Skunk2 07-11 Honda Civic Si Big-Bore Throttle Body Cold-Air Intake Coupler (84mm to 90mm)

Skunk2s 84mm - 90mm Big-Bore Throttle Body Cold-Air Intake Coupler allows for easy installation of Skunk2s '06-'11 Civic Si Cold-Air Intake when using a Pro Series Throttle Body or similar (also compatible with OEM TL throttle body). Simply replace the Cold-Air Intake systems included silicone coupler with Skunk2s 84mm - 90mm version for a simple, factory-like fit.

Additional Information

Throttle Body Cold Air Intake Coupler; 84-90mm TB Opening;

Product Overview

Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the ’06-’11 Civic Si. The results are the best performing, best fitting intake system available.

Skunk2’s Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5-inch internal diameter lower tube and a tapered, 3.5-inch to 3.0-inch internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connectors for use with Skunk2 throttle bodies or similar sold separately). The two piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition between the two tubes is also included for vehicles equipped with aftermarket engine management systems that don’t utilize MAF sensors.

In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2’s design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors’ designs that locate the air filter from the side. That, combined with a design that doesn’t require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions.

Each Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless steel clamps and mounting hardware. Unlike other intake systems, only Skunk2’s unique design and brackets allow for the OEM battery to be retained. A specially shaped, silicone upper radiator hose is also included with each kit to ensure maximum clearance for the intake tubing and proper fitment.

Skunk2 developed its unique Cold-Air Intake system in 2009 for back-to-back Grand-Am champions and racing partners Compass360 Racing. Now that the team is retiring its eighth-generation Civic race cars, we can finally release this race-proven technology to enthusiasts.

These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.

• 84-90mm TB Opening
• Skunk2 Throttle Cold Intake-Coupler

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Details

Reference Information

Service Items, Cold Air Intake Silicone CouplerBlack 3-IN to 3 IN