Skunk2 12-13 Honda Civic Si Composite Cold Air Intake

Through its technical partnership with the championship-winning Compass360 Racing team, engineers at Skunk2 have developed an all new cold air intake system for the 12-15 Honda Civic Si. The results are the best performing, best fitting intake system netting +6whp and +8lbs-ft of torque. Skunk2's Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5- in. internal diameter lower tube and a tapered, 3.5- in. to 3.0- in. internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connectors for use with Skunk2 throttle bodies or similar sold separately). In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2's design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors' designs that locate the air filter from the side. That, combined with a design that doesn't require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions. Unlike other intake systems, only Skunk2's unique design and brackets allow for the OEM battery to be retained.

Additional Information

Cold Air Intake Kit; Incl. Air Filter/Tubing/Relocation Hardware For Battery; Retains OEM Battery;

Product Overview

Skunk2 drew upon its experience and longstanding technical partnership with championship-winning Compass360 Racing when developing its all-new Cold-Air Intake for the ’06-’11 Civic Si. The results are the best performing, best fitting intake system available.

Skunk2’s Cold-Air Intake is manufactured from molded polymer plastic for superior intake air insulation when compared to aluminum as well as for a smooth, continuous taper. When compared to aluminum, the thicker polymer material results in a superior thermal barrier and lower intake air temperatures. Each kit includes a 3.5-inch internal diameter lower tube and a tapered, 3.5-inch to 3.0-inch internal diameter upper tube that connects to the factory throttle body with a high-quality, silicone connector (larger diameter connectors for use with Skunk2 throttle bodies or similar sold separately). The two piece design and supplied MAF sensor adapter allows for compatibility with vehicles utilizing the factory ECU. A silicone coupler featuring a smooth, tapered transition between the two tubes is also included for vehicles equipped with aftermarket engine management systems that don’t utilize MAF sensors.

In an effort to reduce the possibility of submerging the air filter during wet conditions, Skunk2’s design positions the air filter downward-facing for approximately two inches of additional ground clearance when compared to competitors’ designs that locate the air filter from the side. That, combined with a design that doesn’t require cutting or modifying the factory fender liners, greatly reduces the chances of water entering the intake during wet conditions.

Each Cold-Air Intake kit includes relocation hardware for the battery, ECU, fuse box, and cooling system reservoir tank as well as high-quality stainless steel clamps and mounting hardware. Unlike other intake systems, only Skunk2’s unique design and brackets allow for the OEM battery to be retained. A specially shaped, silicone upper radiator hose is also included with each kit to ensure maximum clearance for the intake tubing and proper fitment.

Skunk2 developed its unique Cold-Air Intake system in 2009 for back-to-back Grand-Am champions and racing partners Compass360 Racing. Now that the team is retiring its eighth-generation Civic race cars, we can finally release this race-proven technology to enthusiasts.

These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.

• 3.5 in. ID Lower Tube
• 3.5 in. To 3.0 in. ID Upper Tube
• Allows For OEM Battery to be retained
• Connects To Factory Throttle Body
• Manufactured From Molded Polymer Plastic

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Details

Reference Information

Cold Air Intake, Polymer Cold Air Intake System 12-15 Honda Civic Si

Skunk2's cold air intakes raise the bar for the kind of performance you can expect from an intake upgrade. Skunk2 started with a clean sheet design and used all of their performance and engineering know-how to design these revolutionary cold air intakes, which are manufactured from molded polymer plastic for superior intake air insulation compared to aluminum. The intake tube also has a smooth, continuous taper which greatly increases incoming air velocity. The thick polymer material also produces a superior thermal barrier for significantly lower intake air temperatures and drastically reduced heat soak issues that are common in other intakes. These cold air intakes use a massive 6.8 in. diameter double cone filter element, which will allows for larger dust holding capacities. Order the cold air intake designed for your application needs.