DW200 255lph In-Tank Fuel Pump w/Install Kit (WRX 94-07/STi
SKU: 9-201-0791
$149.95
or 4 payments of $37.49 with Info
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $33.71 fortnightly and receive your order now. More info
DBA’s Street Performance (SP) brake pads have been designed for drivers seeking improved braking performance over traditional O.E. brake pads. DBA Street Performance is the next step up for all vehicles, developed to provide an effective friction response to pedal application and offer low wear and dust minimisation.
The SP range is recommended for street performance vehicles, 4WD’s and SUV’s and light commercial/trade vehicles.
DBA Street Performance part numbers are denoted by the suffix (SP).
DBA’s range of Performance brake pads have been designed at the forefront of technology and quality standards. DBA has utilised a range of cutting edge features including:
1. Chamfer – Reduces noise, vibration and harshness*
2. Slot – Facilitate temperature stability
3. Premium Quality Shim – Dual layer elastomeric coated shim
4. Scorching Process (TSP) – Raises cold friction effectiveness and reduces bedding-in time
5. Backing Plate – G3131 steel – dimensionally stable and wear resistant
6. Electronic Wear Sensor – OE replacement wear sensor**
Note: Brake Pad / Calliper Hardware included where applicable.
**Electronic wear sensors included where applicable
**Where applicable
All DBA Performance brake pads are scorched on the friction surface to improve the bedding in process and minimise the onset of green fade typically experienced with new pads. Thermal Stability Profiling (TSP), a process unique to DBA, increases cold friction effectiveness and reduces bedding-in time.
The Performance pads include chamfers where required to reduce unwanted noise, vibration and harshness under braking while the centre slot facilitates temperature stability. DBA’s brake pad backing plates are made from high quality steel that is resistant to wear.
DBA also uses high quality European made, triple layer shims to enhance the pad noise dampening characteristics (included in all products).
Of course, these pads are asbestos free with no other nasty materials while at the same time keeping dust to a minimum and are gentle on wheels, with no sticky goo to scrub off.
As with all DBA products, the Performance pad range is backed up with full technical support both online and in the field.
Suits vehicles fitted with 316mm Front rotors please ensure you measure prior to ordering.
Some vehicles equipped with this brake pad / rotor size combo
DBA’s Street Performance (SP) brake pads have been designed for drivers seeking improved braking performance over traditional O.E. brake pads. DBA Street Performance is the next step up for all vehicles, developed to provide an effective friction response to pedal application and offer low wear and dust minimisation.
The SP range is recommended for street performance vehicles, 4WD’s and SUV’s and light commercial/trade vehicles.
DBA Street Performance part numbers are denoted by the suffix (SP).
DBA’s range of Performance brake pads have been designed at the forefront of technology and quality standards. DBA has utilised a range of cutting edge features including:
1. Chamfer – Reduces noise, vibration and harshness*
2. Slot – Facilitate temperature stability
3. Premium Quality Shim – Dual layer elastomeric coated shim
4. Scorching Process (TSP) – Raises cold friction effectiveness and reduces bedding-in time
5. Backing Plate – G3131 steel – dimensionally stable and wear resistant
6. Electronic Wear Sensor – OE replacement wear sensor**
Note: Brake Pad / Calliper Hardware included where applicable.
**Electronic wear sensors included where applicable
**Where applicable
All DBA Performance brake pads are scorched on the friction surface to improve the bedding in process and minimise the onset of green fade typically experienced with new pads. Thermal Stability Profiling (TSP), a process unique to DBA, increases cold friction effectiveness and reduces bedding-in time.
The Performance pads include chamfers where required to reduce unwanted noise, vibration and harshness under braking while the centre slot facilitates temperature stability. DBA’s brake pad backing plates are made from high quality steel that is resistant to wear.
DBA also uses high quality European made, triple layer shims to enhance the pad noise dampening characteristics (included in all products).
Of course, these pads are asbestos free with no other nasty materials while at the same time keeping dust to a minimum and are gentle on wheels, with no sticky goo to scrub off.
As with all DBA products, the Performance pad range is backed up with full technical support both online and in the field.
Suits vehicles fitted with 316mm Front rotors please ensure you measure prior to ordering.
Some vehicles equipped with this brake pad / rotor size combo
DW200 255lph In-Tank Fuel Pump w/Install Kit (WRX 94-07/STi
SKU: 9-201-0791
$149.95
or 4 payments of $37.49 with Info
DW300 340lph In-Tank Fuel Pump w/Install Kit (WRX 94-07/STi
SKU: 9-301-0791
$239.95
or 4 payments of $59.99 with Info
2.5in Cat-Back Exhaust - Raw 409 Stainless (Liberty Gen 4 04
SKU: E4-SL07-CBS
$539.10
$599.00
or 4 payments of $134.78 with Info
3in Cat-Back Exhaust - Raw 409 Stainless Steel (Liberty GT 0
SKU: E4-SL05-CBS
$719.10
$799.00
or 4 payments of $179.78 with Info
415lph In-Tank Fuel Pump w/ 9-1041 Install Kit (Forester 97-
SKU: 9-401-1041
$339.95
or 4 payments of $84.99 with Info