Skunk2 Pro Series Plus 96-00 Honda Civic Adjustable Front Camber Kits (+/- 4 Degrees)

Skunk2 designed its Pro Series Plus Front Camber Kit for the '96-'00 Civic with specially engineered A-arms and ball joints that allow for maximum positive camber adjustment in a low-profile design. Enthusiasts who are serious about performance can now correct almost all abnormal tire wear due to negative camber and increase high-speed stability. Each Pro Series Plus Camber Kit includes three-piece, low-deflection, polyurethane bushings that eliminate the pre-load typically associated with rubber bushings, allowing the arms to pivot freely, dramatically improving handling performance. Pro Series Plus Camber Kits also feature Skunk2's all-new, one-piece, forged Pro Series Ball Joints, which feature low-profile top plates for additional clearance between themselves and the shock towers, higher clamping loads for no-slip performance, and a unique design that allows for maximum adjustability. Skunk2 ‘s cadmium-plated, Pro Series Ball Joints can also be adjusted from the bottom up, which allows for quicker and easier adjustments—especially on lowered vehicles with shortened shock bodies. In addition to improved ride characteristics and reduced tire wear on lowered vehicles, Skunk2s proprietary design helps reduce structural fatigue and failure commonly associated with other camber adjustment kits. Skunk2's Camber Kits are the number one choice of many professional race teams, including Honda's own factory road race cars, since 1997. And since 1995, Skunk2 has been leading the industry with its fully adjustable Camber Kits. To accommodate enthusiasts' needs, Skunk2 made a significant change in 1998 by adding an oversized, rectangular-shaped top mount to its Front Camber Kits for increased positive adjustment. In 2000, Skunk2 pioneered the use of one-piece, forged ball joints. And in 2004, Skunk2 introduced its patent-pending Pro Series Ball Joints—a design that, today, sets the standard for all other camber kits.

Additional Information

Pro Plus Series Front Camber Kit; Adjusts +/- 4 Degrees; Incl. Polyurethane Bushings/Upgraded Pro Series Ball Joint w/Bottom Adjustment; Set of 2;

Product Overview

Skunk2 has been making and selling camber kits since 1995. To accommodate the needs of the market, a significant change was made in 1998 by adding an oversized rectangular shaped top mount for increased positive camber adjustment. In 2000 we pioneered the use of a one-piece forged ball joint. And in 2004 the [patent pending] Pro-Series ball joint was introduced. Today this same design has become the industry reference standard. The Skunk2 Camber Kits are the number one choice of many pro racing teams and have been on Honda Factory road race cars since 1997. By replacing your factory upper control arms with Skunk2 camber kits, you gain the ability to correct negative camber that results from lowering your vehicle. Skunk2 front camber kits allow tuners to accurately dial in their suspension settings utilizing quick adjustment sliding ball joints. With over +/- 3 degrees of adjustment our camber kits can minimize the effects of negative camber, help reduce abnormal tire wear, and increase stability at high speeds. Skunk2 camber kits are ideal for race or street applications. Available in Pro-Series Plus, Pro-Series, and Tuner Series.

PRO-SERIES PLUS
This is Skunk2's flagship camber kit for enthusiasts that are serious about performance. Each camber kit comes with Skunk2's one-piece forged [patent pending] Pro-Series balljoint. The Pro-Series balljoint features a low profile top plate for additional clearance and higher clamping loads for no-slip performance; and can quickly be adjusted from the bottom-up. The Pro-Plus camber kit also includes 3-piece low-deflection polyurethane bushings that dramatically improve handling response, feel, and performance.

PRO-SERIES
This is recommended as a good entry-level camber kit. The Pro-Series camber kit features the same one-piece forged Pro-Series balljoint used in the Pro-Plus kit, but instead of polyurethane bushings, the Pro uses standard high quality rubber bushings. Though the Pro kit is slightly more expensive than the Tuner series, the benefits and convenience offered by the Pro-Series ball joint provide excellent value.

TUNERSERIES
For the budget minded enthusiast there's the Tuner Series; which is the same classic design that Skunk2 has been offering to enthusiasts for over a decade. Each arm includes standard one-piece forged ball joint, and uses standard rubber bushings. The Tuner series also includes [patent pending] “square” washer plate for improved clamping performance and durability. Not only does the Tuner Series offer more features and superior quality over “clone” camber kits, it is also competitively priced.

PRO-SERIES ANCHOR KIT
Skunk2's replacement Pro Series Plus Front Camber Kit Mounting Anchors are now available separately. Recondition older Pro Series Plus Front Camber Kits to like-new condition or easily convert any Tuner Series or Pro Series Front Camber Kit to Pro Series Plus.

Pro Series Plus Front Camber Kit Mounting Anchors are compatible with Skunk2’s '92-'95 Civic and '94-'01 Integra Tuner Series, Pro Series, and Pro Series Plus Front Camber Kits. Each kit includes Skunk2’s redesigned, low-deflection, polyurethane bushings for ultimate control and performance.

Genuine Skunk2 polyurethane bushings act as bearings for quicker response and a more positive feel when compared to other manufacturers' bushings. Tearing and unseating problems normally associated with other fixed rubber bushings are eliminated by allowing the arm to rotate freely about the bushings. Special, radius-cut backsides also promote bushing longevity and help avoid tearing and unseating.

These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.

• Set of 2
• Sold In Pairs
• US Patent No. 8267413B1

Images are supplied by the manufacturer and may be generic. While all efforts are made to provide accurate pictures, there may be differences in the actual product, such as colour, quantity, version, or included components. Please carefully review the description and specifications for details on inclusions or any variations. Some items may be sold individually or in sets, and images may occasionally depict additional products or quantities not included in your purchase. For assistance or clarification, please contact customer support.

Product Details

Reference Information

Camber Kits, Pro Series Plus Front Camber Kit Red 96-00 Honda Civic EK

Skunk2 Racing Pro Plus camber kits are for enthusiasts who are serious about performance. They are designed to correct almost all abnormal tire wear due to negative camber and increase high-speed stability. Pro Plus camber kits include three-piece, low-deflection, polyurethane bushings that eliminate the pre-load typically associated with rubber bushings, allowing the arms to pivot freely, dramatically improving handling performance. Pro Series Plus camber kits also feature heavy-duty mounting anchors and Skunk2's all-new, one-piece, forged Pro Series ball joints.