 |
| Zone 3 Amp Draw | 16.5 |
| Field Horizontal (Measured in Degrees) | 17 |
| Zone 3 Horizontal Field beam angle | 17.5 |
| Zone 3 C | 1723.3 |
| Zone 2 Watts | 189 |
| Watts | 231 |
| Zone 3 Watts | 231 |
| Zone 2 Vertical Field beam angle | 24.4 |
| Zone 2 Raw Lm | 25,520 |
| Raw Lumens | 29,920 |
| Zone 3 Raw Lm | 29,920 |
| Zone 2 B | 397.5 |
| Zone 2 LED's count | 40 |
| Zone 3 LED's count | 40 |
| Size | 40 in. |
| Zone 1 Peak CD | 5,285 |
| Zone 2 Horizontal Field beam angle | 50.6 |
| Zone 1 A | 52.85 |
| Zone 1 Amp Draw | 6.3 |
| A = LUX at 10 Meters | 7,425 |
| Zone 1 B | 72.7 |
| Peak Beam Intensity (cd) | 742,460 |
| Zone 3 Peak CD | 742,460 |
| Zone 3 A | 7424.6 |
| Zone 2 C | 795.1 |
| Zone 1 LED's count | 8 |
| Zone 1 Raw Lm | 8,641 |
| Zone 3 B | 861.7 |
| B = Beam Distance with 1 LUX | 862 |
| Number of LED's | 88 |
| Zone 1 Watts | 88 |
| Zone 1 Vertical Field beam angle | 96.4 |
| Product Family | Adapt |
| ASIN | No |
| Title | RIGID Adapt E-Series LED Light Bar With 3 Lighting Zones And GPS Module, 40 Inch |
| What's In The Package | Stainless Steel Mounting Brackets, Hardware Kit, Wire Harness, Relay, Switch, Install Instructions |
| test series | Universal Fit |
| Manufacturer Designation | Adapt E-Series LED Light Bar With 3 Lighting Zones And GPS Module, 40 Inch |
| Product Class | Exterior Multi-Purpose LED |
| Construction/Type | Adapt E-Series LED Light Bar With 3 Lighting Zones And GPS Module, 40 Inch |
| Product Outline | Use In Adapt Mode Or All On |
| Vehicle Brief | Rigid - 280413 - LED LIGHT |
| Market Description | The RIGID Adapt E-Series LED Light Bar features the same style and construction as RIGIDs legendary E-Series, from the high-strength aluminum heat sink to the unbreakable polycarbonate lens. On the inside, however, the Adapt E-Series contains cutting-edge technology. The Adapt E-Series takes off-road lighting performance to a whole new level with two layers of adaptive response to your vehicle and driving conditions. |
Compatibility
Loading compatibility information...
Keep shopping
More from Rigid Industries
Rigid Industries
Rigid Industries A-Series Light - Black - High Strength - Natural White
rig480083
Rigid Industries
Rigid Industries 28in Chase Light Bar Universal - Rear Facing 27 Mode 5 Color LED Light Bar
rig901802

