2 x 4000 Series T3 Slotted Brake Rotor - Front (Stinger 2017
SKU: DBA43342S.
$987.60
or 4 payments of $246.90 with Info
Shop now. Pay Later. Interest Free.
Make 4 interest-free payments of $124.75 fortnightly and receive your order now. More info
E-Coated Finish
Most StopTech® Rotors are finished with black e-coating on both sides of the hat, inside the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
Power Alloy Metallurgy
Power Alloy metallurgy is an exclusive feature of many StopTech® rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
Cooling Vane Design
stoptech-drilled-slotted-brake-rotorNearly all StopTech® 1-piece rotors have unique slot or hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
Kit contains both Left and Right Brake Rotors
E-Coated Finish
Most StopTech® Rotors are finished with black e-coating on both sides of the hat, inside the cooling vanes, and on the outside edge. E-coating is a superior electro-statically applied finish designed to withstand 400 hours of salt water exposure without rusting. This is especially important on both mounting faces of the hat where it touches the hub flange and back face of the wheel. Any accumulation of rust in these area can lead to installed lateral run out issues.
Power Alloy Metallurgy
Power Alloy metallurgy is an exclusive feature of many StopTech® rotors. In specific vehicle applications, StopTech works with foundry partners to increase the molybdenum or carbon content of the castings, and to carefully control the cooling rate during production to reach targets for hardness and tensile strength.
Cooling Vane Design
stoptech-drilled-slotted-brake-rotorNearly all StopTech® 1-piece rotors have unique slot or hole patterns for the left and right sides of the vehicle. For these directional patterns, straight vane or pillar vane rotors are used to ensure that a drilled hole never touches a cooling vane.
Kit contains both Left and Right Brake Rotors
2 x 4000 Series T3 Slotted Brake Rotor - Front (Stinger 2017
SKU: DBA43342S.
$987.60
or 4 payments of $246.90 with Info
2 x 4000 Series T3 Slotted Brake Rotor ÔÇô Rear (Stinger 201
SKU: DBA43343S.
$674.40
or 4 payments of $168.60 with Info
Street Series 2x Standard Front Rotors (Mazda RX7 FC 86-91)
SKU: DBA636.
$230.20
or 4 payments of $57.55 with Info
Street Series 2x Standard Front Rotors (Nissan Pulsar N15 91
SKU: DBA899.
$148.80
or 4 payments of $37.20 with Info