Front Sway Bar - 24mm Heavy Duty (Holden HK, HT, HG 67-71)
SKU: BHF6
$285.00
or 4 payments of $71.25 with Info
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $35.68 fortnightly and receive your order now. More info
RockJocks forged narrow Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 left hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
This product is designed and tested for the US Domestic Market to comply with relevant US standards. Consequently, it may have features that are not compatible or compliant with regulations outside the US. As such, this item is offered for off-road use. Please contact a Support agent for more information if required.
Narrow Forged Johnny Joint®; 2.5 in. Forged Joint; w/1 1/4 in. Left Hand Threaded Stud;
Rock Jock Johnny Joint rod ends offer 30 degrees (up to 40 degrees on some units) of unrestricted movement in any direction, as compared to 22 degrees on common Heim joints. They come with high-density "tough 88" urethane bushings that are very durable and impervious to weather. Higher density, one-piece bushings are used in narrow-bodied joints to handle heavy load applications, such as traction bars. All Johnny Joints are greasable for long-lasting durability and quiet operation—and are fully rebuildable.
Johnny Joints are available in a variety of sizes with a nearly infinite range of narrow and wide-style configurations, including:
UPC | 810038152394 |
Brand | Rock Jock |
Quantity | Sold individually. |
Part Type | Rod Ends |
Heat-Treated | Yes |
Product Line | Rock Jock Johnny Joint Rod Ends |
Rod End Style | Solid |
Grease Fitting | Yes |
Rod End Finish | Zinc plated |
Jam Nut Included | No |
Rod End Material | Forged steel |
Rod End Attachment | Male threads |
Rod End Ball Width | 2.625 in. |
Rod End Thread Size | 1 1/4 in.-12 LH |
Rod End Construction | 1-piece |
Rod End Head Diameter | 2.500 in. |
Rod End Head Bore Size | 0.563 in. |
Summit Racing Part Number | RKJ-CE-9114NL |
Manufacturer's Part Number | CE-9114NL |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
RockJocks forged narrow Johnny Joints(R) for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint(R) rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2 1/4 in. of 1 1/4 in.-12 left hand threads on the shank, and a 2.625 in. mounting width ball with a .562 in. thru bolt hole. Finished in gold zinc plating.
This product is designed and tested for the US Domestic Market to comply with relevant US standards. Consequently, it may have features that are not compatible or compliant with regulations outside the US. As such, this item is offered for off-road use. Please contact a Support agent for more information if required.
Narrow Forged Johnny Joint®; 2.5 in. Forged Joint; w/1 1/4 in. Left Hand Threaded Stud;
Rock Jock Johnny Joint rod ends offer 30 degrees (up to 40 degrees on some units) of unrestricted movement in any direction, as compared to 22 degrees on common Heim joints. They come with high-density "tough 88" urethane bushings that are very durable and impervious to weather. Higher density, one-piece bushings are used in narrow-bodied joints to handle heavy load applications, such as traction bars. All Johnny Joints are greasable for long-lasting durability and quiet operation—and are fully rebuildable.
Johnny Joints are available in a variety of sizes with a nearly infinite range of narrow and wide-style configurations, including:
UPC | 810038152394 |
Brand | Rock Jock |
Quantity | Sold individually. |
Part Type | Rod Ends |
Heat-Treated | Yes |
Product Line | Rock Jock Johnny Joint Rod Ends |
Rod End Style | Solid |
Grease Fitting | Yes |
Rod End Finish | Zinc plated |
Jam Nut Included | No |
Rod End Material | Forged steel |
Rod End Attachment | Male threads |
Rod End Ball Width | 2.625 in. |
Rod End Thread Size | 1 1/4 in.-12 LH |
Rod End Construction | 1-piece |
Rod End Head Diameter | 2.500 in. |
Rod End Head Bore Size | 0.563 in. |
Summit Racing Part Number | RKJ-CE-9114NL |
Manufacturer's Part Number | CE-9114NL |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
Front Sway Bar - 24mm Heavy Duty (Holden HK, HT, HG 67-71)
SKU: BHF6
$285.00
or 4 payments of $71.25 with Info
Spring - Pad Lower/Upper Bushing (Ford inc BA-BF, FG, Territ
SKU: W72718
$34.00
or 4 payments of $8.50 with Info
Sway Bar Mount Bush Kit 16mm - Rear (Camry/Corolla/Sprinter)
SKU: SPF0199-16K
$34.55
or 4 payments of $8.64 with Info
Eccentric Lockout Kit (FR-S/BRZ/WRX EL FRS)
SKU: SPL-EL-FRS
$132.35
or 4 payments of $33.09 with Info