It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013-2018 Ford Focus ST.
Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus STs performance potential.
We've replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26% better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21% increase in flow to and from the intercooler.
The piping isnt the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the STs intake manifold.
The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty.
Product Features
It's time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013-2018 Ford Focus ST.
Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus STs performance potential.
We've replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26% better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21% increase in flow to and from the intercooler.
The piping isnt the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the STs intake manifold.
The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty.
Product Features
Control Arm - Bushing (Focus 11-18 / Mazda 3 09-14)
SKU: KCA465
$280.50
$330.00
or 4 payments of $70.12 with Info
Engine - Pitch Mount Bushing (Focus 05-18 / Focus 10-18 / Ma
SKU: KDT974
$323.00
$380.00
or 4 payments of $80.75 with Info
Front and Rear Coil Springs - Lowering Kit (Focus 12-18)
SKU: WSK-FRD004
$453.06
$533.01
or 4 payments of $113.27 with Info
Front Roll Centre Adjusting Spacer (Focus ST 2019+)
SKU: Q0707
$164.00
or 4 payments of $41.00 with Info