Steering Knuckle

RockJocks High Steer Knuckles for JL Wrangler, JL Unlimited and JT Gladiator vehicles are a game changer! Simply installing these knuckles raises your tie rod 2 3/4 in. and your drag link 2 1/2 in.! These knuckles, for use on factory axles or axles that retain factory inner C-knuckles, are intended for use with RockJocks other high steer components, to give you a package that provides all the necessary components to accommodate the higher steering location, adjust all geometry points and allow you to easily install a hydraulic assist steering ram, or to reinstall your stabilizer shock! Knuckles are manufactured to greater than OEM standards in every way. Features include premium iron castings, gloss black finish and precise machining for a component that installs just like factory. Additionally, provided are extra threaded steering stop bolt holes ahead of the axle to allow for a second set of stops to be added, giving you firm steering lock stops on both wheels at all times, easing strain on other components. For best results, it is highly recommended that these knuckles be used in conjunction with one of RockJocks knuckle kits that include all of the other components to make this installation easy. Their RJ-440000-101 kit includes a forged, high articulation Drag Link, a 42mm chromoly Tie Rod, as well as the bracket and clamp kits to allow you to install a hydraulic assist steering ram. They also offer their RJ-440001-101 kit that includes the same Drag Link and Tie Rod, as well as the bracket and clamp kits to allow you to reinstall your steering stabilizer shock at a much higher, protected height. Additionally, the use of their RJ-9120FJLF forged, organically shaped front trac bar is highly recommend, so that all components nest together for maximum up travel as engineered.

Additional Information

Currectlync® High Steer Knuckle Set; High Steer Outer Steering Knuckles Raise Tie Rod 2.75 in.; Drag Link 2.5 in.;

• High Steer Components

This item is available as a full kit.
Select a kit option in the following table if you are looking for this item in a bundle form with all associated components.

Kit option/s:

Thumb	SKU	Kit Title
	rokRJ-440000-101	RockJock JL/JT Currectlync High Steer kit for Ram Assist. w/ Knuckles Drag link, Tie Rod, Hardware (1x rokRJ-442101-101, 1x rokRJ-447100-101, 1x rokRJ-441109-103, 1x rokRJ-442103-101, 1x rokRJ-441001-101)
	rokRJ-440001-101	RockJock JL/JT Currectlync High Steer Kit for Stabilizer Shock w/ Hardware (1x rokRJ-442101-101, 1x rokRJ-441110-101, 1x rokRJ-441002-101, 1x rokRJ-447100-101, 1x rokRJ-442103-101)
	rokRJ-440000-103	RockJock Currectlync JL/JT High Steer Kit for Ram Assist and Non-Rubicon Axle (1x rokRJ-442101-101, 1x rokRJ-447100-101, 1x rokRJ-441109-103, 1x rokRJ-442103-101, 1x rokRJ-441001-101)
	rokRJ-440001-103	RockJock Currectlync JL/JT High Steer Kit for Stabilizer Shock and Non-Rubicon Axle (1x rokRJ-442101-101, 1x rokRJ-441110-101, 1x rokRJ-441002-101, 1x rokRJ-447100-101, 1x rokRJ-442103-101)

Note for Australian and European Markets

Unless otherwise stated, this product may be engineered for use in Left-Hand Drive vehicles. Steering components, pedals, shifters, linkages, wing mirrors, instrument clusters, panhard rods/traction bars, drag links, brake boosters, brake or clutch lines, accelerator cables, heater cores, some master cylinders and adjacent parts can vary between LHD and RHD configurations. In some models compenents such as windscreen wiper arms, motors and linkages could differ in their size and orientation. Items such as floor mats & dash mats may have differences in their structure around the front row (or padding in different locations). In many cases items are identical depending on the design of the vehicle and part, but may have differing mounts, lengths or bolt patterns. Carefully review the product images and details to ensure suitability for your vehicle, or contact StreetFX support if you are unsure. Returns are not accepted for special order products.

Note for Pistons, Rings, Rotors, Rods and engine internals

Unless otherwise specified, some brands supply brake rotors, pistons, strut mounts, rods and rings separately. In some cases, titles may indicate plural, or 'set' - eg the term “ring set” often refers to the rings for a single piston only. If you’re unsure about what’s included with this product, please contact our team for clarification.

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Reference Information

Steering Knuckles, High Steer, Cast Iron, Natural, Jeep, Pair

Rock Jock high steer knuckles for all Jeep JL and JT models are a game changer! Simply installing these knuckles raises your tie rod 2 3/4 in. and your drag link 2 1/2 in.! They're designed for use on factory axles or axles that retain factory inner "C" knuckles. The knuckles are intended for use with Rock Jock's other high steer components—to give you a package that provides all the necessary components to accommodate the higher steering location, adjusts all geometry points, and allows you to easily install a hydraulic assist steering ram (or to reinstall your stabilizer shock).

Rock Jock knuckles are manufactured to greater-than-OEM standards in every way. Features include premium iron castings, gloss black finish, and precise machining for a component that installs just like factory. Additionally, engineers provided extra threaded steering stop bolt holes ahead of the axle to allow for a second set of stops to be added, giving you firm steering lock stops on both wheels at all times, easing strain on other components.

Kit Includes:
• Left side high steer steering knuckle
• Right side high steer steering knuckle

Fitment Specs.:
• For use on any factory JL or JT front differential, or any aftermarket replacement axle that features factory specification inner "C" knuckles
• Retains factory unit bearings, axle shafts, ball joints, steering stop bolts and brakes with dust shields
• Intended to be used with a minimum of a 17 in. diameter wheel and up to a 6 in. wheel backspacing
• A minimum of a 2.2 in. bump stop extension is mandatory to keep components from crashing under full articulation range conditions