Suspension Spring Kit - 2 in Lowering - Rear - Steel - Red Powder Coat - GM A-Body 1967-72 - Pair
Lowering Springs
There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks?your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step?every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag.Blending aesthetics and performance, BMR has designed the SP015 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the rear end of your 1967-1972 GM A-body 2-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension!BMR Suspensions SP015 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A.
Additional Information
These springs will lower the rear of your 1967-1972 GM A-body, and feature a fine-tuned spring rate to give you great handling and a smooth ride.
Part Type
Suspension Struts / Shock Absorbers / Coil Springs / Camber Plate Kit
Product Details
| Bushings Included: | No |
| Description: | BMR 67-72 A-Body Rear Lowering Springs - Red |
| Drop, Rear: | 2.0 inches |
| Part Number: | bmrSP015R |
| Progressive Rate Spring, Rear: | Yes |
| Quantity: | Sold as a pair |
| Spring Finish: | Red Powdercoat |
| Spring Position: | Rear |
| Spring Rate, Rear (lbs/in): | 200 lbs/in |
| Spring Type: | Coil |
| Additional Application Notes |
|---|
| • Rear |
These additional application notes are supplied by the manufacturer and collated from multiple year ranges. Not all of these notes may apply to every year or every variant. Please contact a StreetFX agent for clarification if required.
Data: v2 - Desc: v4.1 - Upd: 2026-01-16 23:53:08
