Banks Power 13-18 Ram 6.7L Monster-Ram Intake System Gen-2 w
SKU: gbe42798
$1,783.51
or 4 payments of $445.88 with Info
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $445.88 fortnightly and receive your order now. More info
Key Features
What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater and Billet Intake Plate compared to stock's 38.6 lbs/min MAF.
Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.
The complete system
Banks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.
How it was designed
Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.
Expandable
With four 1/8” NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition.
Beats the competition
Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.
Banks Power Monster-Ram intake elbows may look unassuming, but these simple, direct-replacement elbows provide instant power, performance, and acceleration gains! Designed to improve airflow from the intercooler, these air inlets raise boost without increasing backpressure at the turbine. Banks used the latest in electronic computational fluid-dynamic technology to create a larger, less restrictive design than the stock intake. Simply put, Monster-Ram intake elbows allow for a greater flow of oxygen-rich, cooler, denser air into your cylinders for instant torque, responsiveness, and greater fuel economy! Banks Monster-Ram intake elbows provide up to six ports for water, methanol, propane, and nitrous injection, or pressure/temperature sensors—the possibilities are unmatched for performance expandability. Tested on the flow bench, and dyno and real-world proven, Banks Monster-Ram intake elbows unleash the free-breathing power that your engine is craving! Order the model designed for your vehicle application.
UPC | 801279427983 |
Brand | Banks Power |
Quantity | Sold as a kit. |
Emissions | California EO Approved |
Part Type | Throttle Body Intake Elbows |
Product Line | Banks Power Monster-Ram Intake Elbows |
CARB EO Number(s) | D-161-143 |
Intake Elbow Type | Elbow |
Intake Elbow Color | Natural |
Intake Elbow Material | Aluminum |
Throttle Body Bore Size | 86mm |
Summit Racing Part Number | GBE-42798 |
Manufacturer's Part Number | 42798 |
Compatibility & Application Information | |
---|---|
Universal | No |
Make | RAM |
Model | 2500 |
Submodel | BIG HORN |
Beginning Year | 2013 |
Ending Year | 2018 |
Engine Type | L6 |
Engine Size | 6.7L/408 |
Engine Family | Cummins diesel inline 6-cylinder |
Intake Elbow Mounting Flange | Stock |
Throttle Body Mounting Flange (application) | Stock |
Universal | No |
Make | RAM |
Model | 2500 |
Submodel | LARAMIE |
Beginning Year | 2013 |
Ending Year | 2018 |
Engine Type | L6 |
Engine Size | 6.7L/408 |
Engine Family | Cummins diesel inline 6-cylinder |
Intake Elbow Mounting Flange | Stock |
Throttle Body Mounting Flange (application) | Stock |
Universal | No |
Make | RAM |
Model | 2500 |
Submodel | LARAMIE LIMITED |
Beginning Year | 2014 |
Ending Year | 2015 |
Engine Type | L6 |
Engine Size | 6.7L/408 |
Engine Family | Cummins diesel inline 6-cylinder |
Intake Elbow Mounting Flange | Stock |
Throttle Body Mounting Flange (application) | Stock |
Universal | No |
Make | RAM |
Model | 2500 |
Submodel | LARAMIE LONGHORN |
Beginning Year | 2013 |
Ending Year | 2018 |
Engine Type | L6 |
Engine Size | 6.7L/408 |
Engine Family | Cummins diesel inline 6-cylinder |
Intake Elbow Mounting Flange | Stock |
Throttle Body Mounting Flange (application) | Stock |
Universal | No |
Make | RAM |
Model | 2500 |
Submodel | LIMITED |
Beginning Year | 2016 |
Ending Year | 2018 |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
Key Features
What it does
The Monster-Ram improves airflow from the intercooler. It flows 72.7 lbs/min MAF (Mass Air Flow) with Banks’ High-Flow Heater and Billet Intake Plate compared to stock's 38.6 lbs/min MAF.
Monster-Ram raises boost without increasing backpressure at the turbine. The result is a more responsive, power-efficient engine that offers even more headroom than stock for higher horsepower applications.
The complete system
Banks’ High-Flow Heater and Billet Intake Plate complete the perfect system. The High-Flow Heater allows for the removal of the restrictive stock heater grid plate. The new vertical coil-style heater provides the same functionality for cold starts as the stock grid heater but without obstructing airflow. Replacing the restrictive stock grid heater plate with the Banks High-Flow Intake Plate removes all obstructions and turbulence in the airflow path.
