Front Sway Bar - 24mm Heavy Duty (Holden HK, HT, HG 67-71)
SKU: BHF6
$285.00
or 4 payments of $71.25 with Info
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $35.68 fortnightly and receive your order now. More info
RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.440 in. mounting width ball with a .570 in. thru bolt hole. Finished in gold zinc plating.
This product is designed and tested for the US Domestic Market to comply with relevant US standards. Consequently, it may have features that are not compatible or compliant with regulations outside the US. As such, this item is offered for off-road use. Please contact a Support agent for more information if required.
Johnny Joint® Rod End; 2 1/2 in.; Forged; 2.440 in. x .570 in. Ball; 1 1/4 in. 12 RH Threaded Shank; Externally Greased;
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. This specific joint is a 2 1/2 in. diameter, fitted with a zerk fitting for greasing, 2.3 in. of 1 1/4 in.-12 right hand threads on the shank, and a 2.440 in. mounting width ball with a .570 in. thru bolt hole. Finished in gold zinc plating.
This product is designed and tested for the US Domestic Market to comply with relevant US standards. Consequently, it may have features that are not compatible or compliant with regulations outside the US. As such, this item is offered for off-road use. Please contact a Support agent for more information if required.
Johnny Joint® Rod End; 2 1/2 in.; Forged; 2.440 in. x .570 in. Ball; 1 1/4 in. 12 RH Threaded Shank; Externally Greased;
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
Front Sway Bar - 24mm Heavy Duty (Holden HK, HT, HG 67-71)
SKU: BHF6
$285.00
or 4 payments of $71.25 with Info
Spring - Pad Lower/Upper Bushing (Ford inc BA-BF, FG, Territ
SKU: W72718
$34.00
or 4 payments of $8.50 with Info
Sway Bar Mount Bush Kit 16mm - Rear (Camry/Corolla/Sprinter)
SKU: SPF0199-16K
$34.55
or 4 payments of $8.64 with Info
Eccentric Lockout Kit (FR-S/BRZ/WRX EL FRS)
SKU: SPL-EL-FRS
$132.35
or 4 payments of $33.09 with Info