Recirculation-Style Water/Methanol Injection Pump
SKU: 30-3015
$280.20
$294.95
or 4 payments of $70.05 with Info
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $345.80 fortnightly and receive your order now. More info
The Snow Performance Stage 3 Boost Cooler? brings true 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel pressure sensor input to deliver a extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage 3 Boost Cooler? controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling . Comes with adjustable Stage 3 water-meth controller, 1/4" High Temp Nylon line and easy to install quick-connect fittings.
Stage 3 Boost Cooler Direct Injected 2D MAP Progressive Water-Methanol Injection Kit (Red High Temp Nylon, Quick-Connect Fittings)
All Forced Induction Gasoline Engines
Nitrous Oxide Injection System Kit
These Snow Performance Stage-3 gasoline boost cooler kits are unmatched for accuracy and adjustability in water-methanol injection systems. These systems can be used on any EFI engine--naturally aspirated or forced induction--and any forced induction application. They can read and inject according to either EFI fuel injector pulse-width or boost level, or any combination of both! Extremely easy to set up and dial in, the software creates a two-dimensional delivery map from just a few easy-to-set start and full points that you punch in. The LCD screen displays boost pressure and injector pulse width percentage, as well as water-methanol injection percentage. Quick, easy, positive adjustments are made with two push buttons. Their low-profile design allows for easy-to-view and discrete mounting.
Kits include:
Brand | Snow Performance |
Manufacturer's Part Number | 320 |
Part Type | Water/Methanol Injection Systems |
Product Line | Snow Performance Boost Cooler Stage-3 Gasoline Kits |
Summit Racing Part Number | SNO-320 |
UPC | 653374500289 |
Water Injection Pump Included | Yes |
Wiring Harness Included | Yes |
Boost Pressure Reference Switch Included | No |
Reservoir Included | Yes |
Reservoir Volume | 3 quart |
Quantity | Sold as a kit. |
Notes | Fits direct injection/boosted engines. Includes digital variable mapping controller. |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
The Snow Performance Stage 3 Boost Cooler? brings true 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2D injection map based off boost and fuel pressure sensor input to deliver a extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage 3 Boost Cooler? controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25 points for maximum HP and cooling . Comes with adjustable Stage 3 water-meth controller, 1/4" High Temp Nylon line and easy to install quick-connect fittings.
Stage 3 Boost Cooler Direct Injected 2D MAP Progressive Water-Methanol Injection Kit (Red High Temp Nylon, Quick-Connect Fittings)
All Forced Induction Gasoline Engines
Nitrous Oxide Injection System Kit
These Snow Performance Stage-3 gasoline boost cooler kits are unmatched for accuracy and adjustability in water-methanol injection systems. These systems can be used on any EFI engine--naturally aspirated or forced induction--and any forced induction application. They can read and inject according to either EFI fuel injector pulse-width or boost level, or any combination of both! Extremely easy to set up and dial in, the software creates a two-dimensional delivery map from just a few easy-to-set start and full points that you punch in. The LCD screen displays boost pressure and injector pulse width percentage, as well as water-methanol injection percentage. Quick, easy, positive adjustments are made with two push buttons. Their low-profile design allows for easy-to-view and discrete mounting.
Kits include:
Brand | Snow Performance |
Manufacturer's Part Number | 320 |
Part Type | Water/Methanol Injection Systems |
Product Line | Snow Performance Boost Cooler Stage-3 Gasoline Kits |
Summit Racing Part Number | SNO-320 |
UPC | 653374500289 |
Water Injection Pump Included | Yes |
Wiring Harness Included | Yes |
Boost Pressure Reference Switch Included | No |
Reservoir Included | Yes |
Reservoir Volume | 3 quart |
Quantity | Sold as a kit. |
Notes | Fits direct injection/boosted engines. Includes digital variable mapping controller. |
We do not have any specific fitment data for this part. This could be a generic item or if you need further clarification, please contact us for details to assist us with your compatibility requirements.
Recirculation-Style Water/Methanol Injection Pump
SKU: 30-3015
$280.20
$294.95
or 4 payments of $70.05 with Info
V3 Water/Methanol Nozzle and Swirl Generator Kit
SKU: 30-3315
$142.45
$149.95
or 4 payments of $35.61 with Info
Water/Methanol Injection In-Line Filter
SKU: 30-3003
$66.45
$69.95
or 4 payments of $16.61 with Info
1.15 Gallon Tank Kit W/Anti-Starvation Chamber, Fluid Level
SKU: 30-3325
$227.95
$239.95
or 4 payments of $56.99 with Info
AEM Conductive Fluid Level Sensor and Flying Lead Connector
SKU: aem30-3322
$91.74
or 4 payments of $22.93 with Info