How it was designed
Utilizing the latest in CFD (computational fluid-dynamics), tested on the flow bench, the dyno, and on-road, Monster-Ram is a beast that only Banks could have unleashed. A direct-replacement aluminum casting, Monster-Ram is instant power, performance, and acceleration gratification. The factory inlet elbow is cramped and angular in order to accommodate the path of the stock No. 1 fuel line. Banks Engineers designed a new No. 1 fuel line, allowing the Monster-Ram to flow more air without obstruction.
Expandable
With four 1/8” NPT ports, perfect for temperature and pressure sensors, the sky's the limit for data acquisition.
Beats the competition
Like all Banks products, the Monster-Ram was tested against all available competitors. It more than doubles the improvement over the closest competitor.
Banks Power Monster-Ram intake elbows may look unassuming, but these simple, direct-replacement elbows provide instant power, performance, and acceleration gains! Designed to improve airflow from the intercooler, these air inlets raise boost without increasing backpressure at the turbine. Banks used the latest in electronic computational fluid-dynamic technology to create a larger, less restrictive design than the stock intake. Simply put, Monster-Ram intake elbows allow for a greater flow of oxygen-rich, cooler, denser air into your cylinders for instant torque, responsiveness, and greater fuel economy! Banks Monster-Ram intake elbows provide up to six ports for water, methanol, propane, and nitrous injection, or pressure/temperature sensors—the possibilities are unmatched for performance expandability. Tested on the flow bench, and dyno and real-world proven, Banks Monster-Ram intake elbows unleash the free-breathing power that your engine is craving! Order the model designed for your vehicle application.
UPC | 801279427983 |
Brand | Banks Power |
Quantity | Sold as a kit. |
Emissions | California EO Approved |
Part Type | Throttle Body Intake Elbows |
Product Line | Banks Power Monster-Ram Intake Elbows |
CARB EO Number(s) | D-161-143 |
Intake Elbow Type | Elbow |
Intake Elbow Color | Natural |
Intake Elbow Material | Aluminum |
Throttle Body Bore Size | 86mm |
Summit Racing Part Number | GBE-42798 |
Manufacturer's Part Number | 42798 |
Compatibility & Application Information | |
---|---|
Universal | No |
Make | RAM |
Model | 2500 |
Submodel | BIG HORN |
Beginning Year | 2013 |
Ending Year | 2018 |
Engine Type | L6 |
Engine Size | 6.7L/408 |
Engine Family | Cummins diesel inline 6-cylinder |
Intake Elbow Mounting Flange | Stock |
Throttle Body Mounting Flange (application) | Stock |
Universal | No |
Make | RAM |
Model | 2500 |
Submodel | LARAMIE |
Beginning Year | 2013 |
Ending Year | 2018 |
Engine Type | L6 |
Engine Size | 6.7L/408 |
Engine Family | Cummins diesel inline 6-cylinder |
Intake Elbow Mounting Flange | Stock |
Throttle Body Mounting Flange (application) | Stock |
Universal | No |
Make | RAM |
Model | 2500 |
Submodel | LARAMIE LIMITED |
Beginning Year | 2014 |
Ending Year | 2015 |
Engine Type | L6 |
Engine Size | 6.7L/408 |
Engine Family | Cummins diesel inline 6-cylinder |
Intake Elbow Mounting Flange | Stock |
Throttle Body Mounting Flange (application) | Stock |
Universal | No |
Make | RAM |
Model | 2500 |
Submodel | LARAMIE LONGHORN |
Beginning Year | 2013 |
Ending Year | 2018 |
Engine Type | L6 |
Engine Size | 6.7L/408 |
Engine Family | Cummins diesel inline 6-cylinder |
Intake Elbow Mounting Flange | Stock |
Throttle Body Mounting Flange (application) | Stock |
Universal | No |
Make | RAM |
Model | 2500 |
Submodel | LIMITED |
Beginning Year | 2016 |
Ending Year | 2018 |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
Banks Power 13-18 Ram 6.7L Monster-Ram Intake System Gen-2 w
SKU: gbe42798
$1,783.51
or 4 payments of $445.88 with Info
Banks Power 20-22 Chevy/GMC 2500/3500 L5P 6.6L Ram-Air Intak
SKU: gbe42266
$1,220.39
or 4 payments of $305.10 with Info
Banks Power 2007.5-2012 Ram 6.7L Monster-Ram Intake System G
SKU: gbe42797-B
$1,833.32
or 4 payments of $458.33 with Info
Short Ram Intake System (Lancer Ralliart 04-05)
SKU: 22-436R
$569.99
$599.99
or 4 payments of $142.50 with Info
69 Series Typhoon Performance Air Intake System (BRZ/86 13-2
SKU: 69-8619TS
$759.99
$799.99
or 4 payments of $190.00 with Info